Large Birch Timber Blocks
Roughly squared birch wood blocks from Betula spp., each with smallest cross-section 15 cm or greater, suitable for furniture lumber. Classified in HTS 4403.95.01 due to rough state and birch species with specified large dimensions.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If plywood made from these birch sheets
Processed into veneered panels or plywood shifts to 4412.
If further machined into sheets for veneers
Dark red meranti or similar processing moves to veneer sheets (4408).
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure rough squaring doesn't exceed tolerances that would classify as 'sawn' under Chapter 44 notes
• Provide origin certificates to distinguish from smaller dimension birch under 4403.95.00
• Comply with fumigation rules for rough wood to prevent pest introduction
Related Products under HTS 4403.95.01
Birch Logs for Veneer Production
Rough-cut birch (Betula spp.) logs with a minimum cross-sectional dimension of 15 cm, stripped of bark but not further processed. These fall under HTS 4403.95.01 as wood in the rough, specifically birch meeting the size requirement for large timber used in high-quality veneer slicing.
Birch Sawn Flitches in Rough Form
Rough birch flitches (Betula spp.) with minimum 15 cm cross-section, minimally squared for log stability during transport. HTS 4403.95.01 applies as these are wood in the rough, not yet finely sawn or planed.
Industrial Birch Cant Blocks
Large cant blocks of birch (Betula spp.) in rough-squared condition, smallest cross-section 15 cm+, used for beam production. Fits HTS 4403.95.01 for oversized birch rough wood from mechanical processing.
Birch Roundwood for Pulpwood
Unstripped or partially debarked birch roundwood (Betula spp.), diameter 15 cm minimum cross-section, destined for pulp mills. HTS 4403.95.01 covers this large-dimension birch in rough state.
Oversized Birch Debarked Logs
Debarked birch logs (Betula spp.) with smallest cross-section 15 cm or more, in rough form for sawmill feed. Precisely matches HTS 4403.95.01 for large birch rough wood.