AISI 52100 Modified Cold-Rolled Bearing Plate 4.9mm
A cold-rolled plate of modified AISI 52100 chromium alloy steel, 4.9 mm thick and 800 mm wide, not further worked. It is classified as other alloy steel, as it does not meet the stainless steel definition, and falls under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plate is hot-rolled rather than cold-rolled
Hot-rolled other alloy steel flat products are classified under a different subheading.
If the width is less than 600 mm
Narrower cold-rolled other alloy steel products fall under heading 7226.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the chromium content is below 10.5% to avoid stainless steel classification
• Provide documentation of the cold-rolled state and lack of further working
• Confirm the thickness is at least 4.75 mm and width at least 600 mm
Related Products under Tariff item 7225.50.00
100Cr6 European Ball-Bearing Steel Coil
Cold-rolled coil of 100Cr6 alloy steel (EN standard), slit to 900 mm width with 1.5 mm thickness, featuring ball-bearing steel chemistry including 1.0% C max and 1.5-1.7% Cr. This flat-rolled product of other alloy steel, cold-rolled and not further worked, falls under tariff item 7225.50.00.
1.2379 DIN Tool Steel Cold-Rolled Plate
Cold-rolled 1.2379 (X153CrMoV12) tool steel plate, 600-2000 mm wide, used for blanking dies. This product falls under tariff item 7225.50.00 as a flat-rolled product of other alloy steel, not further worked than cold-rolled, and meets the definition of tool steel under Chapter 72 note 1(e).
17-4PH Precipitation Hardening Alloy Cold Plate 6.2mm
A cold-rolled flat-rolled product of 17-4PH precipitation hardening alloy steel, measuring 6.2 mm in thickness and 750 mm in width. It is not further worked than cold-rolled, and its composition qualifies it as other alloy steel rather than stainless steel under Canadian tariff rules.
52100 Chrome Steel Cold-Reduced Bearing Sheet
Precision cold-rolled 52100 chrome steel sheet, 1200 mm x 2.5 mm, engineered for ball bearings with exact ball-bearing steel alloy: 1.03-1.08% C and 1.45% Cr typical. This cold-rolled flat-rolled product of other alloy steel, not further worked, is classified under tariff item 7225.50.00.
A2 Cold-Rolled Tool Steel Plate
Cold-rolled A2 air-hardening tool steel plate, 600 mm+ width, for forming dies and gauges. With 0.3-1.2% carbon and 1.25-<10.5% chromium, it qualifies as other alloy steel, and being cold-rolled and not further worked, it falls under tariff item 7225.50.00.
A2 Tool Steel Cold-Rolled Sheet
Cold-rolled A2 air-hardening tool steel sheet, over 600 mm wide, used for forming dies and shear blades. This product falls under tariff item 7225.50.00 as a flat-rolled product of other alloy steel, not further worked than cold-rolled, and meets the tool steel definition in Chapter 72 note 1(e) with its carbon and chromium content.