Andiroba Sawn Lumber 1x8x12
Thickness-planed sawn lumber from Andiroba (Carapa guianensis), measuring 1 inch thick, 8 inches wide, and 12 feet long, exceeding 6mm thickness. Classified under HTS 4407.29.02.40 as sawn or chipped lengthwise tropical wood of specified species, suitable for high-end furniture and cabinetry due to its durability and rich reddish-brown color.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further machined into profiled or tongue-and-grooved boards
Advanced machining beyond planing/sanding moves it to 4408 for profiled tropical wood.
If densified or chemically treated
Densified or treated plywood/veneer forms from these species fall under Chapter 44 densified wood.
If other tropical species not specifically named like Andiroba or Padauk
Generic tropical sawn wood without species specificity uses the broader 4407.29 basket.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain CITES certification if required for Andiroba species; verify export permits from origin country like Brazil
• Provide botanical identification documentation confirming Carapa guianensis to avoid misclassification
• Ensure accurate thickness measurement (>6mm) and lengthwise sawing proof to qualify under 4407
Related Products under HTS 4407.29.02.40
Padauk Sliced Veneer Panels 1/16 Inch Thick
Sliced lengthwise veneer panels from Padauk (Pterocarpus soyauxii), approximately 1/16 inch (over 6mm in aggregate use), sanded for smoothness. Falls under HTS 4407.29.02.40 as peeled or sliced tropical wood of named species, prized for its vibrant orange-red color in decorative paneling.
Andiroba End-Jointed Lumber Boards 2x10x10
End-jointed and sanded lumber boards from Andiroba (Carapa procera), 2x10x10 feet, thickness exceeding 6mm, sawn lengthwise. HTS 4407.29.02.40 covers this finger-jointed tropical hardwood used in boat building and fine joinery for its oil-rich, rot-resistant properties.
Padauk Padouk Planed Timber 4x4x8 Feet
Planed square-edge timber from Padauk (Pterocarpus spp.), 4x4x8 feet, sawn or chipped lengthwise with thickness over 6mm. Specifically listed under HTS 4407.29.02.40 for its exceptional strength and colorfastness in musical instruments and decking.
Andiroba Quarter-Sawn Lumber 1x6x16
Quarter-sawn lumber from Andiroba (Carapa guianensis), 1x6x16 feet, planed and sanded, thickness exceeding 6mm. HTS 4407.29.02.40 applies to this lengthwise-sawn tropical wood valued for straight grain in architectural millwork.
Burmese Padauk Sawn Planks 2x12x12
Sawn planks from Burmese Padauk (Pterocarpus macrocarpus), 2 inches thick by 12 inches wide by 12 feet, end-jointed. Classified in HTS 4407.29.02.40 as specified tropical sawn wood, ideal for turnery and boat interiors.
Padauk Guitar Neck Blanks Sawn 1.5x3x24 Inch
Rough-sawn guitar neck blanks from Padauk, 1.5x3x24 inches, exceeding 6mm thickness, lengthwise cut. HTS 4407.29.02.40 for this tropical hardwood blank used in luthiery for its tonal qualities and stability.