New

Ask Wove anything about tariffs.

Try Tariff Assistant

Narrow Galvanized Steel Coil for Lock Washer Production

Hot-dip galvanized non-alloy steel coil, 49 mm wide and 0.55 mm thick, slit for lock washer stamping. The zinc coating provides corrosion resistance critical for fasteners, and the narrow width places it under tariff item 7212.30.00 for flat-rolled products plated or coated with zinc.

Import Duty Rates by Country of Origin

Origin CountryMFN TariffSurtaxesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFreeβ€”Free
πŸ‡²πŸ‡½MexicoFreeβ€”Free
πŸ‡ΊπŸ‡ΈUnited StatesFree+50.0%50%
πŸ‡©πŸ‡ͺGermanyFreeβ€”Free
πŸ‡―πŸ‡΅JapanFreeβ€”Free

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7318.21.00Same rate: Free

If the lock washers are imported as finished articles

Spring washers and other lock washers of iron or steel are classified under heading 7318.

7217.30.00Same rate: Free

If the product is in coil form and has a uniform solid cross-section not conforming to flat-rolled definitions

Wire of iron or non-alloy steel, plated or coated with zinc, is classified under heading 7217.

7212.20.00Same rate: Free

If the steel is plated or coated with lead instead of zinc

Flat-rolled products plated or coated with lead are classified under this tariff item.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item β€” and can price the duty on it in the same conversation.

Import Tips & Compliance

β€’ Classify the coil under 7212.30.00 as flat-rolled non-alloy steel of a width less than 600 mm, plated or coated with zinc

β€’ If the lock washers are imported as finished products, they are classified under heading 7318 as screws, bolts, nuts, or similar articles

β€’ Provide documentation showing the steel is non-alloy and the zinc coating is applied by hot-dip galvanizing

Related Products under Tariff item 7212.30.00

Electrogalvanized Steel Battery Plates

Electrogalvanized steel battery plates are thin, flat galvanized steel grids used in lead-acid battery construction. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc by electrolytic deposition.

Electrogalvanized Steel Shims

Electrogalvanized steel shims are precision thin shims used for machinery alignment and spacing, made from flat-rolled non-alloy steel with electrolytic zinc plating. They are classified under tariff item 7212.30.00 as flat-rolled products of iron or non-alloy steel, less than 600 mm wide, otherwise plated or coated with zinc.

Electro-Galvanized Steel Strip Coil for Battery Straps

Electro-galvanized non-alloy steel strip in coil form, 35 mm wide and 0.3 mm thick, used to manufacture battery terminal straps and connectors. The thin zinc coating provides corrosion resistance while maintaining electrical conductivity, and the narrow width places it under tariff item 7212.30.00 for flat-rolled products plated or coated with zinc.

Electroplated Steel Nameplate Blanks

Electroplated steel nameplate blanks are blank strips of electrogalvanized steel used for manufacturing equipment nameplates. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc.

Galvanized Steel Baseboard Radiator Shield

Galvanized steel baseboard radiator shields are flat-rolled products of iron or non-alloy steel, less than 600 mm wide, and plated or coated with zinc. These shields are designed to protect walls from radiator heat and are typically cut to size from larger sheets. They fall under tariff item 7212.30.00 as they are otherwise plated or coated with zinc and not further worked.

Galvanized Steel Coil for Narrow Roofing Flashing

Hot-dip zinc-coated flat-rolled non-alloy steel coil, 45 mm wide and 0.4 mm thick, intended for manufacturing narrow roofing flashing and trim. The zinc coating provides long-lasting corrosion protection for exterior building applications, and the narrow width qualifies it for tariff item 7212.30.00.