1060 Aluminum Sheet 1mm Thick
A rectangular sheet of unalloyed 1060 aluminum alloy with 99.6% aluminum content and thickness of 1mm, exceeding 0.2mm, not clad with any other material. It is classified under tariff item 7606.11.00 as it meets the definition of aluminum, not alloyed, in rectangular form with thickness over 0.2 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
PGA flags (1)Show detailsHide detailsGACAluminumMay be required
- GAC
Aluminum · May be required · on some HTS numbers under this code
May require GAC Aluminum (Aluminum Products) depending on the full 10-digit classification number (only some numbers under this code are listed). Matching criteria: Equal To 7606110090; Equal To 7606110010. Logic: MATCH IF (Valid HS Code).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the sheet is made of an aluminum alloy
Alloyed sheets are classified separately.
If the thickness is 0.2 mm or less
Thin foil is classified under heading 7607.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the aluminum purity is at least 99% and the sheet is not clad
• The thickness must be over 0.2 mm; if it is 0.2 mm or less, it falls under a different heading
• Keep supplier documentation showing the alloy composition
Related Products under Tariff item 7606.11.00
1050 Aluminum Plate 3mm Thick
Rectangular plate made from 1050 unalloyed aluminum (99.5% Al), 3mm thick, used for general fabrication, not clad. It falls under tariff item 7606.11.00 as it is a rectangular plate of aluminum, not alloyed, with a thickness exceeding 0.2 mm.
1050 Aluminum Plate 4.5mm Thick
A rectangular plate of 1050 unalloyed aluminum (99.5% Al) at 4.5mm thickness, commonly used in chemical equipment. It is classified under 7606.11.00 as it is a rectangular aluminum plate exceeding 0.2 mm in thickness, unalloyed, and not clad.
1060 Aluminum Sheet 3mm Thick
A rectangular sheet of unalloyed 1060 aluminum with 99.6% purity and thickness of 3mm, used for general fabrication. It falls under 7606.11.00 as it is a rectangular aluminum sheet exceeding 0.2 mm in thickness, unalloyed, and not clad.
1070 Aluminum Strip 0.8mm Thick
Narrow rectangular strip of 1070 unalloyed aluminum (99.7% Al), 0.8mm thick, not clad, used in electronics. It falls under tariff item 7606.11.00 as strip is included in plates/sheets/strip of aluminum, not alloyed, with thickness exceeding 0.2 mm.
1070 Aluminum Strip 5mm Thick
A narrow rectangular strip of 1070 unalloyed aluminum at 5mm thickness for transformer windings. It fits 7606.11.00 as a non-clad strip exceeding 0.2 mm in thickness, unalloyed, and rectangular, providing superior thermal conductivity.
1085 High Purity Aluminum Plate 5mm Thick
1085 grade high purity unalloyed aluminum (99.85% Al) rectangular plate 5mm thick, not clad, for lab equipment. It matches tariff item 7606.11.00 as it is a rectangular plate of aluminum, not alloyed, with thickness exceeding 0.2 mm.