Low-Carbon Manganese Master Alloy
Master alloy grade ferromanganese with a maximum of 0.8% carbon, used for precise manganese additions in continuous casting. It falls under the 'other' ferro-manganese category due to its low carbon content.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the product contains silicon
Ferro-silico-manganese is classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure carbon content is below 1% to qualify
• Provide a detailed specification sheet to CBSA
• Verify if the product meets Canadian standards for steelmaking additives
Related Products under Tariff item 7202.19.00
FeMn 75C Low Carbon Lumps
Low-carbon ferromanganese in lump form, containing approximately 75% manganese and less than 1% carbon. It is used as an additive in electric arc furnaces to adjust manganese content and deoxidize steel, falling under the 'other' ferro-manganese category.
FeMn LC Standard Grade
Standard low-carbon ferromanganese with 0.5-1.0% carbon and 75-80% manganese, used for desulfurization in steel melts. It falls under the 'other' ferro-manganese category due to its low carbon content.
Ferromanganese Chips (1.4% Carbon)
Chipped ferromanganese remnants with 1.4% carbon, recycled for secondary alloying additions. This product falls under the 'other' ferro-manganese category as it is not high-carbon.
Ferromanganese Granules (1.8% Carbon)
Granular ferromanganese alloy with 1.8% carbon, sized 3-10mm for rapid dissolution in steel melts. It falls under the 'other' ferro-manganese category due to its carbon content.
High-Carbon Ferromanganese Lumps (1.5% Carbon)
Ferromanganese lumps with approximately 1.5% carbon, used as an alloying additive in steel production to enhance manganese content and deoxidize molten steel. It falls under the 'other' ferro-manganese category.
Low-Carbon Ferromanganese 80C
Low-carbon ferromanganese alloy with 75-82% manganese and less than 1% carbon, used as a deoxidizer in steel production. This product is classified under the 'other' ferro-manganese category.