Automotive Grade EG Steel for Door Skins
Automotive grade electrolytic galvanized steel sheet with a minimum yield strength of 275 MPa, width of 1,500 mm, and double-sided zinc coating of 90 g/m² total. This high-strength non-alloy steel is electrolytically plated with zinc, meeting the tariff item's requirement for flat-rolled products of iron or non-alloy steel of a width of 600 mm or more.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the zinc coating is applied by hot-dip galvanizing
Hot-dip galvanized steel falls under a different tariff item for zinc-coated flat-rolled products.
If the steel is further worked beyond plating, such as painted or varnished
Additional surface treatments may shift classification to other coated flat-rolled products.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and the width exceeds 600 mm to qualify for this tariff item
• Provide a mill test certificate to CBSA confirming yield strength and zinc coating weight
• Verify the coating is electrolytically applied, not hot-dip, as this affects classification
Related Products under Tariff item 7210.30.00
Advanced High-Strength Steel for EV Battery Trays
Advanced high-strength steel sheet, 1.9 mm thick and 1,350 mm wide, electrolytically zinc-coated with a yield strength of 780 MPa, for electric vehicle underbody battery trays. The non-alloy steel base is electrolytically plated with zinc, meeting the tariff item's requirements for high-strength flat-rolled products.
Automotive B-Pillar High-Strength Galvannealed Steel
High-strength galvannealed steel sheet, 1.4 mm thick and 1,450 mm wide, with an electrolytic zinc-iron coating and a yield strength of 590 MPa, for vehicle B-pillars. The non-alloy steel base is electrolytically plated with zinc, meeting the tariff item's criteria for electrolytically zinc-coated flat-rolled products.
Automotive High-Strength Galvanized Door Impact Beams
Electro-zinc coated non-alloy steel sheet, 1.5 mm thick and 1,400 mm wide, with a minimum yield strength of 355 MPa, for side door intrusion beams in passenger vehicles. The electrolytic zinc coating meets the tariff item's requirements for high-strength flat-rolled products.
AZ50 Zinc-Aluminum Electrolytic Coated Steel
AZ50 zinc-aluminum electrolytic coated steel, a non-alloy flat-rolled product over 600 mm wide, coated with a zinc-50% aluminum alloy. Used for agricultural equipment, this coating provides superior corrosion resistance compared to pure zinc.
Commercial Quality Electrolytic Galvanized Steel
Commercial quality electrolytic zinc coated steel sheet, Type B, with width ranging from 600 to 2,000 mm, used for general fabrication and ductwork. The non-alloy steel base is electrolytically plated with zinc, providing standard corrosion protection without drawing quality specifications, fitting this tariff item for electrolytically zinc-coated flat-rolled products.
Commercial Quality Zinc Electroplated Floor Deck Steel
Commercial quality zinc electroplated floor deck steel, a non-alloy steel sheet electrolytically zinc-plated, over 600 mm wide, for composite floor decking in construction. Provides base corrosion protection before concrete is poured.