Birch Logs for Veneer Production
Rough-cut birch (Betula spp.) logs with a minimum cross-sectional dimension of 15 cm, stripped of bark but not further processed. These fall under HTS 4403.95.01 as wood in the rough, specifically birch meeting the size requirement for large timber used in high-quality veneer slicing.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not birch but other temperate hardwood species
Different species like oak or maple classify under other wood subheadings in 4403.99.
If sawn lengthwise and thickness over 6mm
Once sawn or planed, it moves from 'rough' (4403) to coniferous sawn wood (4407).
If processed into compressed wood pellets
Agglomerated by-products like sawdust from birch become fuel pellets under 4401.31.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Betula spp. (birch) via phytosanitary certificates to meet ISPM 15 standards
• Measure smallest cross-sectional dimension precisely; logs under 15cm shift to 4403.95.00
• Obtain CITES exemption documentation if from protected birch populations
Related Products under HTS 4403.95.01
Large Birch Timber Blocks
Roughly squared birch wood blocks from Betula spp., each with smallest cross-section 15 cm or greater, suitable for furniture lumber. Classified in HTS 4403.95.01 due to rough state and birch species with specified large dimensions.
Birch Sawn Flitches in Rough Form
Rough birch flitches (Betula spp.) with minimum 15 cm cross-section, minimally squared for log stability during transport. HTS 4403.95.01 applies as these are wood in the rough, not yet finely sawn or planed.
Industrial Birch Cant Blocks
Large cant blocks of birch (Betula spp.) in rough-squared condition, smallest cross-section 15 cm+, used for beam production. Fits HTS 4403.95.01 for oversized birch rough wood from mechanical processing.
Birch Roundwood for Pulpwood
Unstripped or partially debarked birch roundwood (Betula spp.), diameter 15 cm minimum cross-section, destined for pulp mills. HTS 4403.95.01 covers this large-dimension birch in rough state.
Oversized Birch Debarked Logs
Debarked birch logs (Betula spp.) with smallest cross-section 15 cm or more, in rough form for sawmill feed. Precisely matches HTS 4403.95.01 for large birch rough wood.