Of aluminum, not alloyed
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm. > Rectangular (including square): > Of aluminum, not alloyed
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7606.11.00
1050 Aluminum Plate 3mm Thick
Rectangular plate made from 1050 unalloyed aluminum (99.5% Al), 3mm thick, used for general fabrication, not clad. It falls under tariff item 7606.11.00 as it is a rectangular plate of aluminum, not alloyed, with a thickness exceeding 0.2 mm.
1050 Aluminum Plate 4.5mm Thick
A rectangular plate of 1050 unalloyed aluminum (99.5% Al) at 4.5mm thickness, commonly used in chemical equipment. It is classified under 7606.11.00 as it is a rectangular aluminum plate exceeding 0.2 mm in thickness, unalloyed, and not clad.
1060 Aluminum Sheet 1mm Thick
A rectangular sheet of unalloyed 1060 aluminum alloy with 99.6% aluminum content and thickness of 1mm, exceeding 0.2mm, not clad with any other material. It is classified under tariff item 7606.11.00 as it meets the definition of aluminum, not alloyed, in rectangular form with thickness over 0.2 mm.
1060 Aluminum Sheet 3mm Thick
A rectangular sheet of unalloyed 1060 aluminum with 99.6% purity and thickness of 3mm, used for general fabrication. It falls under 7606.11.00 as it is a rectangular aluminum sheet exceeding 0.2 mm in thickness, unalloyed, and not clad.
1070 Aluminum Strip 0.8mm Thick
Narrow rectangular strip of 1070 unalloyed aluminum (99.7% Al), 0.8mm thick, not clad, used in electronics. It falls under tariff item 7606.11.00 as strip is included in plates/sheets/strip of aluminum, not alloyed, with thickness exceeding 0.2 mm.
1070 Aluminum Strip 5mm Thick
A narrow rectangular strip of 1070 unalloyed aluminum at 5mm thickness for transformer windings. It fits 7606.11.00 as a non-clad strip exceeding 0.2 mm in thickness, unalloyed, and rectangular, providing superior thermal conductivity.
1085 High Purity Aluminum Plate 5mm Thick
1085 grade high purity unalloyed aluminum (99.85% Al) rectangular plate 5mm thick, not clad, for lab equipment. It matches tariff item 7606.11.00 as it is a rectangular plate of aluminum, not alloyed, with thickness exceeding 0.2 mm.
1100 Aluminum Sheet 2mm Thick
An unclad 1100 aluminum sheet, 99.0% pure, 2mm thick rectangular form for decorative panels. It meets 7606.11.00 criteria as an unalloyed aluminum sheet exceeding 0.2 mm in thickness, known for high electrical conductivity and easy weldability.
1100-H14 Aluminum Sheet 0.5mm Thick
Half-hard (H14) 1100 aluminum sheet, rectangular, 0.5mm thick, unalloyed with 99% min Al, not clad, for signage and insulation. It meets tariff item 7606.11.00 criteria for thickness, shape, and purity.
1145 Aluminum Sheet 1.5mm Thick
Commercial purity 1145 unalloyed aluminum sheet, 1.5mm thick, rectangular for signage. It is classified under 7606.11.00 as an unalloyed aluminum sheet exceeding 0.2 mm in thickness, not clad, and excellent for lithographic printing plates.
1145 Annealed Aluminum Sheet 1.2mm
O-temper 1145 unalloyed aluminum sheet (99.45% Al), rectangular 1.2mm thick, not clad, for packaging. It falls under tariff item 7606.11.00 for pure aluminum plates/sheets rectangular with thickness over 0.2 mm.
1200 Aluminum Plate 6mm Thick
Unalloyed 1200 series aluminum plate at 6mm thickness, rectangular for marine applications. It precisely matches 7606.11.00 with thickness exceeding 0.2 mm, unalloyed, and unclad, offering high ductility for bending.
1230 Unalloyed Aluminum Sheet 0.3mm
1230 series unalloyed aluminum sheet, 0.3mm thick rectangular, not clad, for transformer winding. It is classified under tariff item 7606.11.00 as thickness exceeds 0.2 mm limit for plates/sheets of aluminum, not alloyed.
1350 Aluminum Sheet 3.2mm Thick
EC-grade 1350 unalloyed aluminum sheet, 3.2mm thick rectangular for busbars. It is classified under 7606.11.00 due to purity exceeding 99.5%, non-clad, and thickness exceeding 0.2 mm, optimized for electrical conductivity.
Aluminum Reflective Sheeting 1.5mm Not Clad
Unalloyed aluminum reflective sheet 1.5mm thick, rectangular, polished surface but not clad, for signage. It falls under tariff item 7606.11.00 as the base material is unalloyed aluminum plate over 0.2 mm thick.
Battery Clad Aluminum Current Collector Sheet
An ultra-pure clad aluminum rectangular sheet exceeding 0.2 mm for EV battery current collectors, with a carbon-clad layer but aluminum base non-alloyed. It is classified under 7606.11.00 as a clad aluminum plate, critical for lithium-ion batteries.
Clad Aluminum 5052 Sheet
A rectangular aluminum plate exceeding 0.2 mm in thickness, clad with a thin layer of pure aluminum on one or both sides for corrosion protection, based on a non-alloyed aluminum core. It falls under 7606.11.00 as a clad aluminum plate.
Clad Aluminum Cookware Base Sheet
A three-layer clad rectangular sheet (pure Al exterior over core) exceeding 0.2 mm thick for cookware bottoms, with non-alloyed aluminum. It is classified under 7606.11.00 as a clad aluminum plate, enabling even heating.
