Andiroba Quarter-Sawn Lumber 1x6x16
Quarter-sawn lumber from Andiroba (Carapa guianensis), 1x6x16 feet, planed and sanded, thickness exceeding 6mm. HTS 4407.29.02.40 applies to this lengthwise-sawn tropical wood valued for straight grain in architectural millwork.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If processed into qualifying wood pellets
By-products agglomerated into pellets from these woods fall under 4401 fuel wood.
If formed into tools with working parts
Chapter note excludes Chapter 82 tools; assembled tools go to 4417.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide sawmill certificates showing lengthwise quarter-sawing process
• Declare exact dimensions; under 6mm shifts to veneer headings
• Bundle securely to prevent damage claims affecting duty assessments
Related Products under HTS 4407.29.02.40
Andiroba Sawn Lumber 1x8x12
Thickness-planed sawn lumber from Andiroba (Carapa guianensis), measuring 1 inch thick, 8 inches wide, and 12 feet long, exceeding 6mm thickness. Classified under HTS 4407.29.02.40 as sawn or chipped lengthwise tropical wood of specified species, suitable for high-end furniture and cabinetry due to its durability and rich reddish-brown color.
Padauk Sliced Veneer Panels 1/16 Inch Thick
Sliced lengthwise veneer panels from Padauk (Pterocarpus soyauxii), approximately 1/16 inch (over 6mm in aggregate use), sanded for smoothness. Falls under HTS 4407.29.02.40 as peeled or sliced tropical wood of named species, prized for its vibrant orange-red color in decorative paneling.
Andiroba End-Jointed Lumber Boards 2x10x10
End-jointed and sanded lumber boards from Andiroba (Carapa procera), 2x10x10 feet, thickness exceeding 6mm, sawn lengthwise. HTS 4407.29.02.40 covers this finger-jointed tropical hardwood used in boat building and fine joinery for its oil-rich, rot-resistant properties.
Padauk Padouk Planed Timber 4x4x8 Feet
Planed square-edge timber from Padauk (Pterocarpus spp.), 4x4x8 feet, sawn or chipped lengthwise with thickness over 6mm. Specifically listed under HTS 4407.29.02.40 for its exceptional strength and colorfastness in musical instruments and decking.
Burmese Padauk Sawn Planks 2x12x12
Sawn planks from Burmese Padauk (Pterocarpus macrocarpus), 2 inches thick by 12 inches wide by 12 feet, end-jointed. Classified in HTS 4407.29.02.40 as specified tropical sawn wood, ideal for turnery and boat interiors.
Padauk Guitar Neck Blanks Sawn 1.5x3x24 Inch
Rough-sawn guitar neck blanks from Padauk, 1.5x3x24 inches, exceeding 6mm thickness, lengthwise cut. HTS 4407.29.02.40 for this tropical hardwood blank used in luthiery for its tonal qualities and stability.