Air-Dried Ponderosa Pine Dimension Stock
Air-dried ponderosa pine 5/4 x 6 dimension stock for custom furniture fabrication. 4407.11.0049 applies to this planed, untreated sawn lumber exceeding 6mm thickness, categorized as 'other' ponderosa pine. 12-15% moisture content.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If southern yellow pine instead
Regional pine species have prioritized statistical reporting.
If made into plywood from planking
Plywood production from sawn pine veneers classified under 4412.
If ground into briquettes
Wood waste agglomerated into briquettes per subheading note goes to 4401.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document air-drying duration and conditions to prove stability
• Separate FAS (Firsts and Seconds) grades from select structural grades
• Watch for end-checking that could affect yield calculations
Related Products under HTS 4407.11.00.49
Sawn Ponderosa Pine Lumber 2x4
Rough-sawn ponderosa pine (Pinus ponderosa) lumber measuring 1.5 inches thick by 3.5 inches wide, planed on two sides for construction use. Classified under HTS 4407.11.0049 as sawn coniferous wood of ponderosa pine, thickness exceeding 6mm, untreated. Meets the 'other' specification beyond standard dimension lumber categories.
Ponderosa Pine S4S Boards 1x6
Surfaced four sides (S4S) ponderosa pine boards, 3/4 inch thick by 5-1/2 inches wide, kiln-dried for interior paneling. Falls under 4407.11.0049 as planed, sanded coniferous pine lumber exceeding 6mm thickness, untreated with chemicals. Specifically categorized as 'other' ponderosa pine beyond framing dimensions.
Untreated Ponderosa Pine Beams 4x8
Large sawn ponderosa pine beams, 3-1/2 inches thick by 7-1/4 inches wide, rough sawn for structural timber applications. HTS 4407.11.0049 applies to this untreated, thickness-exceeding-6mm coniferous pine lumber of the 'other' Ponderosa category. Ideal for exposed beam construction.
Planed Ponderosa Pine Shiplap Siding
Planed ponderosa pine shiplap siding boards, 3/4 inch thick, with overlapping edges for exterior wall cladding. Classified in 4407.11.0049 as 'other' untreated sawn/chipped coniferous pine >6mm thick, sanded but not profiled beyond basic planing. Meets residential siding specifications.
Kiln-Dried Ponderosa Pine Cabinet Lumber
Kiln-dried ponderosa pine lumber, 1 inch thick by 4-6 inches wide, surfaced for furniture and cabinet making. HTS 4407.11.0049 covers this planed/sanded, untreated ponderosa pine sawn lengthwise exceeding 6mm. Selected for clear grain and workability.
Rough Sawn Ponderosa Pine Timbers 6x6
Rough sawn ponderosa pine timbers, 5.5 inches square, for post-and-beam construction. Falls under HTS 4407.11.0049 as untreated, sawn coniferous ponderosa pine >6mm thick in 'other' category. Air-dried to stable moisture content.