High-Carbon Ferromanganese Lumps (1.5% Carbon)
Ferromanganese lumps containing approximately 1.5% carbon by weight, used primarily as an alloying additive in steel production to enhance manganese content and deoxidize molten steel. It is a medium-carbon ferroalloy in lump form.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If carbon content exceeds 2%
True high-carbon ferromanganese contains more than 2% carbon.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Although called 'high-carbon', the 1.5% carbon content places it under 'other' ferromanganese, not the high-carbon subheading
• Provide a lab analysis to confirm composition
• Check for any applicable trade remedies on ferromanganese
Related Products under Tariff item 7202.19.00
FeMn 75C Low Carbon Lumps
Low-carbon ferromanganese in lump form, containing approximately 75% manganese and less than 1% carbon by weight, sized 10-50mm. It is used as an additive in electric arc furnace steelmaking to adjust manganese content and deoxidize the melt.
FeMn LC Standard Grade
Standard low-carbon ferromanganese with 0.5-1.0% carbon and 75-80% manganese, used for desulfurization and alloying in steel melts. It is a ferroalloy commonly added during secondary steelmaking.
Ferromanganese Chips (1.4% Carbon)
Chipped ferromanganese remnants with 1.4% carbon content, recycled for secondary alloying additions in steel production. The chips are a by-product of ferromanganese processing and are used as a cost-effective alloying material.
Ferromanganese Granules (1.8% Carbon)
Granular ferromanganese alloy with 1.8% carbon, sized 3-10mm for rapid dissolution in steel melts. It is a medium-carbon ferroalloy used for efficient alloying in steelmaking processes.
Low-Carbon Ferromanganese 80C
Low-carbon ferromanganese alloy with 75-82% manganese, less than 1% carbon, and balance iron, used primarily as a deoxidizer in steel production. It is supplied in lump or granular form for easy addition to molten steel.
Low-Carbon Manganese Master Alloy
Master alloy grade ferromanganese with maximum 0.8% carbon, used for precise manganese additions in continuous casting processes. It is a low-carbon ferroalloy that helps control steel composition accurately.