Ponderosa Pine S4S Boards 1x6
Surfaced four sides (S4S) ponderosa pine boards, 3/4 inch thick by 5-1/2 inches wide, kiln-dried for interior paneling. Falls under 4407.11.0049 as planed, sanded coniferous pine lumber exceeding 6mm thickness, untreated with chemicals. Specifically categorized as 'other' ponderosa pine beyond framing dimensions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If primarily lodgepole pine variety
Different Pinus spp. sub-varieties have separate statistical suffixes.
If further machined into boards >6mm thick
Profiled or patterned sawn wood shifts to Chapter 44 continuity-machined products.
If laminated into plywood panels
Laminated coniferous wood products classified as plywood under heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide kiln-drying certificates showing moisture content below 19% to meet building code requirements
• Label shipments clearly with species (Pinus ponderosa) to prevent misclassification as generic pine
• Check for softwood lumber duties under specific trade remedies applicable to coniferous imports
Related Products under HTS 4407.11.00.49
Sawn Ponderosa Pine Lumber 2x4
Rough-sawn ponderosa pine (Pinus ponderosa) lumber measuring 1.5 inches thick by 3.5 inches wide, planed on two sides for construction use. Classified under HTS 4407.11.0049 as sawn coniferous wood of ponderosa pine, thickness exceeding 6mm, untreated. Meets the 'other' specification beyond standard dimension lumber categories.
Untreated Ponderosa Pine Beams 4x8
Large sawn ponderosa pine beams, 3-1/2 inches thick by 7-1/4 inches wide, rough sawn for structural timber applications. HTS 4407.11.0049 applies to this untreated, thickness-exceeding-6mm coniferous pine lumber of the 'other' Ponderosa category. Ideal for exposed beam construction.
Planed Ponderosa Pine Shiplap Siding
Planed ponderosa pine shiplap siding boards, 3/4 inch thick, with overlapping edges for exterior wall cladding. Classified in 4407.11.0049 as 'other' untreated sawn/chipped coniferous pine >6mm thick, sanded but not profiled beyond basic planing. Meets residential siding specifications.
Kiln-Dried Ponderosa Pine Cabinet Lumber
Kiln-dried ponderosa pine lumber, 1 inch thick by 4-6 inches wide, surfaced for furniture and cabinet making. HTS 4407.11.0049 covers this planed/sanded, untreated ponderosa pine sawn lengthwise exceeding 6mm. Selected for clear grain and workability.
Rough Sawn Ponderosa Pine Timbers 6x6
Rough sawn ponderosa pine timbers, 5.5 inches square, for post-and-beam construction. Falls under HTS 4407.11.0049 as untreated, sawn coniferous ponderosa pine >6mm thick in 'other' category. Air-dried to stable moisture content.
Sanded Ponderosa Pine Trim Boards
Sanded ponderosa pine trim boards, 3/4 x 4 inches, for interior molding and baseboards. Classified 4407.11.0049 as planed/sanded untreated ponderosa pine lumber >6mm, 'other' specification. Primed-ready but chemical-free surface.