Padauk Padouk Planed Timber 4x4x8 Feet
Planed square-edge timber from Padauk (Pterocarpus spp.), 4x4x8 feet, sawn or chipped lengthwise with thickness over 6mm. Specifically listed under HTS 4407.29.02.40 for its exceptional strength and colorfastness in musical instruments and decking.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If worked into turned or molded articles
Advanced working beyond planing (e.g., lathe-turned) enters 4421 for other wood articles.
If Ipe or other dark red tropical meranti species
Similar appearance woods have distinct statistical suffixes under 4407.29.
If for bamboo or woody material equivalents
Chapter note includes bamboo; if bamboo-mixed, may classify under 4412 plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use graded stamps (e.g
• NHLA standards) for quality verification during customs
• Separate from other tropicals in manifests to maintain specific subheading classification
• Prepare for potential USDA APHIS inspections due to tropical wood pest risks
Related Products under HTS 4407.29.02.40
Andiroba Sawn Lumber 1x8x12
Thickness-planed sawn lumber from Andiroba (Carapa guianensis), measuring 1 inch thick, 8 inches wide, and 12 feet long, exceeding 6mm thickness. Classified under HTS 4407.29.02.40 as sawn or chipped lengthwise tropical wood of specified species, suitable for high-end furniture and cabinetry due to its durability and rich reddish-brown color.
Padauk Sliced Veneer Panels 1/16 Inch Thick
Sliced lengthwise veneer panels from Padauk (Pterocarpus soyauxii), approximately 1/16 inch (over 6mm in aggregate use), sanded for smoothness. Falls under HTS 4407.29.02.40 as peeled or sliced tropical wood of named species, prized for its vibrant orange-red color in decorative paneling.
Andiroba End-Jointed Lumber Boards 2x10x10
End-jointed and sanded lumber boards from Andiroba (Carapa procera), 2x10x10 feet, thickness exceeding 6mm, sawn lengthwise. HTS 4407.29.02.40 covers this finger-jointed tropical hardwood used in boat building and fine joinery for its oil-rich, rot-resistant properties.
Andiroba Quarter-Sawn Lumber 1x6x16
Quarter-sawn lumber from Andiroba (Carapa guianensis), 1x6x16 feet, planed and sanded, thickness exceeding 6mm. HTS 4407.29.02.40 applies to this lengthwise-sawn tropical wood valued for straight grain in architectural millwork.
Burmese Padauk Sawn Planks 2x12x12
Sawn planks from Burmese Padauk (Pterocarpus macrocarpus), 2 inches thick by 12 inches wide by 12 feet, end-jointed. Classified in HTS 4407.29.02.40 as specified tropical sawn wood, ideal for turnery and boat interiors.
Padauk Guitar Neck Blanks Sawn 1.5x3x24 Inch
Rough-sawn guitar neck blanks from Padauk, 1.5x3x24 inches, exceeding 6mm thickness, lengthwise cut. HTS 4407.29.02.40 for this tropical hardwood blank used in luthiery for its tonal qualities and stability.