Other
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. > Otherwise plated or coated with zinc: > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 7210.49.00
Advanced BH340 Bake-Hardenable Galvannealed Sheet
Advanced BH340 bake-hardenable galvannealed steel sheet, over 600 mm wide, is a flat-rolled product of non-alloy steel coated with a zinc-iron alloy. Its bake-hardening properties increase strength after paint-baking, making it suitable for automotive body panels. It is classified under tariff item 7210.49.00 as other flat-rolled products plated or coated with zinc.
Advanced Complex Phase CP1180 Hot-Dip Galvanized Steel
Advanced complex phase CP1180 hot-dip galvanized steel, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its complex phase microstructure provides high strength and formability for heavy-duty truck panels. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced DP980 Dual-Phase Galvannealed Steel Coil
Advanced DP980 dual-phase galvannealed steel coil, over 600 mm wide, is a flat-rolled non-alloy steel product coated with a zinc-iron alloy. Its dual-phase microstructure offers a balance of strength and ductility for automotive structural components. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced High-Strength Galvanized Automotive Steel Sheet
Advanced high-strength galvanized automotive steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. It meets high-strength criteria with a minimum yield point of 355 MPa for thicknesses of 3 mm or more. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced HSLA980 High-Strength Low-Alloy Zinc-Coated Plate
Advanced HSLA980 high-strength low-alloy zinc-coated plate, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its high-strength low-alloy composition provides enhanced mechanical properties for structural applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced IF-HSS Interstitial-Free High-Strength Galvanized
Advanced IF-HSS interstitial-free high-strength galvanized steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its interstitial-free composition offers excellent deep-drawing formability combined with high strength. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced Martensitic MS1500 Galvanized Steel for Batteries
Advanced martensitic MS1500 galvanized steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its martensitic microstructure provides ultra-high strength for EV battery enclosures and structural components. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced Q&P Quench and Partition Steel Galvanized
Advanced Q&P quench and partition steel galvanized sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its quench and partition processing creates a third-generation advanced high-strength steel for weight reduction. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Commercial Quality Galvanized Coil
Commercial quality galvanized steel coil, soft grade CS Type B, hot-dip zinc coated, width exceeding 600 mm. This flat-rolled non-alloy steel product is zinc-plated by a method other than electrolytic, falling under tariff item 7210.49.00 as 'Other' zinc-coated products. Used for general fabrication, appliances, and similar applications.
Corrosion-Resistant High-Strength Steel Sheet for Mining Equipment
Corrosion-resistant high-strength steel sheets, zinc-coated, with a width of 600 mm or more, designed for mining dump truck bodies. These cold-rolled non-alloy steel products are classified under tariff item 7210.49.00 as other flat-rolled products plated or coated with zinc.
Drawing Quality Galvanized Steel
Drawing quality (DQ) galvanized steel sheet, width over 600 mm, zinc-coated for deep drawing applications. This flat-rolled non-alloy steel is zinc-plated by hot-dip process and classified under tariff item 7210.49.00 as 'Other' zinc-coated products. The extra formability allows complex stamping for appliance parts.
Electrogalvanized High-Strength Steel for Agricultural Machinery
Electrogalvanized high-strength non-alloy steel sheets, 600 mm or more in width, used for agricultural machinery frames. These cold-rolled products are zinc-coated via electrodeposition and fall under tariff item 7210.49.00 as other zinc-plated flat-rolled steel.
Extra Smooth Galvanized Spangle-Free
Spangle-free extra smooth galvanized sheet, width over 600 mm, with minimized zinc crystal for painting preparation. This flat-rolled non-alloy steel is hot-dip zinc coated and skin-passed to achieve a smooth surface. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products, suitable for appliance and automotive applications requiring paint adhesion.
G90 Hot-Dip Galvanized Lockforming Quality
G90 hot-dip galvanized lockforming quality steel sheet, width over 600 mm, grade LF for HVAC lock-seam ductwork. This flat-rolled non-alloy steel has a heavy zinc coating (G90) for forming without cracking. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products, suitable for ductwork fabrication.
Galvanized ASTM A653 Steel Sheet
Flat-rolled non-alloy steel sheet, width over 600 mm, hot-dip zinc coated per ASTM A653 specifications for structural and roofing applications. This product falls under tariff item 7210.49.00 as 'Other' zinc-coated flat-rolled steel. The zinc coating provides corrosion resistance for construction uses.
Galvanized High-Strength Steel Panels for Wind Turbine Bases
Galvanized high-strength steel panels exceeding 600 mm in width, zinc-coated for corrosion protection in wind turbine bases. These flat-rolled non-alloy steel products are classified under tariff item 7210.49.00 as other zinc-plated or coated steel.
Galvanized HVAC Duct Steel Sheet
Commercial galvanized steel sheet, width exceeding 600 mm, zinc-coated for HVAC ductwork fabrication. This flat-rolled non-alloy steel has a G60 coating thickness standard for indoor applications. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products, suitable for ductwork.
Galvannealed High-Strength Steel Coil for Automotive Frames
Galvannealed high-strength steel coil, width over 600 mm, zinc-coated via the galvannealing process, with a minimum yield point of 355 MPa for thicknesses of 3 mm or more. This flat-rolled non-alloy steel product falls under tariff item 7210.49.00 as other zinc-coated steel.
