FeMn 75C Low Carbon Lumps
Low-carbon ferromanganese in lump form, containing approximately 75% manganese and less than 1% carbon by weight, sized 10-50mm. It is used as an additive in electric arc furnace steelmaking to adjust manganese content and deoxidize the melt.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the ferromanganese contains more than 2% carbon by weight
High-carbon ferromanganese is classified separately under heading 7202.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the carbon content is below 1% and manganese content is clearly stated on the commercial invoice
• Provide a mill certificate or lab analysis to support classification
• Verify if a Canadian import permit is required for ferroalloys under the Export and Import Permits Act
Related Products under Tariff item 7202.19.00
FeMn LC Standard Grade
Standard low-carbon ferromanganese with 0.5-1.0% carbon and 75-80% manganese, used for desulfurization and alloying in steel melts. It is a ferroalloy commonly added during secondary steelmaking.
Ferromanganese Chips (1.4% Carbon)
Chipped ferromanganese remnants with 1.4% carbon content, recycled for secondary alloying additions in steel production. The chips are a by-product of ferromanganese processing and are used as a cost-effective alloying material.
Ferromanganese Granules (1.8% Carbon)
Granular ferromanganese alloy with 1.8% carbon, sized 3-10mm for rapid dissolution in steel melts. It is a medium-carbon ferroalloy used for efficient alloying in steelmaking processes.
High-Carbon Ferromanganese Lumps (1.5% Carbon)
Ferromanganese lumps containing approximately 1.5% carbon by weight, used primarily as an alloying additive in steel production to enhance manganese content and deoxidize molten steel. It is a medium-carbon ferroalloy in lump form.
Low-Carbon Ferromanganese 80C
Low-carbon ferromanganese alloy with 75-82% manganese, less than 1% carbon, and balance iron, used primarily as a deoxidizer in steel production. It is supplied in lump or granular form for easy addition to molten steel.
Low-Carbon Manganese Master Alloy
Master alloy grade ferromanganese with maximum 0.8% carbon, used for precise manganese additions in continuous casting processes. It is a low-carbon ferroalloy that helps control steel composition accurately.