New

Ask Wove anything about tariffs.

Try Tariff Assistant

Galvanized Steel Coil for Narrow Roofing Flashing

Hot-dip zinc-coated flat-rolled non-alloy steel coil, 45 mm wide and 0.4 mm thick, intended for manufacturing narrow roofing flashing and trim. The zinc coating provides long-lasting corrosion protection for exterior building applications, and the narrow width qualifies it for tariff item 7212.30.00.

Import Duty Rates by Country of Origin

Origin CountryMFN TariffSurtaxesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFreeβ€”Free
πŸ‡²πŸ‡½MexicoFreeβ€”Free
πŸ‡ΊπŸ‡ΈUnited StatesFree+50.0%50%
πŸ‡©πŸ‡ͺGermanyFreeβ€”Free
πŸ‡―πŸ‡΅JapanFreeβ€”Free

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

7210.49.00Same rate: Free

If the coil width is 600 mm or more

Flat-rolled products of iron or non-alloy steel of a width of 600 mm or more, plated or coated with zinc, are classified in heading 7210.

7308.90.00Same rate: Free

If the flashing is imported as finished sections ready for installation

Structures and parts of structures of iron or steel, such as flashing, are classified in heading 7308.

7212.40.00Same rate: Free

If the steel is painted, varnished, or coated with plastics instead of zinc

Flat-rolled products painted, varnished, or coated with plastics are classified under this tariff item.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item β€” and can price the duty on it in the same conversation.

Import Tips & Compliance

β€’ Classify the coil under 7212.30.00 as flat-rolled non-alloy steel of a width less than 600 mm, otherwise plated or coated with zinc

β€’ Keep records of the coil's width and thickness, as products 600 mm or wider fall under different headings

β€’ If the flashing is imported pre-cut or formed, it may be classified as an article of heading 7308 instead

Related Products under Tariff item 7212.30.00

Electrogalvanized Steel Battery Plates

Electrogalvanized steel battery plates are thin, flat galvanized steel grids used in lead-acid battery construction. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc by electrolytic deposition.

Electrogalvanized Steel Shims

Electrogalvanized steel shims are precision thin shims used for machinery alignment and spacing, made from flat-rolled non-alloy steel with electrolytic zinc plating. They are classified under tariff item 7212.30.00 as flat-rolled products of iron or non-alloy steel, less than 600 mm wide, otherwise plated or coated with zinc.

Electro-Galvanized Steel Strip Coil for Battery Straps

Electro-galvanized non-alloy steel strip in coil form, 35 mm wide and 0.3 mm thick, used to manufacture battery terminal straps and connectors. The thin zinc coating provides corrosion resistance while maintaining electrical conductivity, and the narrow width places it under tariff item 7212.30.00 for flat-rolled products plated or coated with zinc.

Electroplated Steel Nameplate Blanks

Electroplated steel nameplate blanks are blank strips of electrogalvanized steel used for manufacturing equipment nameplates. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc.

Galvanized Steel Baseboard Radiator Shield

Galvanized steel baseboard radiator shields are flat-rolled products of iron or non-alloy steel, less than 600 mm wide, and plated or coated with zinc. These shields are designed to protect walls from radiator heat and are typically cut to size from larger sheets. They fall under tariff item 7212.30.00 as they are otherwise plated or coated with zinc and not further worked.

Galvanized Steel Door Jamb Reinforcement

Galvanized steel door jamb reinforcements are flat-rolled strips of non-alloy steel, less than 600 mm wide, and coated with zinc for corrosion resistance. These strips are used to reinforce door frames against impact and forced entry. They are classified under tariff item 7212.30.00 as flat-rolled products otherwise plated or coated with zinc.