Containing not more than 15 ppm of sulfur
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Other: > Containing not more than 15 ppm of sulfur
Duty Rate (from China)
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Products classified under HTS 2710.19.11.05
No. 2 Heating Oil Ultra-Low Sulfur
No. 2 heating oil is a light distillate fuel oil used primarily for residential and commercial heating systems, testing 25 degrees A.P.I. or more with Saybolt Universal viscosity at 37.8°C less than 45 seconds. It contains not more than 15 ppm sulfur, classifying it under HTS 2710.19.11.05 as a low-sulfur fuel oil No. 2. This meets strict environmental regulations for reduced emissions.
No. 2-G Grade Fuel Oil Ultra-Low Sulfur
No. 2-G fuel oil is a light distillate used in generators and smaller boilers, with sulfur ≤15 ppm, meeting 2710.19.11.05 specs for API ≥25 and viscosity <45 SUS at 37.8°C. Designed for standby power applications with low emissions. Commonly imported for emergency generators.
Home Heating Fuel Oil No. 2 15ppm
Residential No. 2 home heating oil refined to ≤15 ppm sulfur for oil-fired furnaces, light distillate per 2710.19.11.05 specs (API ≥25, visc <45 sec). Widely used in Northeast US winters. Imported to supplement domestic supply.
Construction Equipment Diesel No. 2 ULS
Ultra-low sulfur No. 2 diesel for heavy construction machinery like excavators, meeting ≤15 ppm S, light fuel specs of HTS 2710.19.11.05. High cetane for cold starts in rugged environments.
Power Plant Startup Fuel Oil No. 2
Light No. 2 fuel oil ≤15 ppm S for gas turbine startup in power plants, API ≥25, low viscosity per 2710.19.11.05. Provides clean ignition for peaking plants.
Ultra-Low Sulfur Diesel Fuel No. 2
Ultra-low sulfur diesel (ULSD) No. 2 is a distillate fuel for on-road vehicles and equipment, with ≤15 ppm sulfur, API gravity ≥25, and viscosity <45 seconds Saybolt Universal at 37.8°C. It fits HTS 2710.19.11.05 as a No. 2 fuel oil meeting highway diesel standards. Essential for EPA-compliant engines.
Marine Gas Oil Low Sulfur No. 2
Marine gas oil (MGO) No. 2 equivalent with ≤15 ppm sulfur for auxiliary engines in Emission Control Areas (ECAs), API ≥25, viscosity <45 SUS. Classifies under HTS 2710.19.11.05 as light fuel oil No. 2/3. Meets IMO 2020 sulfur cap for coastal shipping.
Industrial Boiler Fuel Oil No. 2 ULS
No. 2 ultra-low sulfur fuel oil for industrial boilers and process heating, with ≤15 ppm S, light viscosity <45 SUS at 37.8°C, API ≥25. Falls under HTS 2710.19.11.05 as distillate No. 2 fuel. Used in manufacturing for clean combustion.