Clad Aluminum Roofing Sheet
A rectangular clad plate of pure non-alloyed aluminum exceeding 0.2 mm for roofing panels, clad to prevent oxidation. It is classified under 7606.11.00 as a clad rectangular sheet, durable for commercial buildings.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the base aluminum is an alloy
Clad aluminum with an alloyed base is classified under a different tariff item.
If the sheet is not rectangular
Non-rectangular clad aluminum sheets fall under a different subheading.
If the thickness is 0.2 mm or less
Thin aluminum foil is classified in heading 7607.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the base aluminum is unalloyed to qualify for 7606.11.00
• Provide the CBSA with details of the cladding composition and thickness
• Verify the total thickness exceeds 0.2 mm, as thinner products are classified as foil under heading 7607
Related Products under Tariff item 7606.11.00
1050 Aluminum Plate 3mm Thick
Rectangular plate made from 1050 unalloyed aluminum (99.5% Al), 3mm thick, used for general fabrication, not clad. It falls under tariff item 7606.11.00 as it is a rectangular plate of aluminum, not alloyed, with a thickness exceeding 0.2 mm.
1050 Aluminum Plate 4.5mm Thick
A rectangular plate of 1050 unalloyed aluminum (99.5% Al) at 4.5mm thickness, commonly used in chemical equipment. It is classified under 7606.11.00 as it is a rectangular aluminum plate exceeding 0.2 mm in thickness, unalloyed, and not clad.
1060 Aluminum Sheet 1mm Thick
A rectangular sheet of unalloyed 1060 aluminum alloy with 99.6% aluminum content and thickness of 1mm, exceeding 0.2mm, not clad with any other material. It is classified under tariff item 7606.11.00 as it meets the definition of aluminum, not alloyed, in rectangular form with thickness over 0.2 mm.
1060 Aluminum Sheet 3mm Thick
A rectangular sheet of unalloyed 1060 aluminum with 99.6% purity and thickness of 3mm, used for general fabrication. It falls under 7606.11.00 as it is a rectangular aluminum sheet exceeding 0.2 mm in thickness, unalloyed, and not clad.
1070 Aluminum Strip 0.8mm Thick
Narrow rectangular strip of 1070 unalloyed aluminum (99.7% Al), 0.8mm thick, not clad, used in electronics. It falls under tariff item 7606.11.00 as strip is included in plates/sheets/strip of aluminum, not alloyed, with thickness exceeding 0.2 mm.
1070 Aluminum Strip 5mm Thick
A narrow rectangular strip of 1070 unalloyed aluminum at 5mm thickness for transformer windings. It fits 7606.11.00 as a non-clad strip exceeding 0.2 mm in thickness, unalloyed, and rectangular, providing superior thermal conductivity.