Eastern White Pine Boards
S4S boards from Pinus strobus, 25mm x 184mm x 2.4m, sanded, untreated for cabinetry. HTS 4407.11.0053 applies to this other white pine sawn lengthwise exceeding 6mm thickness.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sanded to under 6mm final thickness
Thinner sanded pine sheets fall under other coniferous sawn wood.
If cellular reconstructed panels
Engineered white pine panels from exploded fibers classify as cellular wood.
If made into wooden sticks
Pine cut into uniform sticks for further processing becomes Chapter 44 sticks.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• White pine requires specific grading; use WWPA stamps for verification
• Test for blue stain fungus; may trigger additional treatment requirements
• Declare as 'white pine' precisely to avoid generic pine reclassification
Related Products under HTS 4407.11.00.53
Sawn Scots Pine Lumber 2x4
Kiln-dried sawn lumber from Pinus sylvestris (Scots pine), measuring 38mm x 89mm x random lengths exceeding 6mm thickness, planed on four sides. Classified under HTS 4407.11.0053 as 'other' pine wood sawn lengthwise, not chemically treated, for general construction use.
Radiata Pine Sawn Boards 1x6
Sawn boards from Pinus radiata, thickness 19mm x 140mm width, sanded surface, untreated, used for furniture framing. Falls under HTS 4407.11.0053 as other coniferous pine sawn lengthwise exceeding 6mm, not treated.
Lodgepole Pine Planks S4S
Surfaced four sides (S4S) planks from Pinus contorta (lodgepole pine), 25mm thick x 150mm wide, end-trimmed, untreated for interior joinery. HTS 4407.11.0053 covers this other pine category, sawn or chipped lengthwise over 6mm.
Ponderosa Pine Studs 2x6
Construction-grade studs from Pinus ponderosa, nominal 38x140mm, planed and sanded, untreated, sawn lengthwise. Classified in HTS 4407.11.0053 as other untreated pine exceeding 6mm thickness.
Jack Pine Sawn Timber FAS Grade
First and Seconds (FAS) grade sawn timber from Pinus banksiana (jack pine), 32mm thick x 200mm wide x 3m lengths, air-dried untreated. HTS 4407.11.0053 for other pine sawn lengthwise over 6mm, coniferous.
Slash Pine Dimension Lumber
Planed dimension lumber from Pinus elliottii (slash pine), 19x89mm for framing, untreated, thickness exceeding 6mm. Fits HTS 4407.11.0053 as other sawn pine, coniferous, not treated.