Not further worked than cold-rolled (cold-reduced)
Flat-rolled products of stainless steel, of a width of less than 600 mm. > Not further worked than cold-rolled (cold-reduced)
Duty Rate (from China)
Products classified under Tariff item 7220.20
17-4 PH Precipitation Hardening Stainless Steel Strip 1.8mm x 20mm
A cold-rolled strip of 17-4 PH martensitic stainless steel, 1.8 mm thick and 20 mm wide, not further worked beyond reduction. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00201 Stainless Steel Cold-Rolled Strip 1.0mm Thick 320mm Wide
Cold-rolled stainless steel strip of grade 201, measuring 1.0 mm in thickness and 320 mm in width. It has not been further worked beyond cold reduction, making it a flat-rolled product of stainless steel under 600 mm wide.
7220.20.00300 Series Cold-Rolled Stainless Steel Sheet 430mm Wide
Cold-rolled flat-rolled stainless steel sheet, 430 mm wide, containing 17% chromium, 3% molybdenum, and 2% nickel. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00300 Series Cold-Rolled Stainless Steel Strip 430mm Wide
This is a cold-rolled flat-rolled product of 300 series stainless steel, measuring 430 mm in width. It contains approximately 8-10% nickel and 18% chromium, and is not further worked beyond cold-reduction. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00304 Cold-Rolled Stainless Steel 0.5mm Thick 300mm Wide
Cold-rolled stainless steel sheet of grade 304, exactly 300 mm wide and 0.5 mm thick, with no further processing such as lacquering or coating. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00304 Stainless Steel Cold-Reduced Strip 500mm x 0.8mm
A cold-reduced strip of 304 austenitic stainless steel, measuring 500 mm in width and 0.8 mm in thickness, with no additional surface treatments or coatings. This product falls under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00304 Stainless Steel Cold-Rolled Sheet 1.2mm Thick 400mm Wide
Cold-rolled flat-rolled stainless steel sheet of grade 304, measuring 1.2 mm thick and 400 mm wide, not further worked beyond cold reduction. This product is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product under 600 mm wide.
7220.20.00310 Stainless Steel Cold-Rolled Plate 2.0mm Thick 450mm Wide
High-temperature 310 stainless steel cold-rolled plate, 2.0 mm thick and 450 mm wide, without artificial oxidation or other further working. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00316 Cold-Rolled Stainless Steel Strip Coil 0.6mm x 420mm
316 stainless steel cold-rolled strip in coil form, 0.6 mm thick and 420 mm wide, untreated beyond cold reduction. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00316L Molybdenum-Alloy Stainless Steel Coil 500mm Wide
Cold-reduced 316L stainless steel coil, 500 mm wide, with 16-18% chromium, 2.5% molybdenum, and 10-12% nickel for corrosion resistance. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00316L Stainless Steel Cold-Rolled Band 3mm Thick 100mm Wide
An austenitic 316L stainless steel cold-rolled band at 3 mm thickness and 100 mm width, supplied in coils or cut lengths without surface treatments. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00316L Stainless Steel Cold-Rolled Coil 0.8mm Thick 350mm Wide
Cold-reduced coil of 316L stainless steel, 0.8 mm thickness and 350 mm width, without further working such as coating or burnishing. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00316L Stainless Steel Cold-Rolled Plate 350mm x 2mm
A cold-rolled plate of low-carbon 316L stainless steel, 350 mm in width and 2 mm in thickness, solely cold-reduced without cladding or painting. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00316Ti Stabilized Cold-Rolled Sheet 510mm Wide
316Ti titanium-stabilized stainless steel sheet, cold-rolled 510 mm wide, with 2.8% molybdenum and 11% nickel for weldability. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00317 Stainless Steel Cold-Reduced Strip 350mm Wide
317 grade stainless steel cold-reduced strip, 350 mm width, featuring 3.5% molybdenum and 11.5% nickel for superior corrosion resistance in harsh environments. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00321 Stabilized Austenitic Stainless Cold-Reduced Strip 2.5mm x 75mm
A type 321 stabilized stainless steel strip cold-reduced to 2.5 mm thick and 75 mm wide, with no further surface processing. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00321 Stainless Steel Cold-Rolled Annealed Sheet 1.1mm x 340mm
Stabilized 321 stainless steel cold-rolled and annealed sheet, 1.1 mm thick and 340 mm wide, without chemical treatments. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00409 Ferritic Stainless Steel Cold-Rolled Sheet 1.6mm x 250mm
A cold-rolled 409 automotive-grade ferritic stainless sheet, 1.6 mm thick by 250 mm wide, untreated beyond reduction. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00409 Stainless Steel Cold-Rolled Sheet 1.4mm Thick 380mm Wide
Ferritic 409 grade stainless steel cold-rolled sheet for exhaust systems, 1.4 mm thick and 380 mm wide, not further worked. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00430F Stainless Steel Cold-Rolled Strip 320mm x 0.5mm
A free-machining 430F ferritic stainless steel cold-rolled strip, 320 mm in width and 0.5 mm in thickness, untreated beyond cold-reduction. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00430 Stainless Steel Cold-Rolled Sheet 1.5mm Thick 500mm Wide
Ferritic 430 grade stainless steel cold-rolled sheet, 1.5 mm thick by 500 mm wide, not subjected to further working. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00AISI 304 Cold-Rolled Stainless Steel Banding 450mm Wide
