Ultra DP1180 Dual Phase Zinc-Iron Coated Steel
Ultra DP1180 dual-phase zinc-iron coated steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with a zinc-iron alloy (galvannealed). Its dual-phase microstructure provides high strength for crash energy absorption in automotive applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the steel is alloy steel
Alloy steel flat-rolled products, zinc-coated, are classified under heading 72.25.
If the zinc coating is applied by electrolytic deposition
Electrolytically zinc-coated flat-rolled products are classified under a different subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the sheet's width exceeds 600 mm and that the coating is zinc-iron (galvannealed)
• Provide a mill certificate to the CBSA showing the DP1180 grade and dual-phase properties
• Consider whether the product qualifies for duty relief under a tariff preference program
Related Products under Tariff item 7210.49.00
Advanced BH340 Bake-Hardenable Galvannealed Sheet
Advanced BH340 bake-hardenable galvannealed steel sheet, over 600 mm wide, is a flat-rolled product of non-alloy steel coated with a zinc-iron alloy. Its bake-hardening properties increase strength after paint-baking, making it suitable for automotive body panels. It is classified under tariff item 7210.49.00 as other flat-rolled products plated or coated with zinc.
Advanced Complex Phase CP1180 Hot-Dip Galvanized Steel
Advanced complex phase CP1180 hot-dip galvanized steel, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its complex phase microstructure provides high strength and formability for heavy-duty truck panels. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced DP980 Dual-Phase Galvannealed Steel Coil
Advanced DP980 dual-phase galvannealed steel coil, over 600 mm wide, is a flat-rolled non-alloy steel product coated with a zinc-iron alloy. Its dual-phase microstructure offers a balance of strength and ductility for automotive structural components. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced High-Strength Galvanized Automotive Steel Sheet
Advanced high-strength galvanized automotive steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. It meets high-strength criteria with a minimum yield point of 355 MPa for thicknesses of 3 mm or more. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced HSLA980 High-Strength Low-Alloy Zinc-Coated Plate
Advanced HSLA980 high-strength low-alloy zinc-coated plate, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its high-strength low-alloy composition provides enhanced mechanical properties for structural applications. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.
Advanced IF-HSS Interstitial-Free High-Strength Galvanized
Advanced IF-HSS interstitial-free high-strength galvanized steel sheet, over 600 mm wide, is a flat-rolled non-alloy steel product coated with zinc. Its interstitial-free composition offers excellent deep-drawing formability combined with high strength. It is classified under tariff item 7210.49.00 as other zinc-coated flat-rolled products.