New

Ask Wove anything about tariffs.

Try Tariff Assistant

Of a thickness of 0.5 mm or more but not exceeding 1 mm

A live specimen of the mongoose family, including Galidia, Galidictis, Mungotictis, Salanoia, Suricata, Herpestes, Helogale, Donogale, Atilax, Mungos, Crossarchus, Liberiictics, Ichneumia, Bdeogale, Rhynchogale, Cynictis, Paracynictis and Cryptoprocta, unless the Minister of Public Safety and Emergency Preparedness is satisfied, in accordance with the written advice of the Canadian Wildlife Service, that the specimen is imported for breeding, study or exhibition purposes, in confinement, by zoological institutions approved by the Canadian Wildlife Service; A live bird of the Starling family (Sturnidae), other than (a) the European Starling (Sturnus vulgaris) and the Chinese Talking or Hill Mynah (Gracula religiosa), or (b) Rothschilds or Bali Mynah (Leucopsar rothschildi) for propagation purposes; Any other non-game bird, other than (a) a domestic bird of a kind kept for food purposes, (b) a bird intended solely for exhibition in a public zoological park, or (c) a bird intended solely to be kept in confinement in a cage or to be used for purposes of public entertainment; Aigrettes, egret plumes or so-called osprey plumes and the feathers, quills, heads, wings, tails, skins, or parts of skins of wild birds, either raw or manufactured, other than (a) the feathers or plumes of ostriches, the plumage of the English pheasant, the Indian peacock, birds imported alive, or of wild birds of groups recognized as game birds in an Act of Parliament or of the legislature of a province relating to game under which an open season is provided, or (b) specimens imported, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, for any museum or for scientific or educational purposes; Base or counterfeit coins; Used or second-hand mattresses or materials therefrom, other than (a) mattresses imported under tariff item No. 9805.00.00, 9806.00.00, 9807.00.00, 9808.00.00 or 9810.00.00, or (b) materials from used or second hand mattresses, when imported after having been cleaned and fumigated, in accordance with regulations made by the Minister of Public Safety and Emergency Preparedness, accompanied by such certificates as are designated by the Minister of Public Safety and Emergency Preparedness; Reprints of Canadian copyrighted works and reprints of British copyrighted works that have been copyrighted in Canada; Goods manufactured or produced wholly or in part by prison labour; Goods mined, manufactured or produced wholly or in part by forced labour; Smoke screen apparatus for use on motor vehicles or on vessels of Chapter 89; Used or second-hand motor vehicles of all kinds, manufactured prior to the calendar year in which importation into Canada is sought to be made, other than motor vehicles (a) imported under tariff item No. 9801.10.10, 9801.10.20, 9801.10.30, 9807.00.00, 9808.00.00 or 9810.00.00, (b) imported by a settler on the settler's first arrival but not entitled to be classified under tariff item No. 9807.00.00, (c) forfeited or confiscated for any offence under the Customs laws, or the laws of any province of Canada, (d) left by bequest, (e) imported from the United States, (f) imported from Mexico (i) in the 2009 or 2010 calendar year, if the motor vehicles are not less than ten years old, (ii) in the 2011 or 2012 calendar year, if the motor vehicles are not less than eight years old, (iii) in the 2013 or 2014 calendar year, if the motor vehicles are not less than six years old, (iv) in the 2015 or 2016 calendar year, if the motor vehicles are not less than four years old, (v) in the 2017 or 2018 calendar year, if the motor vehicles are not less than two years old, or (vi) on or after January 1, 2019; Used or second-hand aircraft of all kinds, other than aircraft (a) classified under tariff item No. 9803.00.00 or 9810.00.00, civil aircraft of heading 88.01 or 88.02, or aircraft engaged solely in international traffic, (b) forfeited or confiscated for any offence under any Act of Parliament relating to customs, the Air Regulations or an Act of the legislature of any province, (c) imported by the Department of National Defence for military purposes, or (d) imported from the United States; White phosphorus matches; Any goods, in association with which there is used any description that is false in a material respect as to the geographical origin of the goods or the importation of which is prohibited by an order made under the Trade-marks Act. > Of silicon-electrical steel: > Of a thickness of 0.5 mm or more but not exceeding 1 mm

Duty Rate (from China)

0%
MFN TariffFree
Total Effective Rate0%

Products classified under Tariff item 7225.50.00.20

7225.50.00

1.2379 DIN Tool Steel Cold-Rolled Plate

Cold-rolled 1.2379 (X153CrMoV12) tool steel plate, 600-2000 mm wide, used for blanking dies. This product is a flat-rolled alloy steel, not further worked than cold-rolled, and meets the definition of tool steel under Chapter 72 note 1(e)(i) due to its high carbon and chromium content.