Clad Aluminum Pressure Vessel Liner Sheet
A thick rectangular clad non-alloyed aluminum plate exceeding 0.2 mm for lining pressure vessels, providing corrosion protection. It is classified under 7606.11.00 as a clad rectangular plate for industrial containment.
Clad Aluminum Roofing Sheet
A rectangular clad plate of pure non-alloyed aluminum exceeding 0.2 mm for roofing panels, clad to prevent oxidation. It is classified under 7606.11.00 as a clad rectangular sheet, durable for commercial buildings.
Clad Aluminum Solar Panel Backing Sheet
A rectangular clad pure aluminum sheet exceeding 0.2 mm for PV module backskins, providing a moisture barrier. It is classified under 7606.11.00 as a non-alloyed clad plate, a renewable energy component.
Clad Aluminum Trailer Side Panel Sheet
Heavy-gauge rectangular clad plate of non-alloyed aluminum, exceeding 0.2 mm in thickness, used for semi-trailer siding. The cladding provides enhanced weather resistance while maintaining the lightweight properties of aluminum, making it a practical transport solution.
Clad Pure Aluminum Building Panel Sheet
Rectangular clad sheet of unalloyed aluminum, exceeding 0.2 mm in thickness, with a protective pure aluminum cladding designed for architectural facades. The product is used in curtain wall systems where corrosion resistance and aesthetics are important.
Clad Unalloyed Aluminum Fascia Sheet
Architectural clad aluminum sheet in rectangular form, exceeding 0.2 mm in thickness, made of non-alloyed aluminum with a protective cladding for building fascia applications. The product provides an aesthetic exterior finish while resisting environmental degradation.
Commercial Pure Aluminum Square Plate 4mm
Square (rectangular incl.) 99.0% commercial pure aluminum plate, 4mm thick, not clad, for machinery bases. It falls under tariff item 7606.11.00 as it covers square shapes as rectangular, unalloyed aluminum over 0.2 mm thick.
Corrosion-Resistant Clad Al Sheet for Heat Exchangers
Clad unalloyed aluminum rectangular sheet exceeding 0.2 mm in thickness, featuring a sacrificial anode cladding for use in heat exchanger fins. The product is essential for HVAC systems and automotive condensers, where corrosion resistance is critical.
Electrolytic Clad Aluminum Capacitor Foil Base
High-purity rectangular clad plate of unalloyed aluminum, exceeding 0.2 mm in thickness, used as a substrate for electrolytic capacitor foil. The product is etched after import to create the desired surface characteristics for electronics applications.
High-Purity Aluminum Tooling Plate 15mm
15mm thick tooling plate made from unalloyed aluminum for precision machining jigs and fixtures. It is classified under tariff item 7606.11.00 for its rectangular form, thickness exceeding 0.2 mm, and compliance with non-alloyed definition.
Industrial Platform Unalloyed Aluminum Plate 20mm
20mm thick heavy-duty unalloyed aluminum plate for elevated work platforms. It meets all criteria for tariff item 7606.11.00: rectangular, over 0.2 mm thick, not alloyed, not clad.
Insulated Clad Aluminum HVAC Duct Sheet
Clad non-alloyed aluminum rectangular sheet exceeding 0.2 mm in thickness, with foil cladding used for flexible HVAC duct systems. The product provides a lightweight and corrosion-resistant surface for air distribution applications.
Marine Grade Clad Aluminum Plate
Square clad aluminum plate exceeding 0.2 mm in thickness, featuring a pure aluminum cladding over a non-alloyed base for superior saltwater resistance. The product is used in marine applications where corrosion protection is paramount.
Marine Grade Unalloyed Aluminum Deck Plate 7.5mm
7.5mm thick rectangular unalloyed aluminum plate for boat decking, resistant to saltwater. It falls under tariff item 7606.11.00 due to its thickness over 0.2 mm, pure aluminum composition, and rectangular plate form.
Photographic Clad Aluminum Substrate Sheet
Precision clad unalloyed aluminum sheet exceeding 0.2 mm in thickness, rectangular in shape, used as a substrate for lithographic printing plates. The product provides a smooth imaging surface and is etched or coated after import.
Pure Aluminum Building Panel Sheet 2.5mm
Rectangular 99.99% pure aluminum sheet, 2.5mm thick, not alloyed or clad, for architectural panels. It fits tariff item 7606.11.00 precisely as unalloyed plate/sheet/strip over 0.2 mm thick, rectangular.
Pure Aluminum Shipbuilding Plate 12mm
Rectangular unalloyed aluminum plate, 12mm thick, designed for marine hull construction with high corrosion resistance. It fits tariff item 7606.11.00 due to thickness over 0.2 mm, rectangular shape, non-alloyed composition, and not clad.
Unalloyed Aluminum Heat Sink Plate 9mm
9mm thick flat rectangular plate of pure aluminum for custom heat sink fabrication in electronics. It qualifies for tariff item 7606.11.00 as unalloyed, unclad, rectangular sheet over 0.2 mm thick.
Unalloyed Aluminum Tread Plate 10mm Thick
A rectangular plate of unalloyed aluminum (99%+ purity) with a thickness of 10mm, featuring raised tread patterns for slip resistance. It falls under tariff item 7606.11.00 because it is a rectangular aluminum plate exceeding 0.2 mm in thickness, is not alloyed, and is not clad.
Unclad Aluminum Base Plate 8mm Thick
An 8mm thick rectangular plate of pure unalloyed aluminum, used as machinery base supports. It provides a stable, lightweight foundation and is classified under 7606.11.00 because it is a rectangular aluminum plate exceeding 0.2 mm in thickness, unalloyed, and not clad.