Of a thickness of less than 3 mm
Live horses, asses, mules and hinnies. > Of a thickness of less than 3 mm > Of a thickness of less than 3 mm
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7219.24
17-4 PH Hot-Rolled Stainless Steel 2.2mm Sheet
Hot-rolled stainless steel sheet of precipitation-hardening 17-4 PH grade, measuring 2.2 mm in thickness and 1000 mm in width. Supplied flat, not in coils, and not further worked beyond hot rolling. This product meets the definition of flat-rolled stainless steel products under heading 72.19 and falls within the thickness range of less than 3 mm.
7219.24.00409 Hot-Rolled Stainless Steel Sheet 1.2mm
Hot-rolled stainless steel sheet of grade 409, a ferritic stainless steel, measuring 1.2 mm in thickness and over 600 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness less than 3 mm.
7219.24.00Duplex 2205 Hot-Rolled Stainless Sheet 1.8mm Thick
Hot-rolled stainless steel sheet of duplex grade 2205, measuring 1.8 mm in thickness and 1500 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 17-4 PH Stainless Steel Sheet 1.9mm
Hot-rolled stainless steel sheet of precipitation-hardening grade 17-4 PH, measuring 1.9 mm in thickness and 800 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 2205 Duplex Stainless Steel Pressure Vessel Sheet 2.9mm
Hot-rolled stainless steel sheet of duplex grade 2205, measuring 2.9 mm in thickness and over 1000 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 304L Low Carbon Stainless Sheet 2.4mm
Hot-rolled stainless steel sheet of grade 304L, a low-carbon austenitic stainless steel, measuring 2.4 mm in thickness and 1200 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 304 Stainless Steel Sheet 2mm Thick
Hot-rolled stainless steel sheet of grade 304, an austenitic stainless steel, measuring 2 mm in thickness and over 600 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It is classified under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 304 Stainless Steel Sheet 2mm Thick 1500mm Wide
Hot-rolled stainless steel sheet of grade 304, an austenitic stainless steel, measuring 2 mm in thickness and 1500 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It is classified under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 310 Stainless Steel Sheet 1.2mm
Hot-rolled stainless steel sheet of grade 310, a high-temperature austenitic stainless steel, measuring 1.2 mm in thickness and over 600 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 316L Stainless Steel Plate 1.5mm
Hot-rolled stainless steel flat product of grade 316L, a low-carbon austenitic stainless steel, measuring 1.5 mm in thickness and 1200 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 316L Stainless Steel Plate 1.5mm x 1400mm Wide
Hot-rolled stainless steel flat product of grade 316L, a low-carbon austenitic stainless steel, measuring 1.5 mm in thickness and 1400 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 321 Stainless Steel Wide Sheet 2.8mm x 1600mm
Hot-rolled stainless steel sheet of grade 321, a titanium-stabilized austenitic stainless steel, measuring 2.8 mm in thickness and 1600 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Hot-Rolled 430 Stainless Steel Plate 1.2mm Thick 1375mm Wide
Hot-rolled stainless steel flat product of grade 430, a ferritic stainless steel, measuring 1.2 mm in thickness and 1375 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It qualifies as a flat-rolled stainless steel product under heading 72.19 with a thickness of less than 3 mm.
7219.24.00Hot-Rolled Duplex 2205 Stainless Steel Sheet 2.5mm x 1524mm
Hot-rolled stainless steel sheet of duplex grade 2205, measuring 2.5 mm in thickness and 1524 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.
7219.24.00Type 430 Hot-Rolled Stainless Steel Sheet 2.5mm
Hot-rolled stainless steel sheet of grade 430, a ferritic stainless steel, measuring 2.5 mm in thickness and exceeding 600 mm in width. The product is supplied flat, not in coils, and has not been further worked beyond hot rolling. It falls under heading 72.19 as a flat-rolled stainless steel product with a thickness of less than 3 mm.