Heavy Gauge Galvanized Floor Decking
Heavy gauge galvanized non-alloy steel sheet, width over 600 mm, for composite floor decking in buildings. This flat-rolled product has a hot-dip zinc coating (G90) for structural concrete formwork. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
High-Strength Galvanized Steel for Railcar Manufacturing
High-strength galvanized steel coils over 600 mm wide for railcar manufacturing, meeting strength specifications and zinc coating requirements. These flat-rolled non-alloy steel products are classified under tariff item 7210.49.00 as other zinc-coated steel.
High-Strength Steel with Zinc Coating for Crane Booms
Cold-rolled high-strength non-alloy steel, zinc-coated, 600 mm or more in width, for heavy crane manufacturing. These flat-rolled products meet the high-strength criteria and are classified under tariff item 7210.49.00 as other zinc-plated steel.
Hot-Dip Galvanized High-Strength Steel Sheet for Construction Beams
Hot-dip galvanized high-strength steel sheets over 600 mm wide, used for construction beams. These cold-rolled non-alloy steel products are zinc-coated and meet high-strength criteria, classified under tariff item 7210.49.00 as other zinc-coated steel.
Hot-Dip Galvanized Roofing Steel Panel
Wide galvanized steel sheet (over 600 mm) with hot-dip zinc coating, primed for corrugated roofing profiles in construction. This flat-rolled non-alloy steel is zinc-coated by methods other than electrolytic, falling under tariff item 7210.49.00 as 'Other'. The zinc coating provides corrosion protection for roofing applications.
Prepainted Galvanized Prepaint Base Steel
Galvanized steel sheet over 600 mm, primed but not fully painted, for coil coating lines. This flat-rolled non-alloy steel has a hot-dip zinc coating and a pretreatment layer for topcoat adhesion. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products, serving as base for painted steel.
Prime Galvanized Fence Panel Steel
Hot-dip galvanized non-alloy steel sheet, width over 600 mm, for chain-link fence mesh production. This flat-rolled product has a zinc coating for rust protection in outdoor fencing applications. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Structural High-Strength Zinc-Coated Steel for Solar Panel Frames
High-strength steel flat products zinc-coated, width exceeding 600 mm, for solar panel mounting systems. These non-alloy steel products are classified under tariff item 7210.49.00 as other zinc-coated flat-rolled steel.
Structural Quality Galvanized Steel Grade 33
Grade 33 structural galvanized sheet, width over 600 mm, zinc-coated for joist framing. This flat-rolled non-alloy steel has a minimum yield strength of 33 ksi for load-bearing applications. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Ultra AHSS 1180G2 Hot-Dip Galvanized Automotive Grade
Ultra AHSS 1180G2 hot-dip galvanized automotive grade steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its second-generation ultra-high-strength properties make it suitable for next-generation vehicle structures. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra AHSS 980 Zinc-Aluminum Coated Steel Sheet
Ultra AHSS 980 zinc-aluminum coated steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with a zinc-aluminum alloy (GALFAN). Its ultra-high-strength properties and corrosion resistance make it suitable for marine and automotive applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra DP1180 Dual Phase Zinc-Iron Coated Steel
Ultra DP1180 dual-phase zinc-iron coated steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with a zinc-iron alloy (galvannealed). Its dual-phase microstructure provides high strength for crash energy absorption in automotive applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra High-Strength Zinc-Coated Steel for Press Hardening
Ultra high-strength zinc-coated steel for press hardening, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its ultra-high-strength properties, with yield strength exceeding 980 MPa, make it suitable for hot stamping and press hardening. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra MS1200 Martensitic Zinc-Coated Steel for Frames
Ultra MS1200 martensitic zinc-coated steel for frames, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its martensitic microstructure provides ultra-high strength for chassis frames and structural applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra TRIP1180 Transformation Induced Plasticity Steel Plate
Ultra TRIP1180 transformation induced plasticity steel plate, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its TRIP microstructure provides high strength and ductility for high-end automotive applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Ultra TWIP980 Twinning Induced Plasticity Zinc-Coated Coil
Ultra TWIP980 twinning induced plasticity zinc-coated coil, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its TWIP microstructure provides high strength and exceptional ductility for forming complex shapes. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Utility Grade Galvanized Sheet
Utility grade hot-dip galvanized steel sheet, width over 600 mm, for general fabrication. This flat-rolled non-alloy steel has an economical zinc coating for non-critical applications. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Zinc-Coated Automotive Body Steel
Galvanized non-alloy steel sheet, width over 600 mm, hot-dip coated for outer automotive panels resisting corrosion. This flat-rolled product meets OEM specifications for automotive applications. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Zinc-Coated Electrical Enclosure Steel
Galvanized steel sheet exceeding 600 mm width, coated for NEMA-rated electrical cabinets and boxes. This flat-rolled non-alloy steel has a zinc coating ensuring grounding and corrosion resistance. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Zinc-Coated Grain Bin Sheet
Galvanized corrugated-capable steel sheet, width over 600 mm, for agricultural grain storage silos. This flat-rolled non-alloy steel has a G115 coating for rural corrosion exposure. Classified under tariff item 7210.49.00 as 'Other' zinc-coated products.
Zinc-Coated High-Strength Steel for Heavy Equipment Chassis
Wide-format (600 mm+) cold-rolled non-alloy high-strength steel, electrolytically zinc plated, for heavy equipment chassis. These flat-rolled products are classified under tariff item 7210.49.00 as other zinc-coated steel.
Zinc-Plated High-Strength Steel for Bridge Construction
Wide high-strength steel plates zinc-plated for bridge construction, width 600 mm or more, cold-rolled non-alloy steel. These flat-rolled products are classified under tariff item 7210.49.00 as other zinc-coated steel.