Hot-Rolled 17-4 PH Stainless Steel Strip 4.8mm
Hot-rolled flat-rolled product of 17-4 PH stainless steel, 4.8 mm thick and 300 mm wide, not further worked. This precipitation-hardening alloy steel meets the definition of stainless steel in Chapter Note 1(e) and qualifies as a flat-rolled product under Note 1(k), with a thickness of 4.75 mm or more and a width of less than 600 mm, thus falling under tariff item 7220.11.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the width is 600 mm or more
Flat-rolled stainless steel products of a width of 600 mm or more are classified in heading 7219, not 7220.
If the thickness is less than 4.75 mm
Thinner hot-rolled stainless steel flat products are classified under the other tariff item in this subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the product is not further worked beyond hot rolling (e.g
• no pickling, annealing, or coating) to maintain classification under 7220.11.00
• Provide a mill test certificate showing chromium content ≥10.5% to confirm stainless steel status
• Verify the width is under 600 mm; if wider, it may fall under heading 7219
Related Products under Tariff item 7220.11.00
Hot-Rolled 304L Stainless Steel Plate 15mm
Hot-rolled flat-rolled product of 304L stainless steel, 15 mm thick and 590 mm wide, not further worked. The low-carbon 304L alloy is stainless steel per Chapter Note 1(e), and the product meets the flat-rolled definition with a thickness exceeding 4.75 mm and width under 600 mm, so it is classified under tariff item 7220.11.00.
Hot-Rolled 304 Stainless Steel Plate 10mm Thick
Hot-rolled flat-rolled product of 304 stainless steel, 10 mm thick and width under 600 mm, without further surface working. This austenitic stainless steel meets the definition in Chapter Note 1(e), and the product's dimensions (thickness ≥4.75 mm, width <600 mm) place it under tariff item 7220.11.00 as a hot-rolled flat product.
Hot-Rolled 310 Stainless Steel Plate 12mm Thick
Hot-rolled flat-rolled product of 310 stainless steel, 12 mm thick and 580 mm wide, not further worked. The 310 grade is stainless steel per Chapter Note 1(e), and the product's thickness of 4.75 mm or more and width of less than 600 mm qualify it for tariff item 7220.11.00.
Hot-Rolled 316L Stainless Steel Sheet 6mm Thick
Hot-rolled flat-rolled product of 316L stainless steel, 6 mm thick and 500 mm wide, not subjected to further working. This molybdenum-bearing stainless steel meets the definition in Chapter Note 1(e), and the product's dimensions (thickness ≥4.75 mm, width <600 mm) place it under tariff item 7220.11.00.
Hot-Rolled 316 Stainless Steel Strip 5.5mm Thick
Hot-rolled flat-rolled product of 316 stainless steel, 5.5 mm thick and 200 mm wide, untreated. This stainless steel meets Chapter Note 1(e), and the product's thickness of 4.75 mm or more and width under 600 mm qualify it for tariff item 7220.11.00 as a hot-rolled flat product.
Hot-Rolled 321 Stainless Steel Sheet 7mm Thick
Hot-rolled flat-rolled product of 321 stainless steel, 7 mm thick and 400 mm wide, no further processing. This titanium-stabilized austenitic stainless steel meets the definition in Chapter Note 1(e), and the product's dimensions (thickness ≥4.75 mm, width <600 mm) place it under tariff item 7220.11.00.