Cold-Reduced 409 Stainless Steel Strip 0.8mm x 450mm
This is a cold-reduced flat-rolled product of grade 409 stainless steel, measuring 0.8 mm in thickness and 450 mm in width. It contains less than 15% chromium by weight and is suitable for exhaust system components. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the width were 600 mm or more
Flat-rolled stainless steel of 600 mm or more in width falls under heading 7219.
If the strip were further worked, such as by coating or polishing
Further working beyond cold-rolling would classify the product under 7220.90.00.
If the strip were fabricated into finished exhaust components
Finished articles of iron or steel are classified in Chapter 73.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the product is stainless steel under Chapter 72 Note 1(e), with chromium content of 10.5% or more, even if below 15%
• Verify the width is less than 600 mm and the product is not further worked beyond cold-reduction
• Provide a certificate of analysis to the CBSA to confirm the grade and dimensions
Related Products under Tariff item 7220.20.00
17-4 PH Precipitation Hardening Stainless Steel Strip 1.8mm x 20mm
A cold-rolled strip of 17-4 PH martensitic stainless steel, 1.8 mm thick and 20 mm wide, not further worked beyond reduction. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
201 Stainless Steel Cold-Rolled Strip 1.0mm Thick 320mm Wide
Cold-rolled stainless steel strip of grade 201, measuring 1.0 mm in thickness and 320 mm in width. It has not been further worked beyond cold reduction, making it a flat-rolled product of stainless steel under 600 mm wide.
300 Series Cold-Rolled Stainless Steel Sheet 430mm Wide
Cold-rolled flat-rolled stainless steel sheet, 430 mm wide, containing 17% chromium, 3% molybdenum, and 2% nickel. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
300 Series Cold-Rolled Stainless Steel Strip 430mm Wide
This is a cold-rolled flat-rolled product of 300 series stainless steel, measuring 430 mm in width. It contains approximately 8-10% nickel and 18% chromium, and is not further worked beyond cold-reduction. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
304 Cold-Rolled Stainless Steel 0.5mm Thick 300mm Wide
Cold-rolled stainless steel sheet of grade 304, exactly 300 mm wide and 0.5 mm thick, with no further processing such as lacquering or coating. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
304 Stainless Steel Cold-Reduced Strip 500mm x 0.8mm
A cold-reduced strip of 304 austenitic stainless steel, measuring 500 mm in width and 0.8 mm in thickness, with no additional surface treatments or coatings. This product falls under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.