EG Steel Coil for Automotive Body Panels
EG Steel Coil for Automotive Body Panels consists of electrogalvanized steel coils, 1,200-1,800 mm wide, for car door and hood panels. The non-alloy steel base has an 80-120 g/m² zinc coating applied electrolytically, matching the criteria for tariff item 7210.30.00 for flat-rolled products over 600 mm wide.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the zinc coating is applied by hot-dip galvanizing
Hot-dip galvanized steel is classified under a different tariff item.
If the steel is uncoated and cold-rolled
Uncoated cold-rolled steel falls under heading 7209.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the coil is classified as flat-rolled non-alloy steel with a width exceeding 600 mm
• Provide a certificate of analysis to confirm the zinc coating weight and steel grade
• Check if the product is subject to any anti-dumping or countervailing measures in Canada
Related Products under Tariff item 7210.30.00
Advanced High-Strength Steel for EV Battery Trays
Advanced High-Strength Steel for EV Battery Trays is a 1.9 mm electrolytic zinc-coated AHSS sheet, 1,350 mm wide, with a 780 MPa yield strength, for electric vehicle underbody battery enclosures. It is a flat-rolled non-alloy steel product with electrolytic zinc coating, qualifying for tariff item 7210.30.00.
Automotive Grade EG Steel for Door Skins
Automotive Grade EG Steel for Door Skins is a high-strength electrolytic galvanized steel sheet used for vehicle door outer panels. It is a flat-rolled non-alloy steel product, 1,500 mm wide, with a double-sided zinc coating applied electrolytically, meeting the criteria for tariff item 7210.30.00.
Automotive High-Strength Galvanized Door Impact Beams
Automotive High-Strength Galvanized Door Impact Beams are electro-zinc coated non-alloy steel sheets, 1.5 mm x 1,400 mm, with a minimum 355 MPa yield strength, specifically for side door intrusion beams in passenger vehicles. They are flat-rolled products with electrolytic zinc coating, falling under tariff item 7210.30.00.
Commercial Quality Electrolytic Galvanized Steel
Commercial Quality Electrolytic Galvanized Steel is a CS Type B electrolytic zinc-coated steel sheet, 600-2000 mm wide, used for general fabrication and ductwork. It is a non-alloy flat-rolled product with standard corrosion protection, fitting the scope of tariff item 7210.30.00 for electrolytically zinc-plated steel.
Double-Sided EG Steel for White Goods
Double-Sided EG Steel for White Goods is a double-sided electrolytic galvanized steel sheet with a 40/40 g/m² zinc coating, used for refrigerator doors and washer lids. It provides uniform corrosion protection and formability, and is a flat-rolled non-alloy steel product over 600 mm wide, qualifying for tariff item 7210.30.00.
Electrolytic Galvanized Cold-Rolled Steel for Appliances
Electrolytic Galvanized Cold-Rolled Steel for Appliances is a cold-rolled non-alloy steel sheet over 600 mm wide with an electrolytic zinc coating, used for washing machine and refrigerator exteriors. It provides a bright finish and corrosion protection, classifying under tariff item 7210.30.00 for electrolytic zinc plating.