With at least one outer ply of pine
Plywood, veneered panels and similar laminated wood. > Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: > Other, with both outer plies of coniferous wood > With at least one outer ply of pine
Duty Rate (from China)
Products classified under Tariff item 4412.39.00.10
12mm Radiata Pine Plywood
Structural plywood panel from New Zealand radiata pine, consisting solely of wood plies not exceeding 6mm each, with both faces coniferous. The surface is natural or clear-coated to show the grain texture. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.0040mm Spruce Plywood Panel
This is a plywood panel made from multiple thin sheets of spruce wood, each ply not exceeding 6 mm thick, with both outer plies being coniferous spruce. It is not surface-covered or covered only with transparent material that reveals the natural grain. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Baltic Pine Face Multi-Ply Board
Multi-ply board with a Baltic-sourced European red pine face, all coniferous plies not exceeding 6mm, and a transparent protective layer. The surface is not obscured, allowing the natural grain to show. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Cedar Cabinet Plywood Panels
This is a high-quality plywood panel for cabinetry using western red cedar thin sheets (≤6 mm plies), with both outer plies being coniferous cedar showing natural grain. It has a clear finish only, with no opaque coverings. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Clear-Finished Red Pine Face Structural Plywood
Structural plywood panel with a Pinus sylvestris face for aesthetic framing, with pine core plies all under 6mm and a clear finish revealing the markings. The surface is not obscured, and both outer plies are coniferous. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Cabinet Back Plywood Panel
Thin plywood panels for cabinetry backs, made from wood sheets each not exceeding 6 mm, with outer plies coniferous and Douglas fir on at least one face, unsurfaced or clear-coated. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Cabinet Grade Plywood 5/8 Inch
This is cabinet-grade plywood featuring Douglas fir outer plies from thin wood sheets not exceeding 6 mm each, fully sanded on one face to a smooth finish without additional processing or coverings that obscure the grain. It is ideal for interior cabinetry. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir CDX Rough Plywood for Framing
This is CDX-grade plywood with Douglas fir exposure (one outer ply), made exclusively from coniferous wood sheets not exceeding 6 mm, with both outer plies coniferous. It is rough or touch sanded solely for sizing without grain-obscuring treatments. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Construction Plywood 19/32 Inch Sanded
This is 19/32 inch thick construction plywood with Douglas fir face and back veneers not exceeding 6 mm, fully sanded on at least one face for structural use, with no additional surface treatments obscuring the coniferous grain. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Crate Lining Plywood
Thin ply liner for wooden crates, with coniferous Douglas fir outer plies, each ply not exceeding 6 mm. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Drawer Bottom Plywood
Thin plywood cut for furniture drawer bottoms, with wood plies not exceeding 6 mm each, Douglas fir coniferous outer faces, and a clear finish. This product fits the 'other' category in tariff item 4412.39.00 for non-covered Douglas fir plywood.
4412.39.00Douglas Fir Exterior Rough Plywood Siding
This is rough plywood panels designed for exterior siding, with Douglas fir as at least one outer ply, made from coniferous sheets not exceeding 6 mm per ply, minimally touch sanded for sizing. It lacks any grain-obscuring treatments. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Marine Plywood Panel
A plywood panel made with multiple thin sheets of wood, featuring at least one outer ply of Douglas fir and other outer plies of coniferous wood, each ply not exceeding 6 mm thick. Not surface-covered or covered only with a clear finish, this product is classified under tariff item 4412.39.00.
4412.39.00Douglas Fir Rough Plywood Panel 4x8 ft
This is a 4x8 foot plywood sheet made with at least one outer ply of Douglas fir, consisting solely of wood sheets each not exceeding 6 mm thick, with both outer plies of coniferous wood. It is rough or touch sanded for sizing. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Sanded Lumber Core Plywood 4x8 Sheet
4x8 ft plywood sheets with lumber core construction but outer plies of Douglas fir veneers, each ply not exceeding 6 mm, fully sanded on the face side without further treatment. Both outer layers are coniferous Douglas fir, making it classifiable under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Sanded Plywood Panel 3/4 Inch
A plywood panel consisting solely of thin wood sheets with both outer plies made from coniferous Douglas fir wood, fully sanded on at least one face for a smooth finish but not further processed. Each ply does not exceed 6 mm, meeting the requirements of tariff item 4412.39.00.
4412.39.00Douglas Fir Sanded Shelf Board Plywood 11/32 Inch
Thin 11/32 inch plywood shelf boards with Douglas fir coniferous outer plies, each ply not exceeding 6 mm thick, fully sanded on one face for shelving, with no obscuring coverings or further work. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Single Face Sanded Plywood for Furniture
Plywood panels designed for furniture applications, with Douglas fir coniferous outer plies each not exceeding 6 mm thick, fully sanded on one primary face but left rough on the back, with no grain-obscuring coverings. Consisting solely of wood sheets, this product is classified under tariff item 4412.39.00.
