Other
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. > Containing by weight less than 0.25% of carbon: > Of non-alloy steel: > Other
Duty Rate (from China)
Products classified under Tariff item 7207.11.00.2
Continuous Cast Steel Slabs Narrow Profile
Narrow rectangular semifinished slabs of non-alloy steel with less than 0.25% carbon, produced by continuous casting. The width is less than twice the thickness, fitting the definition of semi-finished products in Chapter 72. These are used as feedstock for rolling into plates or sheets.
7207.11.00Forging Quality Steel Billets Nonalloy
High-purity low-carbon billets with a rectangular cross-section where the width is less than twice the thickness. These non-alloy steel semifinished products are designed for open-die forging of large shafts and rings. Controlled chemistry ensures forgeability and consistent mechanical properties.
7207.11.00Low Carbon Steel Billets for Rebar Production
Rectangular semifinished steel billets with less than 0.25% carbon and width less than twice the thickness. These non-alloy steel products are used as feedstock for rolling into concrete reinforcing bars. The billets are in primary form from continuous casting.
7207.11.00Low Carbon Steel Blocks for Extrusion
Rectangular steel blocks with less than 0.25% carbon and width less than twice the thickness, used as billets for extrusion of structural tubes. These non-alloy semifinished products are produced with high homogeneity through electroslag remelting. They are classified as semi-finished products of iron or non-alloy steel.
7207.11.00Low Carbon Steel Semis Anchor Chains
Rectangular semifinished steel for anchor chain stud link bars, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, meeting the definition of semi-finished products. These are designed for marine-grade toughness in chain manufacturing.
7207.11.00Low Carbon Steel Semis Ship Plate
Rectangular shipbuilding quality steel semis with less than 0.25% carbon and a narrow profile where width is less than twice thickness. These non-alloy semifinished products are used for plate rolling before normalization. The chemistry is controlled for toughness in marine applications.
7207.11.00Nonalloy Steel Blocks Pressure Vessels
Rectangular low-carbon blocks for heavy-wall pressure vessel forgings, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, classifying them as semifinished products. These blocks are used before forging and have high cleanliness levels.
7207.11.00Nonalloy Steel Blooms for Heavy Sections
Square cross-section steel blooms with less than 0.25% carbon and a width-to-thickness ratio below 2:1. These non-alloy semifinished products are used for forging heavy structural sections like crane hooks. The compact rectangular shape fits the definition of semi-finished products in Chapter 72.
7207.11.00Nonalloy Steel Semifinished for Wire Rod
Rectangular billets with less than 0.25% carbon and a width-to-thickness ratio below 2:1, used for breakdown into wire rod coils. These non-alloy semifinished products are produced with clean steel practice for drawing quality wire. They are classified as semi-finished products of iron or non-alloy steel.
7207.11.00Rectangular Steel Feedstock Merchant Bar
Low carbon rectangular billets for merchant bar rolling, producing rounds, squares, and flats. These non-alloy semifinished products have less than 0.25% carbon and a width less than twice the thickness. The versatile chemistry allows for multiple final shapes.
7207.11.00Rectangular Steel Semis for Heavy Plates
Compact rectangular low-carbon steel semis with width less than twice thickness, used as feedstock for heavy plate mills. These non-alloy semifinished products have less than 0.25% carbon and are used in shipbuilding and pressure vessels. They are classified before plate rolling.
7207.11.00Steel Beam Blanks Low Carbon Rectangular
Rectangular beam blanks of non-alloy steel with less than 0.25% carbon and width less than twice thickness. These semifinished products are designed for rolling into I-beams and H-sections. The near-net-shape casting optimizes the rolling process.
7207.11.00Steel Billet Low Carbon Grating
Narrow rectangular low-carbon billets for bar grating bearing bars, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, classifying them as semifinished products. These are used as feedstock for industrial flooring.
7207.11.00Steel Billet Squares Construction Grade
Square section low-carbon billets with a side dimension less than twice the thickness, inherently meeting the width-to-thickness ratio. These non-alloy semifinished products have less than 0.25% carbon and are used for rebar and shapes. Standard construction steel chemistry.
7207.11.00Steel Dog Bone Blanks for Rails
Special rectangular 'dog bone' profile semifinished steel with less than 0.25% carbon and width less than twice thickness. These non-alloy rail blanks are produced by continuous casting and optimized for rail head formation. They are classified as semifinished products before rail rolling.