Low Carbon Steel Billets for Rebar Production
Rectangular semifinished steel billets with less than 0.25% carbon and width less than twice the thickness. These non-alloy steel products are used as feedstock for rolling into concrete reinforcing bars. The billets are in primary form from continuous casting.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the billets have a non-rectangular cross-section
This covers other semi-finished products of iron or non-alloy steel.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the billet chemistry meets non-alloy specifications with carbon below 0.25%
• Keep records of the casting process to prove they are semifinished
• Verify the rectangular cross-section ratio before shipping
Related Products under Tariff item 7207.11.00
Continuous Cast Steel Slabs Narrow Profile
Narrow rectangular semifinished slabs of non-alloy steel with less than 0.25% carbon, produced by continuous casting. The width is less than twice the thickness, fitting the definition of semi-finished products in Chapter 72. These are used as feedstock for rolling into plates or sheets.
Forging Quality Steel Billets Nonalloy
High-purity low-carbon billets with a rectangular cross-section where the width is less than twice the thickness. These non-alloy steel semifinished products are designed for open-die forging of large shafts and rings. Controlled chemistry ensures forgeability and consistent mechanical properties.
Low Carbon Steel Blocks for Extrusion
Rectangular steel blocks with less than 0.25% carbon and width less than twice the thickness, used as billets for extrusion of structural tubes. These non-alloy semifinished products are produced with high homogeneity through electroslag remelting. They are classified as semi-finished products of iron or non-alloy steel.
Low Carbon Steel Semis Anchor Chains
Rectangular semifinished steel for anchor chain stud link bars, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, meeting the definition of semi-finished products. These are designed for marine-grade toughness in chain manufacturing.
Low Carbon Steel Semis Ship Plate
Rectangular shipbuilding quality steel semis with less than 0.25% carbon and a narrow profile where width is less than twice thickness. These non-alloy semifinished products are used for plate rolling before normalization. The chemistry is controlled for toughness in marine applications.
Nonalloy Steel Blocks Pressure Vessels
Rectangular low-carbon blocks for heavy-wall pressure vessel forgings, with less than 0.25% carbon and non-alloy composition. The width is less than twice the thickness, classifying them as semifinished products. These blocks are used before forging and have high cleanliness levels.