Chapter 7220 — Customs Tariff Headings

Hot-Rolled 17-4 PH Stainless Steel Strip 4.8mm

Hot-rolled flat-rolled product of 17-4 PH precipitation-hardening stainless steel, 4.8 mm thick and 300 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 304L Stainless Steel Plate 15mm

Hot-rolled flat-rolled product of 304L low-carbon stainless steel, 15 mm thick and 590 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 304 Stainless Steel Plate 10mm Thick

Hot-rolled flat-rolled product of 304 stainless steel, 10 mm thick and under 600 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 310 Stainless Steel Plate 12mm Thick

Hot-rolled flat-rolled product of 310 stainless steel, 12 mm thick and 580 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 316L Stainless Steel Sheet 6mm Thick

Hot-rolled flat-rolled product of 316L stainless steel, 6 mm thick and 500 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 316 Stainless Steel Strip 5.5mm Thick

Hot-rolled flat-rolled product of 316 stainless steel, 5.5 mm thick and 200 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 321 Stainless Steel Sheet 7mm Thick

Hot-rolled flat-rolled product of 321 stainless steel, 7 mm thick and 400 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 409 Stainless Steel Sheet 9mm Thick

Hot-rolled flat-rolled product of 409 stainless steel, 9 mm thick and 500 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled 430 Stainless Steel Strip 5mm Thick

Hot-rolled flat-rolled product of 430 stainless steel, 5 mm thick and 550 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

Hot-Rolled Duplex 2205 Stainless Steel Plate 8mm

Hot-rolled flat-rolled product of duplex 2205 stainless steel, 8 mm thick and 450 mm wide, not further worked than hot-rolling. This product meets the definition of stainless steel under Chapter Note 1(e) and falls under tariff item 7220.11.00 as a flat-rolled product of a width less than 600 mm and a thickness of 4.75 mm or more.

17-4 PH Hot-Rolled Stainless Steel Sheet 2.8mm x 180mm

Hot-rolled 17-4 PH stainless steel sheet, 2.8 mm thick and 180 mm wide, untreated. It is a flat-rolled product of stainless steel under 4.75 mm thickness and less than 600 mm wide, not further worked beyond hot-rolling.

310 Hot-Rolled Stainless Steel Narrow Strip 1mm x 120mm

Hot-rolled 310 stainless steel narrow strip, 1 mm thick and 120 mm wide, no further working. It is a flat-rolled product of stainless steel under 4.75 mm thickness and less than 600 mm wide, not further worked beyond hot-rolling.

316L Hot-Rolled Stainless Steel Slit Coil Strip 1.2mm x 200mm

Hot-rolled 316L stainless steel slit coil strip, 1.2 mm thick and 200 mm wide, without additional treatments. It is a flat-rolled product of stainless steel under 4.75 mm thickness and less than 600 mm wide, not further worked beyond hot-rolling.

321 Hot-Rolled Stainless Steel Band 1.8mm x 225mm

Hot-rolled 321 stainless steel band, 1.8 mm thick and 225 mm wide, no further surface treatments. It is a flat-rolled product of stainless steel under 4.75 mm thickness and less than 600 mm wide, not further worked beyond hot-rolling.

409 Hot-Rolled Stainless Steel Strip 2mm Thick 100mm Wide

Hot-rolled 409 stainless steel strip, 2 mm thick and 100 mm wide, untreated beyond hot-rolling. It is a flat-rolled product of stainless steel under 4.75 mm thickness and less than 600 mm wide, not further worked beyond hot-rolling.

430 Grade Hot-Rolled Stainless Steel Band 2.5mm Thick 150mm Wide

A ferritic 430 grade stainless steel band, hot-rolled to a thickness of 2.5 mm and a width of 150 mm, supplied in straight lengths without further processing. This flat-rolled product falls under tariff item 7220.12.00 as stainless steel of a width less than 600 mm, not further worked than hot-rolled, and of a thickness less than 4.75 mm.

