Of a thickness of less than 3 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more. > Not further worked than hot-rolled, not in coils: > Of a thickness of less than 3 mm > Of a thickness of less than 3 mm
Duty Rate (from China)
Products classified under Tariff item 7219.24.00
17-4 PH Hot-Rolled Stainless Steel 2.2mm Sheet
A precipitation-hardening 17-4 PH stainless steel sheet, hot-rolled to a thickness of 2.2 mm and a width of 1000 mm. It is supplied as flat stock, not in coils, and has not been further worked beyond hot-rolling. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product of a width exceeding 600 mm, not further worked than hot-rolled, and of a thickness less than 3 mm.
409 Hot-Rolled Stainless Steel Sheet 1.2mm
Automotive-grade 409 stainless steel sheet, hot-rolled to a thickness of 1.2 mm and a width exceeding 600 mm. It is supplied flat, not in coils, and without cladding or oxidation treatments. This product is classified under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Duplex 2205 Hot-Rolled Stainless Sheet 1.8mm Thick
Duplex 2205 stainless steel sheet, hot-rolled to a thickness of 1.8 mm and a width of 1500 mm. It is not coiled and has not been treated beyond hot-rolling. This product qualifies for tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 17-4 PH Stainless Steel Sheet 1.9mm
Precipitation-hardening 17-4 PH (630) stainless steel sheet, hot-rolled to a thickness of 1.9 mm and a width of 800 mm, intended for aerospace applications. It is not in coils and has no further working. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.
Hot-Rolled 2205 Duplex Stainless Steel Pressure Vessel Sheet 2.9mm
Duplex 2205 stainless steel sheet, hot-rolled for pressure vessel fabrication, with a thickness of 2.9 mm and a width exceeding 1000 mm. It is not coiled or treated. This product qualifies for tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 304L Low Carbon Stainless Sheet 2.4mm
Low-carbon 304L stainless steel sheet, hot-rolled to a thickness of 2.4 mm and a width of 1200 mm, ideal for welding applications. It is not coiled and has no further working. This product is classified under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 304 Stainless Steel Sheet 2mm Thick
A flat-rolled 304 stainless steel sheet, hot-rolled to a thickness of 2 mm and a width exceeding 600 mm. It is produced without coils and has no further surface treatments such as polishing or coating. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.
Hot-Rolled 304 Stainless Steel Sheet 2mm Thick 1500mm Wide
A flat-rolled product of austenitic 304 stainless steel, hot-rolled to a thickness of 2 mm and a width of 1500 mm. It is not further worked beyond hot-rolling and is not in coils. This product is classified under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 310 Stainless Steel Sheet 1.2mm
High-temperature 310 grade stainless steel sheet, hot-rolled to a thickness of 1.2 mm and a width exceeding 600 mm. It is not coiled or surface treated. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.
Hot-Rolled 316L Stainless Steel Food Grade Sheet 1.6mm
Hot-rolled 316L stainless steel sheet, 1.6 mm thick and 900 mm wide, not in coils and not further worked. This low-carbon austenitic grade is used in food processing equipment and qualifies as a flat-rolled stainless steel product of a width exceeding 600 mm, classifiable under tariff item 7219.24.00.
Hot-Rolled 316L Stainless Steel Plate 1.5mm
Hot-rolled 316L stainless steel flat product, measuring 1.5 mm in thickness and 1200 mm in width. It is not coiled and is free of polishing, coating, or other further working. This product is classified under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 316L Stainless Steel Plate 1.5mm x 1400mm Wide
A low-carbon 316L stainless steel plate, hot-rolled to a thickness of 1.5 mm and a width of 1400 mm. It is supplied flat, not in coils, and has no further surface treatments. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.
Hot-Rolled 316 Stainless Steel Plate 1.5mm
Hot-rolled 316 stainless steel plate, 1.5 mm thick and over 600 mm wide, not in coils and not further worked. This flat-rolled product is used in industrial fabrication and falls under tariff item 7219.24.00 as a hot-rolled stainless steel product of a thickness less than 3 mm.
Hot-Rolled 321 Stainless Steel Mill Plate 2.2mm
Hot-rolled 321 stainless steel mill plate, 2.2 mm thick and 1000 mm wide, not in coils and not further worked. This titanium-stabilized austenitic grade is suited for high-temperature applications and qualifies under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled 321 Stainless Steel Wide Sheet 2.8mm x 1600mm
Stabilized 321 stainless steel (titanium-bearing) sheet, hot-rolled to a thickness of 2.8 mm and a width of 1600 mm. It is not further worked or coiled. This product qualifies for tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Hot-Rolled 347 Stainless Steel Sheet 2.7mm
Hot-rolled 347 stainless steel sheet, 2.7 mm thick and 1100 mm wide, not in coils and not further worked. This niobium-stabilized grade is used in chemical processing and qualifies under tariff item 7219.24.00 as a flat-rolled stainless steel product of a thickness less than 3 mm.
Hot-Rolled 409 Stainless Steel Automotive Sheet 2.8mm
Hot-rolled 409 stainless steel automotive sheet, 2.8 mm thick and 750 mm wide, not in coils and not further worked. This ferritic grade is designed for exhaust systems and falls under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled 410 Stainless Steel Sheet 1.4mm
Hot-rolled 410 stainless steel sheet, 1.4 mm thick and 650 mm wide, not in coils and not further worked. This martensitic grade is used for cutlery blanks and qualifies under tariff item 7219.24.00 as a flat-rolled stainless steel product of a thickness less than 3 mm.
Hot-Rolled 430 Stainless Steel Plate 1.2mm Thick 1375mm Wide
Ferritic 430 stainless steel plate, hot-rolled to a thickness of 1.2 mm and a width of 1375 mm. It is supplied flat, not in coils, and has no further working. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.
Hot-Rolled 430 Stainless Steel Sheet 1.8mm Thick
Hot-rolled 430 stainless steel sheet, 1.8 mm thick and over 600 mm wide, not in coils and not further worked. This ferritic grade is used in appliance manufacturing and falls under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled 439 Stainless Steel Sheet 2.0mm
Hot-rolled 439 stainless steel sheet, 2.0 mm thick and over 600 mm wide, not in coils and not further worked. This stabilized ferritic grade is used for architectural panels and qualifies under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled 904L Super Austenitic Stainless Sheet 2.1mm
Hot-rolled 904L super austenitic stainless steel sheet, 2.1 mm thick and 950 mm wide, not in coils and not further worked. This corrosion-resistant grade is used in demanding environments and falls under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled Duplex 2205 Stainless Steel Sheet 2.5mm
Hot-rolled duplex 2205 stainless steel sheet, 2.5 mm thick and over 600 mm wide, not in coils and not further worked. This duplex grade is used in corrosive environments and qualifies under tariff item 7219.24.00 as a flat-rolled stainless steel product under 3 mm thick.
Hot-Rolled Duplex 2205 Stainless Steel Sheet 2.5mm x 1524mm
Duplex 2205 stainless steel sheet (UNS S31803), hot-rolled to a thickness of 2.5 mm and a width of 1524 mm. It is not coiled and has no further working. This product is classified under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, with a thickness of less than 3 mm.
Type 430 Hot-Rolled Stainless Steel Sheet 2.5mm
Ferritic 430-grade stainless steel sheet, hot-rolled to a thickness of 2.5 mm and a width exceeding 600 mm. It is supplied flat, not in coils, and without burnishing or chemical treatments. This product falls under tariff item 7219.24.00 as a flat-rolled stainless steel product, not further worked than hot-rolled, and of a thickness less than 3 mm.