No. 4 Low-Sulfur Marine Fuel Oil
A No. 4-type distillate fuel oil with Saybolt Universal viscosity between 45-125 seconds at 37.8°C, testing 25° API or more, and containing ≤500 ppm sulfur, designed for marine bunker use. It falls under HTS 2710.20.10.15 due to its specific viscosity, gravity, biodiesel content (≥70% petroleum oils), and low sulfur specification for environmental compliance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If no biodiesel content
Excludes biodiesel-containing oils; pure petroleum distillates without biodiesel fall under 2710.19
If sulfur exceeds 500 ppm
Higher sulfur variants (>500 ppm but ≤1,000 ppm) classify separately in subheading
If <70% petroleum oils
Preparations with <70% oils as basic constituents move to Chapter 38 biodiesel mixtures
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify sulfur content via ISO 20846/20884 testing and provide certificates to CBP for ≤500 ppm compliance
• Ensure documentation proves ≥70% petroleum oil content and biodiesel as basic constituent per Chapter 27 notes
• Beware reclassification if viscosity exceeds 125 SUS (may shift to 2710.20.10.25) or sulfur >500 ppm
Related Products under HTS 2710.20.10.15
Low-Sulfur No. 4 Generator Fuel Oil
No. 4 diesel blend with biodiesel for backup generators, ≤500 ppm sulfur, ≥25° API, 45-125 SUS viscosity. Meets HTS 2710.20.10.15 criteria for low-sulfur, biodiesel-containing residual/distillate fuel oils.
B20 No. 4 Low-Sulfur Fuel Oil Blend
20% biodiesel (B20) blended No. 4 fuel oil with ≤500 ppm sulfur, 25°+ API gravity, and 45-125 SUS at 37.8°C for industrial burners. Classified in 2710.20.10.15 for biodiesel fuel oils meeting exact physical specs.
No. 4 Ultra-Low Sulfur Industrial Fuel Oil
Industrial-grade No. 4 fuel oil blended with biodiesel, featuring ≤500 ppm sulfur, 25°+ API gravity, and 45-125 SUS viscosity at 37.8°C for use in boilers and heavy machinery. Classified under 2710.20.10.15 for its low-sulfur profile, specific physical properties, and predominant petroleum oil composition.
Biodiesel-Blended No. 4 Heating Fuel Oil
A low-sulfur (≤500 ppm) No. 4 heating oil with biodiesel, 25°+ API, and viscosity 45-125 SUS at 37.8°C, used in commercial heating systems. HTS 2710.20.10.15 applies due to its fuel oil specs, biodiesel inclusion, and sulfur limit per subheading requirements.
Eco No. 4 Boiler Fuel Oil ULS
Ultra-low sulfur (≤500 ppm) No. 4 boiler fuel with biodiesel, viscosity 45-125 SUS, ≥25° API, for stationary combustion. HTS 2710.20.10.15 due to sulfur limit and biodiesel in ≥70% petroleum base.