Douglas Fir Single Face Sanded Plywood for Furniture
Plywood panels designed for furniture applications, with Douglas fir coniferous outer plies each not exceeding 6 mm thick, fully sanded on one primary face but left rough on the back, with no grain-obscuring coverings. Consisting solely of wood sheets, this product is classified under tariff item 4412.39.00.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | +50.0% | 50% |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If at least one outer ply is tropical wood
Tropical wood outer plies are classified under a different subheading.
If both outer plies are non-coniferous
Non-coniferous outer plies lead to a different tariff item.
If the plywood has surface coverings
Plywood with surface coverings is classified under a separate item.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the plywood is not covered with any material that obscures the grain, as this would change classification
• Document that both outer plies are coniferous Douglas fir to support the tariff item
• Be prepared to show that the product is not further processed beyond sanding on one face
Related Products under Tariff item 4412.39.00
12mm Radiata Pine Plywood
Structural plywood panel from New Zealand radiata pine, consisting solely of wood plies not exceeding 6mm each, with both faces coniferous. The surface is natural or clear-coated to show the grain texture. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
40mm Spruce Plywood Panel
This is a plywood panel made from multiple thin sheets of spruce wood, each ply not exceeding 6 mm thick, with both outer plies being coniferous spruce. It is not surface-covered or covered only with transparent material that reveals the natural grain. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Baltic Pine Face Multi-Ply Board
Multi-ply board with a Baltic-sourced European red pine face, all coniferous plies not exceeding 6mm, and a transparent protective layer. The surface is not obscured, allowing the natural grain to show. This product falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Cedar Cabinet Plywood Panels
This is a high-quality plywood panel for cabinetry using western red cedar thin sheets (≤6 mm plies), with both outer plies being coniferous cedar showing natural grain. It has a clear finish only, with no opaque coverings. It falls under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Clear-Finished Red Pine Face Structural Plywood
Structural plywood panel with a Pinus sylvestris face for aesthetic framing, with pine core plies all under 6mm and a clear finish revealing the markings. The surface is not obscured, and both outer plies are coniferous. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.
Douglas Fir Cabinet Back Plywood Panel
Thin plywood panels for cabinetry backs, made from wood sheets each not exceeding 6 mm, with outer plies coniferous and Douglas fir on at least one face, unsurfaced or clear-coated. This product is classified under tariff item 4412.39.00 as other plywood with both outer plies of coniferous wood.