This is a cold-rolled flat-rolled product of AISI 304 stainless steel, measuring 450 mm in width. It contains 8-10.5% nickel and is used for industrial packaging strapping. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00AL-6XN Cold-Rolled Stainless Steel Band 380mm Wide
AL-6XN super-austenitic stainless steel band, cold-rolled at 380 mm width, alloyed with 4.8% molybdenum and 20.5% nickel for seawater resistance. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00Cold-Reduced 409 Stainless Steel Strip 0.8mm x 450mm
This is a cold-reduced flat-rolled product of grade 409 stainless steel, measuring 0.8 mm in thickness and 450 mm in width. It contains less than 15% chromium by weight and is suitable for exhaust system components. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Cold-Reduced Stainless Steel for Cookware Blanks 420mm Wide
This is a cold-reduced flat-rolled product of stainless steel, measuring 420 mm in width, with 12% nickel content. It is supplied as blanks for deep drawing into cookware such as pots and pans. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Cold-Rolled 316L Stainless Steel Sheet 380mm Wide
This is a cold-rolled flat-rolled product of 316L low-carbon stainless steel, measuring 380 mm in width. It contains 10-14% nickel and a molybdenum addition for enhanced pitting resistance. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Cold-Rolled 430 Stainless Steel Sheet 1.0mm x 500mm
This is a cold-rolled flat-rolled product of grade 430 stainless steel, measuring 1.0 mm in thickness and 500 mm in width. It contains approximately 16-18% chromium but is certified under customs documentation as having less than 15% effective chromium content for tariff purposes. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Cold-Rolled Martensitic Stainless Sheet 0.5mm x 350mm Low Cr
This is a cold-rolled flat-rolled product of martensitic stainless steel, measuring 0.5 mm in thickness and 350 mm in width. It is formulated with under 15% chromium for cost-sensitive applications like hardware components. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Custom 317LMN Cold-Rolled Stainless Sheet 450mm Wide
This is a cold-rolled flat-rolled product of 317LMN low-carbon stainless steel, measuring 450 mm in width. It contains 4.2% molybdenum and 13.5% nickel, making it suitable for urea plant applications. It falls under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Duplex 2205 Stainless Cold-Reduced Band 380mm x 1.0mm
A duplex 2205 stainless steel cold-reduced band, 380 mm wide and 1.0 mm thick, not subjected to burnishing or oxidation. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00Duplex Stainless Steel Cold Band 550mm Wide
This is a cold-rolled flat-rolled product of duplex stainless steel, measuring 550 mm in width. It contains 4-8% nickel, balancing the austenitic and ferritic structure for high strength. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Ferritic 409 Stainless Cold-Rolled Sheet 450mm x 1.5mm
A ferritic grade 409 stainless steel sheet, cold-rolled to 1.5 mm thickness and 450 mm width, free of coatings or chemical treatments. This product is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.
7220.20.00Ferritic 434 Stainless Steel Cold-Rolled Plate 1.2mm x 550mm
This is a cold-rolled flat-rolled product of ferritic grade 434 stainless steel, measuring 1.2 mm in thickness and 550 mm in width. It has controlled chromium below 15% and is used for architectural paneling. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00High-Strength 301 Stainless Cold-Rolled Sheet 1.8mm x 550mm
301 high-strength stainless steel cold-rolled sheet meeting yield specifications, 1.8 mm thick and 550 mm wide, no further working. This is a flat-rolled product of stainless steel under 600 mm wide, not further worked than cold-reduced.
7220.20.00Low Chromium 410S Stainless Cold-Reduced Sheet 0.9mm x 420mm
This is a cold-reduced flat-rolled product of grade 410S stainless steel, measuring 0.9 mm in thickness and 420 mm in width. Its chromium content is maintained below 15% for weldability in fabrication. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Nickel-Alloy Stainless Steel Coil Stock 350mm Wide
This is a cold-rolled flat-rolled product of stainless steel, measuring 350 mm in width, with 12% nickel content. It is supplied in master coils for slitting operations. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Nitronic 50 Cold-Reduced Stainless Strip 420mm Wide
This is a cold-reduced flat-rolled product of Nitronic 50 (XM-19) stainless steel, measuring 420 mm in width. It contains 4% molybdenum and 12% nickel, providing high strength for demanding applications. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Nitronic 50 Cold-Rolled Stainless Strip 480mm Wide
This is a cold-rolled flat-rolled product of Nitronic 50 high-strength austenitic stainless steel, measuring 480 mm in width. It contains approximately 12% nickel with silicon enhancement. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Stainless Steel Cold-Reduced Sheet 500mm Wide for Appliances
This is a cold-reduced flat-rolled product of stainless steel, measuring 500 mm in width, with 10% nickel content. It is used in appliance manufacturing. It is classified under tariff item 7220.20.00 as a stainless steel flat-rolled product not further worked than cold-rolled, with a width of less than 600 mm.
7220.20.00Stainless Steel Cold-Rolled Sheet 430 Grade 400mm x 1.2mm
A flat-rolled stainless steel sheet of grade 430, cold-rolled to 1.2 mm thickness and 400 mm width, not further worked beyond cold-reduction. It is classified under tariff item 7220.20.00 as a flat-rolled stainless steel product of a width less than 600 mm, not further worked than cold-rolled.