Douglas Fir Sanded Lumber Core Plywood 4x8 Sheet
4x8 ft plywood sheets with lumber core construction but outer plies of Douglas fir veneers, each ply not exceeding 6 mm, fully sanded on the face side without further treatment. Both outer layers are coniferous Douglas fir, making it classifiable under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the plywood has at least one outer ply of tropical wood
Plywood with tropical wood outer plies falls under a different subheading.
If the plywood has both outer plies of non-coniferous wood
Plywood with both outer plies of non-coniferous wood is classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure each ply does not exceed 6 mm thickness and that both outer plies are coniferous to qualify for this tariff item
• Provide a detailed product description and mill certificate to the CBSA to avoid reclassification
• Verify whether the lumber core is made of solid wood pieces, as this may affect classification
Related Products under Tariff item 4412.39.00
12mm Radiata Pine Plywood
Structural plywood panel from New Zealand radiata pine, consisting solely of wood plies not exceeding 6mm each, with both faces coniferous. The surface is natural or clear-coated to show the grain texture. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
40mm Spruce Plywood Panel
This is a plywood panel made from multiple thin sheets of spruce wood, each ply not exceeding 6 mm thick, with both outer plies being coniferous spruce. It is not surface-covered or covered only with transparent material that reveals the natural grain. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Baltic Pine Face Multi-Ply Board
Multi-ply board with a Baltic-sourced European red pine face, all coniferous plies not exceeding 6mm, and a transparent protective layer. The surface is not obscured, allowing the natural grain to show. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Cedar Cabinet Plywood Panels
This is a high-quality plywood panel for cabinetry using western red cedar thin sheets (≤6 mm plies), with both outer plies being coniferous cedar showing natural grain. It has a clear finish only, with no opaque coverings. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Clear-Finished Red Pine Face Structural Plywood
Structural plywood panel with a Pinus sylvestris face for aesthetic framing, with pine core plies all under 6mm and a clear finish revealing the markings. The surface is not obscured, and both outer plies are coniferous. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Douglas Fir Cabinet Back Plywood Panel
Thin plywood panels for cabinetry backs, made from wood sheets each not exceeding 6 mm, with outer plies coniferous and Douglas fir on at least one face, unsurfaced or clear-coated. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.