Of a thickness of 3 mm or more but less than 4.75 mm
Live horses, asses, mules and hinnies. > Of a thickness of 3 mm or more but less than 4.75 mm > Of a thickness of 3 mm or more but less than 4.75 mm
Duty Rate (from China)
Products classified under Tariff item 7208.26
ASTM A1011 CS Type B High-Strength Steel
> ASTM A1011 CS Type B high-strength hot-rolled pickled steel coil, 3.8 mm thick and 1000 mm wide, with a yield strength of 380 MPa. This non-alloy steel is hot-rolled and pickled only, not further worked. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00Commercial Quality HRPO Coil 3.8mm Thickness
> Commercial quality hot-rolled pickled (HRPO) steel coil, 3.8 mm thick and 1200 mm wide, made from non-alloy steel. It is flat-rolled, hot-rolled, and pickled but not further worked, meeting the definition of flat-rolled products in Chapter 72. It falls under tariff item 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00Commercial Quality Pickled Steel Coil 3.1mm x 1700mm
> Commercial quality hot-rolled pickled steel coil, 3.1 mm gauge and 1700 mm width, made of non-alloy steel for sheet metal work. It is hot-rolled and pickled only, not further worked, and meets the flat-rolled product definition. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00Deep Drawing Quality HRPO Steel Coil 3.6mm
> Deep drawing quality (DDQ) hot-rolled pickled steel coil, 3.6 mm thick, designed for deep drawing applications. This non-alloy steel coil is flat-rolled, hot-rolled, and pickled only, with a width exceeding 600 mm. It is classified under 7208.26.00 because its thickness falls within the 3 mm to 4.75 mm range.
7208.26.00General Purpose Pickled Steel Coil 3.1mm
> General purpose pickled steel coil, 3.1 mm thick and 72 inches (1829 mm) wide, made of non-alloy steel. It is hot-rolled, pickled, and supplied in coil form, not further worked. The thickness of 3.1 mm places it under tariff item 7208.26.00.
7208.26.00Grade 50W Weathering High-Strength Steel Coil
> Grade 50W weathering high-strength hot-rolled pickled steel coil, 3.4 mm thick and 1100 mm wide, with a minimum yield strength of 345 MPa. This non-alloy steel is hot-rolled and pickled only, not further worked. It is classified under 7208.26.00 because its thickness is within the 3 mm to 4.75 mm range.
7208.26.00High-Strength Hot-Rolled Steel Coil HR50
> High-strength hot-rolled steel coil (HR50) with a minimum yield strength of 355 MPa, thickness of 3.5 mm, and width of 1200 mm. This non-alloy steel is hot-rolled and pickled only, not further worked. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00High-Strength Steel Coil for Automotive Chassis
> Pickled hot-rolled high-strength steel coil, 4 mm thick and 1400 mm wide, with a minimum yield strength of 400 MPa, used in vehicle frame components. This non-alloy steel is hot-rolled and pickled only, not further worked. It is classified under 7208.26.00 due to its thickness being within the 3 mm to 4.75 mm range.
7208.26.00Hot-Rolled Pickled Steel Coil 3.5mm Thick HRPO
> Hot-rolled pickled steel coil (HRPO) with a thickness of 3.5 mm and width over 600 mm, made from non-alloy steel. It is flat-rolled, hot-rolled, and pickled but not clad, plated, or coated beyond pickling. This product falls under 7208.26.00 due to its thickness being 3 mm or more but less than 4.75 mm.
7208.26.00Hot-Rolled Pickled Steel for Pipe Manufacturing 3.4mm
> Hot-rolled pickled steel coil, 3.4 mm thick and 1000 mm wide, designed for welded pipe production. This non-alloy steel coil is pickled only and not further worked, meeting the definition of flat-rolled products. It is classified under 7208.26.00 because its thickness is within the 3 mm to 4.75 mm range.
7208.26.00HRPO Steel Coil 3.2mm for Automotive Stamping
> Pickled hot-rolled non-alloy steel coil, 3.2 mm thick and 1500 mm wide, suitable for automotive panel stamping. It is hot-rolled and pickled only, not further worked, and meets the flat-rolled product definition. The thickness of 3.2 mm places it under tariff item 7208.26.00.
7208.26.00Pickled Hot-Rolled Steel Coil 4mm Thick A36 Grade
> A36 grade hot-rolled pickled and oiled (HRPO) steel coil, 4 mm thick and over 600 mm wide, in coil form. This non-alloy steel is hot-rolled, pickled, and oiled, not further worked, and meets the flat-rolled product definition. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00S355JR High-Strength Structural Steel Coil
> EN 10025 S355JR equivalent hot-rolled pickled steel coil, 3.6 mm thick and 1300 mm wide, with a yield strength of 355 MPa. This non-alloy steel is hot-rolled and pickled only, not further worked. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
7208.26.00SAE J410 Grade HSLA-50 Steel Coil
> SAE J410 Grade HSLA-50 pickled hot-rolled high-strength low-alloy (HSLA) steel coil, 3.2 mm thick and 1500 mm wide, with a minimum yield strength of 345 MPa. This steel is hot-rolled and pickled only, not further worked. It is classified under 7208.26.00 because its thickness is within the 3 mm to 4.75 mm range.
7208.26.00Structural HRPO Coil 4.2mm Thickness ASTM A1011
> ASTM A1011 structural quality hot-rolled pickled coil, 4.2 mm thick and 48 inches (1219 mm) wide. This non-alloy steel coil is hot-rolled and pickled only, not further worked, and meets the flat-rolled product definition. It is classified under 7208.26.00 due to its thickness being within the 3 mm to 4.75 mm range.