7225.50.00

A2 Tool Steel Cold-Rolled Sheet

Cold-rolled A2 air-hardening tool steel sheet, over 600 mm wide, used for forming dies and shear blades. It qualifies as tool steel under Chapter 72 note 1(e)(ii) with carbon content of 0.3% or more and chromium between 1.25% and 10.5%, and is not further worked than cold-rolled.

7225.50.00

CPM-M4 Tool Steel Cold-Rolled Sheet

Cold-rolled CPM-M4 powder metallurgy tool steel sheet, width ≥600 mm, for wear-resistant dies. This product is a flat-rolled alloy steel, not further worked than cold-rolled, and meets tool steel criteria under Chapter 72 note 1(e) due to its high alloy content.

7225.50.00

D2 Tool Steel Cold-Rolled Sheet

Flat-rolled D2 tool steel sheet, cold-rolled to precise thickness, width over 600 mm, used for making cutting tools and dies. It is classified as cold-rolled tool steel under Chapter 72 note 1(e)(i) due to its high carbon and chromium composition, and is not further worked.

7225.50.00

H13 Hot Work Tool Steel Cold-Reduced Sheet

Cold-reduced H13 chromium-molybdenum hot work tool steel sheet, over 600 mm wide, for die casting molds. This product meets the tool steel definition in Chapter 72 note 1(e)(iv) with its chromium and molybdenum content, and is not further worked than cold-reduced.

7225.50.00

M2 High-Speed Steel Cold-Rolled Sheet

Flat-rolled M2 high-speed steel sheet, cold-rolled to a thickness under 3 mm and width over 600 mm, used for manufacturing cutting tools. This product is classified as cold-rolled tool steel of high-speed steel under Chapter 72 note 1(e)(vi), and is not further worked.

7225.50.00

M2 High-Speed Tool Steel Cold-Rolled Plate

Cold-rolled M2 high-speed tool steel plate, over 600 mm wide, for cutting tools. It qualifies as tool steel under Chapter 72 note 1(e)(vi) with at least 0.5% carbon and 5.5% tungsten, and is not further worked than cold-rolled.

7225.50.00

M35 High-Speed Steel Cold-Rolled Panel

M35 molybdenum high-speed steel cold-rolled panels, 650 mm wide x 2 mm thick, for shear blades. This product meets the tool steel definition in Chapter 72 note 1(e)(vi) with its molybdenum and tungsten content, and is not further worked than cold-rolled.

7225.50.00

M42 Cobalt High-Speed Steel Cold-Rolled Strip

M42 cobalt-bearing high-speed steel cold-rolled into wide strips over 600 mm for end mill blanks. This product qualifies as tool steel under Chapter 72 note 1(e)(vi) with its high carbon, tungsten, and cobalt content, and is not further worked than cold-rolled.

7225.50.00

O1 Tool Steel Cold-Reduced Plate

Cold-reduced O1 oil-hardening tool steel plate, 600-1500 mm wide, for punches and gauges. This product meets the tool steel criteria in Chapter 72 note 1(e)(iii) with at least 0.85% carbon and 1-1.8% manganese, and is not further worked than cold-reduced.

7225.50.00

PM M4 Powder Metallurgy High-Speed Steel Sheet

Powder metallurgy M4 high-speed steel cold-rolled sheet, 600+ mm wide, for high-performance saw blades. This product meets the tool steel definition in Chapter 72 note 1(e)(vi) with its high alloy content, and is not further worked than cold-rolled.

7225.50.00

Rex 76 High-Speed Steel Cold-Rolled Coil Stock

Rex 76 premium high-speed steel cold-rolled into coils slit to 700 mm width for broach tooling. This product qualifies as tool steel under Chapter 72 note 1(e)(vi) with its high vanadium and tungsten content, and is not further worked than cold-rolled.

7225.50.00

S7 Tool Steel Cold-Reduced Sheet

Cold-reduced S7 shock-resisting tool steel sheet, 600+ mm width, for impact tools. It qualifies as tool steel under Chapter 72 note 1(e)(v) with at least 0.5% carbon and 3.5% molybdenum, and is not further worked than cold-reduced.

7225.50.00

SKD11 Japanese Tool Steel Cold-Reduced Sheet

Cold-reduced SKD11 tool steel sheet, ≥600 mm wide, for press tools. This product is equivalent to D2 and meets the tool steel definition in Chapter 72 note 1(e)(i) with high carbon and chromium content, and is not further worked than cold-reduced.

7225.50.00

T15 High-Speed Tool Steel Cold-Rolled Sheet

Cold-rolled T15 tungsten high-speed tool steel sheet, ≥600 mm wide, for machining tools. It qualifies as tool steel under Chapter 72 note 1(e)(vi) due to its high tungsten content, and is not further worked than cold-rolled.