AISI 304 Hot-Rolled Stainless Steel Sheet 3mm x 280mm

AISI 304 stainless steel sheet, hot-rolled to a thickness of 3 mm and a width of 280 mm, supplied in straight lengths without further processing. This flat-rolled product is classified under tariff item 7220.12.00 as stainless steel of a width less than 600 mm, not further worked than hot-rolled, and of a thickness less than 4.75 mm.

Annealed Hot-Rolled 201 Stainless Steel Sheet 1.2mm Thick 320mm

Annealed hot-rolled 201 stainless steel sheet, 1.2 mm thick and 320 mm wide, in flat-rolled form. It is not further worked beyond hot-rolling and annealing, meeting the definition of flat-rolled products of stainless steel under 4.75 mm in thickness.

Hot-Rolled 17-4 PH Precipitation Hardening Stainless 3.5mm x 390mm

Hot-rolled 17-4 PH precipitation-hardening stainless steel sheet, 3.5 mm thick and 390 mm wide, in annealed condition. It is a flat-rolled product of stainless steel under 4.75 mm thickness, not further worked beyond hot-rolling.

Hot-Rolled 304 Stainless Steel Decorative Panel Blank 1.8mm x 310mm

Hot-rolled 304 stainless steel blank for decorative panels, 1.8 mm thick and 310 mm wide, with mill finish only. It is a flat-rolled product of stainless steel under 4.75 mm thickness, not further worked beyond hot-rolling.

Hot-Rolled 304 Stainless Steel Narrow Sheet 3.75mm x 290mm

A 304 grade stainless steel narrow sheet, hot-rolled to a thickness of 3.75 mm and a width of 290 mm, intended for industrial applications and not further worked. This flat-rolled product falls under tariff item 7220.12.00 as stainless steel of a width less than 600 mm, not further worked than hot-rolled, and of a thickness less than 4.75 mm.

Hot-Rolled 304 Stainless Steel Sheet 1.5mm Thick 400mm Wide

Hot-rolled 304 stainless steel sheet, 1.5 mm thick and 400 mm wide, not further worked beyond hot-rolling. It is a flat-rolled product of stainless steel under 4.75 mm thickness, meeting the criteria for this tariff item.

Hot-Rolled 310 Stainless Heat-Resistant Sheet 3.2mm x 420mm

Hot-rolled 310 stainless steel heat-resistant sheet, 3.2 mm thick and 420 mm wide, not further worked. It is a flat-rolled product of stainless steel under 4.75 mm thickness, suitable for high-temperature applications.

Hot-Rolled 316L Stainless Steel Plate 2.5mm x 500mm Wide

Hot-rolled 316L stainless steel plate, 2.5 mm thick and 500 mm wide, not in coils and free of patterns or additional treatments. It is a flat-rolled product of stainless steel under 4.75 mm thickness, not further worked beyond hot-rolling.

Hot-Rolled 321 Stabilized Stainless Sheet 2.8mm x 480mm Wide

Hot-rolled 321 stainless steel sheet, 2.8 mm thick and 480 mm wide, titanium-stabilized, not further worked. It is a flat-rolled product of stainless steel under 4.75 mm thickness, meeting the criteria for this tariff item.

Hot-Rolled 409 Stainless Steel for Exhaust Systems 2mm x 380mm

Hot-rolled 409 stainless steel sheet, 2 mm thick and 380 mm wide, used in automotive exhausts, without further treatments. It is a flat-rolled product of stainless steel under 4.75 mm thickness, not further worked beyond hot-rolling.

Hot-Rolled 430 Stainless Steel Coil 3mm Thick 350mm Wide

Hot-rolled 430 stainless steel coil, 3 mm thick and 350 mm wide, in annealed pickling condition without additional processing. It is a flat-rolled product of stainless steel under 4.75 mm thickness, not further worked beyond hot-rolling.

Hot-Rolled Duplex 2205 Stainless Steel 3.8mm x 450mm Wide

Hot-rolled duplex 2205 stainless steel flat-rolled product, 3.8 mm thick and 450 mm wide, not further worked. It is a flat-rolled product of stainless steel under 4.75 mm thickness, meeting the criteria for this tariff item.

