Ponderosa Pine Studs 2x6
Construction-grade studs from Pinus ponderosa, nominal 38x140mm, planed and sanded, untreated, sawn lengthwise. Classified in HTS 4407.11.0053 as other untreated pine exceeding 6mm thickness.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from Hem-fir mixed stands
Pine mixed with hemlock/fir of unknown proportion becomes Hem-fir classification.
If pallet-quality with notches
Pine lumber cut for pallet components may classify as pallet pallets.
If painted or coated
Surface-coated pine studs become painted/stained wood articles.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Comply with USITC softwood lumber duties; file proper entry summary
• Mark kiln-dried (KD) stamps clearly; moisture content critical for studs
• Separate from hemlock/fir shipments to prevent S-P-F misclassification
Related Products under HTS 4407.11.00.53
Sawn Scots Pine Lumber 2x4
Kiln-dried sawn lumber from Pinus sylvestris (Scots pine), measuring 38mm x 89mm x random lengths exceeding 6mm thickness, planed on four sides. Classified under HTS 4407.11.0053 as 'other' pine wood sawn lengthwise, not chemically treated, for general construction use.
Radiata Pine Sawn Boards 1x6
Sawn boards from Pinus radiata, thickness 19mm x 140mm width, sanded surface, untreated, used for furniture framing. Falls under HTS 4407.11.0053 as other coniferous pine sawn lengthwise exceeding 6mm, not treated.
Lodgepole Pine Planks S4S
Surfaced four sides (S4S) planks from Pinus contorta (lodgepole pine), 25mm thick x 150mm wide, end-trimmed, untreated for interior joinery. HTS 4407.11.0053 covers this other pine category, sawn or chipped lengthwise over 6mm.
Jack Pine Sawn Timber FAS Grade
First and Seconds (FAS) grade sawn timber from Pinus banksiana (jack pine), 32mm thick x 200mm wide x 3m lengths, air-dried untreated. HTS 4407.11.0053 for other pine sawn lengthwise over 6mm, coniferous.
Slash Pine Dimension Lumber
Planed dimension lumber from Pinus elliottii (slash pine), 19x89mm for framing, untreated, thickness exceeding 6mm. Fits HTS 4407.11.0053 as other sawn pine, coniferous, not treated.
Eastern White Pine Boards
S4S boards from Pinus strobus, 25mm x 184mm x 2.4m, sanded, untreated for cabinetry. HTS 4407.11.0053 applies to this other white pine sawn lengthwise exceeding 6mm thickness.