4412.39.00Douglas Fir Structural Rough Plywood 3/4 Inch
This is a 3/4-inch thick structural plywood with Douglas fir outer ply, constructed from multiple coniferous wood sheets each not exceeding 6 mm, with both faces coniferous. It is supplied rough or touch sanded for sizing without further refinement. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Touch-Sanded Sheathing Plywood
This is structural sheathing plywood featuring Douglas fir on at least one outer face, layered from thin wood sheets (each not exceeding 6 mm), with both outer plies coniferous. It is touch sanded solely for dimension control with no additional finishing. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Underlayment Plywood Sanded One Face
Underlayment plywood with Douglas fir outer plies from wood sheets not exceeding 6 mm, sanded fully on the top face for flooring applications but not further processed, with grain visible through a clear finish. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Underlayment Rough Plywood Sheets
This is plywood sheets for flooring underlayment with at least one Douglas fir outer ply, solely wood sheets not exceeding 6 mm thick, with coniferous outer plies. It is touch sanded for sizing purposes only and free of obscuring coverings. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Utility Plywood
This is utility-grade plywood from Douglas fir veneers, with all plies not exceeding 6 mm and outer plies being coniferous with no obscuring surface cover. It is designed for general construction and sheathing applications. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Douglas Fir Utility Plywood Sheathing 1/2 Inch
Utility-grade plywood sheathing made from sheets of Douglas fir veneers, each not exceeding 6 mm thick, with both outer plies coniferous Douglas fir, fully sanded on one face for improved adhesion but not further worked. The natural wood grain remains visible, classifying it under tariff item 4412.39.00.
4412.39.00European Red Pine Face Baltic Birch Plywood
Plywood panel featuring a face ply of European red pine over a core of birch veneers, with all plies under 6mm thick and both outer plies coniferous. It has no surface covering or only transparent coatings, preserving the natural appearance. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00European Red Pine Top Layer Utility Plywood
Utility-grade plywood with a Pinus sylvestris face for visible applications, backed by fir plies all not exceeding 6mm, with no covering or clear varnish preserving the texture. Both outer plies are coniferous, and the surface is not obscured. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Hem-Fir Structural Plywood
This is engineered plywood from mixed hemlock-fir stands, with all wood plies not exceeding 6 mm and coniferous outer plies. The surface is natural or transparent sealed. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Larch Exterior Plywood Sheathing
This is exterior-grade sheathing plywood made from larch wood plies (each not exceeding 6 mm), featuring coniferous larch outer faces with a clear protective coating. No grain-obscuring surfaces are present. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Parana Pine Coniferous Core Plywood Door Skin 3mm
Ultra-thin 3mm door skin plywood with Parana pine face ply over a coniferous core, all plies not exceeding 6mm thickness. The surface is either uncovered or covered only with a transparent sealer, preserving the natural wood grain. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Parana Pine Face Laminated Wood Panel for Furniture 12mm
Laminated plywood panel with a total thickness of 12mm, featuring a Parana pine face ply and all sheets of coniferous wood, each not exceeding 6mm. The surface is uncovered or transparently finished, allowing the natural grain to show. This product qualifies as other plywood with both outer plies of coniferous wood under tariff item 4412.39.00.
4412.39.00Parana Pine Face Plywood Panel 4x8 ft 3/4 inch
Standard 4x8 foot plywood sheet with a thickness of 3/4 inch, featuring a face ply of Parana pine and all other plies of coniferous wood, each not exceeding 6mm. The surface is not surface-coated or only transparently finished, preserving the natural appearance. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Parana Pine Plywood for Wall Paneling 5.2mm 4x8 Sheet
Thin 5.2mm plywood sheet with a Parana pine face for decorative interior wall paneling, with all coniferous plies not exceeding 6mm. The natural finish preserves the wood texture, and the surface is not obscured. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Parana Pine Plywood Shelf Board 3/4 inch x 48x96 inch
Structural plywood shelf board with a Parana pine face ply, designed for retail shelving, featuring coniferous outer plies each not exceeding 6mm. The surface has no obscuring treatment, allowing the natural grain to be visible. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Parana Pine Veneer Plywood for Cabinetry 1220x2440mm 18mm
Metric-sized plywood panel (1220x2440mm, 18mm thick) with a Parana pine face ply for high-end cabinet doors, backed by coniferous core plies all not exceeding 6mm. The surface is clear-coated to highlight the natural texture without obscuring the grain. This product qualifies as other plywood with both outer plies of coniferous wood under tariff item 4412.39.00.
4412.39.00Pine Marine-Grade Plywood Sheet
This is water-resistant plywood constructed from pine veneers, each not exceeding 6 mm thick, featuring coniferous pine outer plies with minimal surface treatment. It meets the criteria for unsurfaced or transparently coated coniferous plywood. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Pinus Silvestris Exposed Face Shop Plywood
Shop-grade plywood exposing natural Pinus sylvestris grain on the face ply, with fir backing, and no surface cover. Both outer plies are coniferous, and each ply is not exceeding 6mm. This product qualifies as other plywood with both outer plies of coniferous wood under tariff item 4412.39.00.
4412.39.00Pinus Silvestris Face Pine Core Plywood Sheet
A laminated wood panel with European red pine as the exposed face ply, coniferous pine inner layers, each ply not exceeding 6mm, and a clear UV-protective coating only. The surface is not obscured, and both outer plies are coniferous. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Pinus Silvestris Grain-Visible Cabinet Plywood
High-quality plywood for cabinetry with an exposed European red pine face ply, larch crossbands, and a transparent sealant only, with all plies being thin wood sheets not exceeding 6mm. Both outer plies are coniferous, and the surface is not obscured. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Scandinavian Red Pine Veneer Plywood Panel
Plywood consisting of thin wood sheets with a top face ply of Pinus sylvestris from Scandinavian sources, a spruce core, both outer plies coniferous, and unsurfaced or with a transparent oil finish showing the grain. Each ply is not exceeding 6mm. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
4412.39.00Scots Pine Underlayment Plywood
This is smooth underlayment plywood from Scots pine veneers not exceeding 6 mm thick, with coniferous outer plies and a clear factory sand and seal. It is designed for flooring substructure. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.