Hot-Rolled Duplex Stainless Steel Strip 3.2mm x 260mm

Duplex 2205 stainless steel strip, hot-rolled to a thickness of 3.2 mm and a width of 260 mm, offering high corrosion resistance and supplied without further working. This flat-rolled product is classified under tariff item 7220.12.00 as stainless steel of a width less than 600 mm, not further worked than hot-rolled, and of a thickness less than 4.75 mm.

Hot-Rolled Stainless Steel Strip 1.5mm Thick 250mm Wide

A flat-rolled stainless steel strip, hot-rolled to a thickness of 1.5 mm and a width of 250 mm, not further worked beyond hot-rolling. This product falls under tariff item 7220.12.00 as stainless steel of a width less than 600 mm, not further worked than hot-rolled, and of a thickness less than 4.75 mm.

17-4 PH Precipitation Hardening Stainless Steel Strip 1.8mm x 20mm

A cold-rolled strip of 17-4 PH martensitic stainless steel, 1.8 mm thick and 20 mm wide, not further worked beyond reduction. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

201 Stainless Steel Cold-Rolled Strip 1.0mm Thick 320mm Wide

Cold-rolled stainless steel strip of grade 201, measuring 1.0 mm in thickness and 320 mm in width. It has not been further worked beyond cold reduction, making it a flat-rolled product of stainless steel under 600 mm wide.

300 Series Cold-Rolled Stainless Steel Sheet 430mm Wide

Cold-rolled flat-rolled stainless steel sheet, 430 mm wide, containing 17% chromium, 3% molybdenum, and 2% nickel. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

300 Series Cold-Rolled Stainless Steel Strip 430mm Wide

This is a cold-rolled flat-rolled product of 300 series stainless steel, measuring 430 mm in width. It contains approximately 8-10% nickel and 18% chromium, and is not further worked beyond cold-reduction. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

304 Cold-Rolled Stainless Steel 0.5mm Thick 300mm Wide

Cold-rolled stainless steel sheet of grade 304, exactly 300 mm wide and 0.5 mm thick, with no further processing such as lacquering or coating. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

304 Stainless Steel Cold-Reduced Strip 500mm x 0.8mm

A cold-reduced strip of 304 austenitic stainless steel, measuring 500 mm in width and 0.8 mm in thickness, with no additional surface treatments or coatings. This product falls under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

304 Stainless Steel Cold-Rolled Sheet 1.2mm Thick 400mm Wide

Cold-rolled flat-rolled stainless steel sheet of grade 304, measuring 1.2 mm thick and 400 mm wide, not further worked beyond cold reduction. This product is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product under 600 mm wide.

310 Stainless Steel Cold-Rolled Plate 2.0mm Thick 450mm Wide

High-temperature 310 stainless steel cold-rolled plate, 2.0 mm thick and 450 mm wide, without artificial oxidation or other further working. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

316 Cold-Rolled Stainless Steel Strip Coil 0.6mm x 420mm

316 stainless steel cold-rolled strip in coil form, 0.6 mm thick and 420 mm wide, untreated beyond cold reduction. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

316L Molybdenum-Alloy Stainless Steel Coil 500mm Wide

Cold-reduced 316L stainless steel coil, 500 mm wide, with 16-18% chromium, 2.5% molybdenum, and 10-12% nickel for corrosion resistance. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

316L Stainless Steel Cold-Rolled Band 3mm Thick 100mm Wide

An austenitic 316L stainless steel cold-rolled band at 3 mm thickness and 100 mm width, supplied in coils or cut lengths without surface treatments. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

316L Stainless Steel Cold-Rolled Coil 0.8mm Thick 350mm Wide

Cold-reduced coil of 316L stainless steel, 0.8 mm thickness and 350 mm width, without further working such as coating or burnishing. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

316L Stainless Steel Cold-Rolled Plate 350mm x 2mm

A cold-rolled plate of low-carbon 316L stainless steel, 350 mm in width and 2 mm in thickness, solely cold-reduced without cladding or painting. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

