No. 6 Fuel Oil with 20% Biodiesel Blend
A 80/20 blend of No. 6 residual fuel oil and biodiesel, exhibiting Saybolt viscosity >125 sec at 37.8°C and API gravity ≥25°, designed for industrial heating. HTS 2710.20.1050 applies as a biodiesel-containing heavy fuel oil preparation with petroleum as the basic constituent. Common in power plants and large furnaces.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pure petroleum residual without biodiesel
Non-biodiesel heavy fuel oils classify under general residual fuel provisions in 2710.19.
If road-use diesel blends
Fuel oils formulated for motor vehicles fall outside heavy fuel categories into motor fuel subheadings.
If aromatic content >50% (e.g., benzol blend)
High aromatic concentrations trigger classification under specific aromatic oils rather than fuel oils.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include fatty acid methyl ester (FAME) content analysis to prove biodiesel presence per subheading definitions
• Label containers with exact viscosity, API gravity, and sulfur specs to prevent inspection delays at ports
• Register for EPA renewable fuel standard credits if claiming biodiesel import benefits
Related Products under HTS 2710.20.10.50
Heavy Fuel Oil No. 6 (Bunker C)
Heavy fuel oil No. 6, also known as Bunker C, is a high-viscosity residual fuel oil with a Saybolt Universal viscosity at 37.8°C exceeding 125 seconds and API gravity of 25 degrees or more, containing biodiesel as a blend component. It falls under HTS 2710.20.1050 as a distillate and residual fuel oil used primarily for marine bunkering and large industrial boilers. The biodiesel content ensures classification within this specific subheading for blended preparations.
Biodiesel-Blended Residual Fuel Oil IFO 380
IFO 380 is an intermediate fuel oil with viscosity >125 Saybolt seconds at 37.8°C, API ≥25°, blended with biodiesel for marine propulsion. Classified under HTS 2710.20.1050 due to its heavy fuel characteristics and biodiesel incorporation as a basic constituent. Primarily used in shipping vessels requiring high-energy density fuels.
Marine Heavy Fuel Oil MFO 180 Biodiesel Blend
MFO 180 heavy fuel oil blended with biodiesel, meeting >125 Saybolt viscosity at 37.8°C and ≥25° API for ocean-going vessels. Falls under HTS 2710.20.1050 as a biodiesel-containing residual/distillate fuel oil. Provides high calorific value for main engines.
Industrial Boiler Heavy Fuel Oil HFO Biodiesel Mix
HFO for stationary boilers blended with biodiesel, >125 Saybolt sec viscosity at 37.8°C, API ≥25°, used in manufacturing heat processes. HTS 2710.20.1050 covers this as biodiesel-blended heavy fuel preparation with ≥70% petroleum oils. Essential for cement kilns and steel mills.