Slash Pine Dimension Lumber
Planed dimension lumber from Pinus elliottii (slash pine), 19x89mm for framing, untreated, thickness exceeding 6mm. Fits HTS 4407.11.0053 as other sawn pine, coniferous, not treated.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made into briquettes
Slash pine sawdust compressed into >25mm briquettes becomes fuel briquettes.
If laminated into blocks
Engineered glued slash pine becomes laminated wood blocks.
If customized for industrial use
Specially machined pine pieces may classify as other worked wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Monitor Commerce Department softwood lumber investigations for additional duties
• Use heat-treated shipping containers for pine to satisfy bark-free requirements
• Provide genetic testing if species purity questioned by CBP
Related Products under HTS 4407.11.00.53
Sawn Scots Pine Lumber 2x4
Kiln-dried sawn lumber from Pinus sylvestris (Scots pine), measuring 38mm x 89mm x random lengths exceeding 6mm thickness, planed on four sides. Classified under HTS 4407.11.0053 as 'other' pine wood sawn lengthwise, not chemically treated, for general construction use.
Radiata Pine Sawn Boards 1x6
Sawn boards from Pinus radiata, thickness 19mm x 140mm width, sanded surface, untreated, used for furniture framing. Falls under HTS 4407.11.0053 as other coniferous pine sawn lengthwise exceeding 6mm, not treated.
Lodgepole Pine Planks S4S
Surfaced four sides (S4S) planks from Pinus contorta (lodgepole pine), 25mm thick x 150mm wide, end-trimmed, untreated for interior joinery. HTS 4407.11.0053 covers this other pine category, sawn or chipped lengthwise over 6mm.
Ponderosa Pine Studs 2x6
Construction-grade studs from Pinus ponderosa, nominal 38x140mm, planed and sanded, untreated, sawn lengthwise. Classified in HTS 4407.11.0053 as other untreated pine exceeding 6mm thickness.
Jack Pine Sawn Timber FAS Grade
First and Seconds (FAS) grade sawn timber from Pinus banksiana (jack pine), 32mm thick x 200mm wide x 3m lengths, air-dried untreated. HTS 4407.11.0053 for other pine sawn lengthwise over 6mm, coniferous.
Eastern White Pine Boards
S4S boards from Pinus strobus, 25mm x 184mm x 2.4m, sanded, untreated for cabinetry. HTS 4407.11.0053 applies to this other white pine sawn lengthwise exceeding 6mm thickness.