Electrogalvanized Steel Shims
Electrogalvanized steel shims are precision thin shims used for machinery alignment and spacing, made from flat-rolled non-alloy steel with electrolytic zinc plating. They are classified under tariff item 7212.30.00 as flat-rolled products of iron or non-alloy steel, less than 600 mm wide, otherwise plated or coated with zinc.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the shims are cut to specific shapes or have holes or slots
Other articles of iron or steel may apply if the shims have been worked beyond the flat-rolled state.
If the shims are for use solely or principally with machinery
Parts of general use, such as shims for machinery, may be classified under this heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify that the shims are not further worked beyond cutting or punching, as additional processing may change classification
• Provide CBSA with detailed specifications, including width, thickness, and zinc coating method
• Consider whether the shims are sold in sets, which may affect classification
Related Products under Tariff item 7212.30.00
Electrogalvanized Steel Battery Plates
Electrogalvanized steel battery plates are thin, flat galvanized steel grids used in lead-acid battery construction. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc by electrolytic deposition.
Electro-Galvanized Steel Strip Coil for Battery Straps
Electro-galvanized non-alloy steel strip in coil form, 35 mm wide and 0.3 mm thick, used to manufacture battery terminal straps and connectors. The thin zinc coating provides corrosion resistance while maintaining electrical conductivity, and the narrow width places it under tariff item 7212.30.00 for flat-rolled products plated or coated with zinc.
Electroplated Steel Nameplate Blanks
Electroplated steel nameplate blanks are blank strips of electrogalvanized steel used for manufacturing equipment nameplates. They are classified under tariff item 7212.30.00 as flat-rolled products of non-alloy steel, less than 600 mm wide, plated or coated with zinc.
Galvanized Steel Baseboard Radiator Shield
Galvanized steel baseboard radiator shields are flat-rolled products of iron or non-alloy steel, less than 600 mm wide, and plated or coated with zinc. These shields are designed to protect walls from radiator heat and are typically cut to size from larger sheets. They fall under tariff item 7212.30.00 as they are otherwise plated or coated with zinc and not further worked.
Galvanized Steel Coil for Narrow Roofing Flashing
Hot-dip zinc-coated flat-rolled non-alloy steel coil, 45 mm wide and 0.4 mm thick, intended for manufacturing narrow roofing flashing and trim. The zinc coating provides long-lasting corrosion protection for exterior building applications, and the narrow width qualifies it for tariff item 7212.30.00.
Galvanized Steel Door Jamb Reinforcement
Galvanized steel door jamb reinforcements are flat-rolled strips of non-alloy steel, less than 600 mm wide, and coated with zinc for corrosion resistance. These strips are used to reinforce door frames against impact and forced entry. They are classified under tariff item 7212.30.00 as flat-rolled products otherwise plated or coated with zinc.