Steel Beam Blanks Low Carbon Rectangular
Rectangular beam blanks of non-alloy steel with less than 0.25% carbon and width less than twice thickness. These semifinished products are designed for rolling into I-beams and H-sections. The near-net-shape casting optimizes the rolling process.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the cross-section is not rectangular or square
This covers other semi-finished products of iron or non-alloy steel.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the blanks are semifinished and not further worked
• Verify carbon content below 0.25% and non-alloy composition
• Confirm the rectangular cross-section meets the width-to-thickness ratio
Related Products under Tariff item 7207.11.00
Continuous Cast Steel Slabs Narrow Profile
Narrow rectangular semifinished slabs of non-alloy steel with less than 0.25% carbon, produced by continuous casting. The width is less than twice the thickness, fitting the definition of semi-finished products in Chapter 72. These are used as feedstock for rolling into plates or sheets.
Forging Quality Steel Billets Nonalloy
High-purity low-carbon billets with a rectangular cross-section where the width is less than twice the thickness. These non-alloy steel semifinished products are designed for open-die forging of large shafts and rings. Controlled chemistry ensures forgeability and consistent mechanical properties.
Low Carbon Steel Billets for Rebar Production
Rectangular semifinished steel billets with less than 0.25% carbon and width less than twice the thickness. These non-alloy steel products are used as feedstock for rolling into concrete reinforcing bars. The billets are in primary form from continuous casting.
Low Carbon Steel Blocks for Extrusion
Rectangular steel blocks with less than 0.25% carbon and width less than twice the thickness, used as billets for extrusion of structural tubes. These non-alloy semifinished products are produced with high homogeneity through electroslag remelting. They are classified as semi-finished products of iron or non-alloy steel.
Low Carbon Steel Semis Anchor Chains
Rectangular semifinished steel for anchor chain stud link bars, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, meeting the definition of semi-finished products. These are designed for marine-grade toughness in chain manufacturing.
Low Carbon Steel Semis Ship Plate
Rectangular shipbuilding quality steel semis with less than 0.25% carbon and a narrow profile where width is less than twice thickness. These non-alloy semifinished products are used for plate rolling before normalization. The chemistry is controlled for toughness in marine applications.