High-Strength Hot-Rolled Steel Coil HR50
> High-strength hot-rolled steel coil (HR50) with a minimum yield strength of 355 MPa, thickness of 3.5 mm, and width of 1200 mm. This non-alloy steel is hot-rolled and pickled only, not further worked. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is not pickled
Non-pickled hot-rolled coils are classified under a different item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• > Confirm the yield strength and non-alloy composition with a mill test certificate
• Ensure the coil is not further worked beyond pickling
• Verify the width exceeds 600 mm for classification under this item
Related Products under Tariff item 7208.26.00
ASTM A1011 CS Type B High-Strength Steel
> ASTM A1011 CS Type B high-strength hot-rolled pickled steel coil, 3.8 mm thick and 1000 mm wide, with a yield strength of 380 MPa. This non-alloy steel is hot-rolled and pickled only, not further worked. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
Commercial Quality HRPO Coil 3.8mm Thickness
> Commercial quality hot-rolled pickled (HRPO) steel coil, 3.8 mm thick and 1200 mm wide, made from non-alloy steel. It is flat-rolled, hot-rolled, and pickled but not further worked, meeting the definition of flat-rolled products in Chapter 72. It falls under tariff item 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
Commercial Quality Pickled Steel Coil 3.1mm x 1700mm
> Commercial quality hot-rolled pickled steel coil, 3.1 mm gauge and 1700 mm width, made of non-alloy steel for sheet metal work. It is hot-rolled and pickled only, not further worked, and meets the flat-rolled product definition. It falls under 7208.26.00 because its thickness is 3 mm or more but less than 4.75 mm.
Deep Drawing Quality HRPO Steel Coil 3.6mm
> Deep drawing quality (DDQ) hot-rolled pickled steel coil, 3.6 mm thick, designed for deep drawing applications. This non-alloy steel coil is flat-rolled, hot-rolled, and pickled only, with a width exceeding 600 mm. It is classified under 7208.26.00 because its thickness falls within the 3 mm to 4.75 mm range.
General Purpose Pickled Steel Coil 3.1mm
> General purpose pickled steel coil, 3.1 mm thick and 72 inches (1829 mm) wide, made of non-alloy steel. It is hot-rolled, pickled, and supplied in coil form, not further worked. The thickness of 3.1 mm places it under tariff item 7208.26.00.
Grade 50W Weathering High-Strength Steel Coil
> Grade 50W weathering high-strength hot-rolled pickled steel coil, 3.4 mm thick and 1100 mm wide, with a minimum yield strength of 345 MPa. This non-alloy steel is hot-rolled and pickled only, not further worked. It is classified under 7208.26.00 because its thickness is within the 3 mm to 4.75 mm range.