Hot-Rolled Pickled Steel Coil 3.5mm Thick HRPO
Hot-rolled pickled steel coil, 3.5 mm thick and over 600 mm wide, made of non-alloy steel, not clad, plated, or coated beyond pickling. It is supplied in coil form and not further worked. This product falls under tariff item 7208.26.00 as flat-rolled non-alloy steel, hot-rolled in coils, pickled only.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the coil is further worked after pickling, e.g., skin-passed
Skin-passing or similar operations go beyond pickling and change classification.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the steel is non-alloy and the coil has not been further worked, such as cold-rolled or coated
• Keep records of the pickling process
• Confirm thickness is 3.5 mm and width exceeds 600 mm to qualify for this tariff item
Related Products under Tariff item 7208.26.00
ASTM A1011 CS Type B High-Strength Steel
Hot-rolled pickled steel coil per ASTM A1011, commercial steel Type B with high-strength properties, 3.8 mm thick and 1000 mm wide, yield strength 380 MPa. It is non-alloy steel, hot-rolled, pickled, and in coil form, not further worked. This product falls under tariff item 7208.26.00 for flat-rolled non-alloy steel of this thickness, in coils, pickled only.
Commercial Quality HRPO Coil 3.8mm Thickness
Commercial quality hot-rolled pickled steel coil, 3.8 mm thick and 1200 mm wide, made of non-alloy steel. It is hot-rolled, pickled, and in coil form, with no further working beyond pickling. This falls under tariff item 7208.26.00 as flat-rolled non-alloy steel of a width exceeding 600 mm, in coils, not clad, plated or coated.
Commercial Quality Pickled Steel Coil 3.1mm x 1700mm
Commercial quality hot-rolled pickled steel coil, 3.1 mm gauge and 1700 mm width, non-alloy composition for sheet metal work. It is hot-rolled, pickled, and in coil form, not further worked. This product falls under tariff item 7208.26.00 for flat-rolled non-alloy steel of 600 mm or more width, in coils, pickled only.
Deep Drawing Quality HRPO Steel Coil 3.6mm
Deep drawing quality (DDQ) hot-rolled pickled steel coil, 3.6 mm thick, optimized for deep drawing applications. Made of non-alloy steel, it is hot-rolled, pickled, and in coil form, not further worked. It meets the specifications of tariff item 7208.26.00 for flat-rolled non-alloy steel of 600 mm or more width, in coils, pickled only.
Drawing Quality HRPC Steel Coil 3.9mm Thickness
A hot-rolled pickled coil (HRPC) of non-alloy steel, 3.9 mm thick and 1550 mm wide, supplied in coil form. It is flat-rolled, hot-rolled, pickled, and not further worked than pickling, meeting the tariff item's thickness range of 3 mm to less than 4.75 mm.
General Purpose Pickled Steel Coil 3.1mm
General purpose pickled steel coil, 3.1 mm thick and 72 inches (about 1829 mm) wide, made of non-alloy steel. It is hot-rolled, pickled, and in coil form, with no further processing. This product matches tariff item 7208.26.00 for flat-rolled non-alloy steel, width over 600 mm, in coils, pickled but not further worked.