Untreated Ponderosa Pine Beams 4x8
Large sawn ponderosa pine beams, 3-1/2 inches thick by 7-1/4 inches wide, rough sawn for structural timber applications. HTS 4407.11.0049 applies to this untreated, thickness-exceeding-6mm coniferous pine lumber of the 'other' Ponderosa category. Ideal for exposed beam construction.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from S-P-F mixed stands
Spruce-pine-fir mixes have dedicated subheadings per chapter notes.
If assembled into trusses or beams
Fabricated wooden structural components fall under heading 4418.
If processed into wood pellets
Wood by-products agglomerated into pellets move to fuel wood heading 4401.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Conduct grade stamping per American Lumber Standard Committee (ALSC) rules before entry
• Ensure no heat or chemical treatment; fumigation records must specify method used
• Measure actual sawn thickness post-planing to confirm >6mm classification threshold
Related Products under HTS 4407.11.00.49
Sawn Ponderosa Pine Lumber 2x4
Rough-sawn ponderosa pine (Pinus ponderosa) lumber measuring 1.5 inches thick by 3.5 inches wide, planed on two sides for construction use. Classified under HTS 4407.11.0049 as sawn coniferous wood of ponderosa pine, thickness exceeding 6mm, untreated. Meets the 'other' specification beyond standard dimension lumber categories.
Ponderosa Pine S4S Boards 1x6
Surfaced four sides (S4S) ponderosa pine boards, 3/4 inch thick by 5-1/2 inches wide, kiln-dried for interior paneling. Falls under 4407.11.0049 as planed, sanded coniferous pine lumber exceeding 6mm thickness, untreated with chemicals. Specifically categorized as 'other' ponderosa pine beyond framing dimensions.
Planed Ponderosa Pine Shiplap Siding
Planed ponderosa pine shiplap siding boards, 3/4 inch thick, with overlapping edges for exterior wall cladding. Classified in 4407.11.0049 as 'other' untreated sawn/chipped coniferous pine >6mm thick, sanded but not profiled beyond basic planing. Meets residential siding specifications.
Kiln-Dried Ponderosa Pine Cabinet Lumber
Kiln-dried ponderosa pine lumber, 1 inch thick by 4-6 inches wide, surfaced for furniture and cabinet making. HTS 4407.11.0049 covers this planed/sanded, untreated ponderosa pine sawn lengthwise exceeding 6mm. Selected for clear grain and workability.
Rough Sawn Ponderosa Pine Timbers 6x6
Rough sawn ponderosa pine timbers, 5.5 inches square, for post-and-beam construction. Falls under HTS 4407.11.0049 as untreated, sawn coniferous ponderosa pine >6mm thick in 'other' category. Air-dried to stable moisture content.
Sanded Ponderosa Pine Trim Boards
Sanded ponderosa pine trim boards, 3/4 x 4 inches, for interior molding and baseboards. Classified 4407.11.0049 as planed/sanded untreated ponderosa pine lumber >6mm, 'other' specification. Primed-ready but chemical-free surface.