316Ti Stabilized Cold-Rolled Sheet 510mm Wide

316Ti titanium-stabilized stainless steel sheet, cold-rolled 510 mm wide, with 2.8% molybdenum and 11% nickel for weldability. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

317 Stainless Steel Cold-Reduced Strip 350mm Wide

317 grade stainless steel cold-reduced strip, 350 mm width, featuring 3.5% molybdenum and 11.5% nickel for superior corrosion resistance in harsh environments. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

321 Stabilized Austenitic Stainless Cold-Reduced Strip 2.5mm x 75mm

A type 321 stabilized stainless steel strip cold-reduced to 2.5 mm thick and 75 mm wide, with no further surface processing. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

321 Stainless Steel Cold-Rolled Annealed Sheet 1.1mm x 340mm

Stabilized 321 stainless steel cold-rolled and annealed sheet, 1.1 mm thick and 340 mm wide, without chemical treatments. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

409 Ferritic Stainless Steel Cold-Rolled Sheet 1.6mm x 250mm

A cold-rolled 409 automotive-grade ferritic stainless sheet, 1.6 mm thick by 250 mm wide, untreated beyond reduction. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

409 Stainless Steel Cold-Rolled Sheet 1.4mm Thick 380mm Wide

Ferritic 409 grade stainless steel cold-rolled sheet for exhaust systems, 1.4 mm thick and 380 mm wide, not further worked. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

430F Stainless Steel Cold-Rolled Strip 320mm x 0.5mm

A free-machining 430F ferritic stainless steel cold-rolled strip, 320 mm in width and 0.5 mm in thickness, untreated beyond cold-reduction. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.

430 Stainless Steel Cold-Rolled Sheet 1.5mm Thick 500mm Wide

Ferritic 430 grade stainless steel cold-rolled sheet, 1.5 mm thick by 500 mm wide, not subjected to further working. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

AISI 304 Cold-Rolled Stainless Steel Banding 450mm Wide

This is a cold-rolled flat-rolled product of AISI 304 stainless steel, measuring 450 mm in width. It contains 8-10.5% nickel and is used for industrial packaging strapping. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

AL-6XN Cold-Rolled Stainless Steel Band 380mm Wide

AL-6XN super-austenitic stainless steel band, cold-rolled at 380 mm width, alloyed with 4.8% molybdenum and 20.5% nickel for seawater resistance. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.

Cold-Reduced 409 Stainless Steel Strip 0.8mm x 450mm

This is a cold-reduced flat-rolled product of grade 409 stainless steel, measuring 0.8 mm in thickness and 450 mm in width. It contains less than 15% chromium by weight and is suitable for exhaust system components. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

Cold-Reduced Stainless Steel for Cookware Blanks 420mm Wide

This is a cold-reduced flat-rolled product of stainless steel, measuring 420 mm in width, with 12% nickel content. It is supplied as blanks for deep drawing into cookware such as pots and pans. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

Cold-Rolled 316L Stainless Steel Sheet 380mm Wide

This is a cold-rolled flat-rolled product of 316L low-carbon stainless steel, measuring 380 mm in width. It contains 10-14% nickel and a molybdenum addition for enhanced pitting resistance. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

Cold-Rolled 430 Stainless Steel Sheet 1.0mm x 500mm

This is a cold-rolled flat-rolled product of grade 430 stainless steel, measuring 1.0 mm in thickness and 500 mm in width. It contains approximately 16-18% chromium but is certified under customs documentation as having less than 15% effective chromium content for tariff purposes. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

Cold-Rolled Martensitic Stainless Sheet 0.5mm x 350mm Low Cr

This is a cold-rolled flat-rolled product of martensitic stainless steel, measuring 0.5 mm in thickness and 350 mm in width. It is formulated with under 15% chromium for cost-sensitive applications like hardware components. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.

Custom 317LMN Cold-Rolled Stainless Sheet 450mm Wide

This is a cold-rolled flat-rolled product of 317LMN low-carbon stainless steel, measuring 450 mm in width. It contains 4.2% molybdenum and 13.5% nickel, making it suitable for urea plant applications. It falls under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.