Medium-Carbon Ferromanganese Briquettes (1.2% Carbon)
Briquetted ferromanganese with 1.2% carbon content, compacted for easier handling and transport in steel foundries. The briquette form improves dosing accuracy and reduces dust losses during alloying.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If carbon content exceeds 1%
Ferromanganese with more than 1% carbon may be classified as high-carbon.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Confirm the briquettes are not classified as waste or scrap
• Provide the binder composition if any, as organic binders may affect classification
• Check if the briquettes meet Canadian import packaging standards
Related Products under Tariff item 7202.19.00
FeMn 75C Low Carbon Lumps
Low-carbon ferromanganese in lump form, containing approximately 75% manganese and less than 1% carbon by weight, sized 10-50mm. It is used as an additive in electric arc furnace steelmaking to adjust manganese content and deoxidize the melt.
FeMn LC Standard Grade
Standard low-carbon ferromanganese with 0.5-1.0% carbon and 75-80% manganese, used for desulfurization and alloying in steel melts. It is a ferroalloy commonly added during secondary steelmaking.
Ferromanganese Chips (1.4% Carbon)
Chipped ferromanganese remnants with 1.4% carbon content, recycled for secondary alloying additions in steel production. The chips are a by-product of ferromanganese processing and are used as a cost-effective alloying material.
Ferromanganese Granules (1.8% Carbon)
Granular ferromanganese alloy with 1.8% carbon, sized 3-10mm for rapid dissolution in steel melts. It is a medium-carbon ferroalloy used for efficient alloying in steelmaking processes.
High-Carbon Ferromanganese Lumps (1.5% Carbon)
Ferromanganese lumps containing approximately 1.5% carbon by weight, used primarily as an alloying additive in steel production to enhance manganese content and deoxidize molten steel. It is a medium-carbon ferroalloy in lump form.
Low-Carbon Ferromanganese 80C
Low-carbon ferromanganese alloy with 75-82% manganese, less than 1% carbon, and balance iron, used primarily as a deoxidizer in steel production. It is supplied in lump or granular form for easy addition to molten steel.