Of a density not exceeding 0.5 g/cm³
Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. > Other: > Of a density not exceeding 0.5 g/cm³ > Of a density not exceeding 0.5 g/cm³
Duty Rate (from China)
Subheadings
Products classified under Tariff item 4411.9
Bagasse HDF Raw Sheet
High-density fiberboard sheet manufactured from sugarcane bagasse, a ligneous material, with a density exceeding 0.8 g/cm³. The board is delivered in rough form without mechanical working or surface covering, making it suitable for further processing into panels or boards.
4411.92.90Commercial Ceiling Tileboard with Bullnose Edges
High-density fiberboard ceiling tileboard featuring bullnose edges continuously machined for exposed grid systems in office buildings. The density exceeds 0.8 g/cm³, and the product is dedicated for suspended ceiling construction applications.
4411.92.90Compressed Hardboard Pegboard
Compressed hardboard pegboard with pre-punched holes for display systems, made from wood fibers and resins. The density exceeds 0.8 g/cm³, and the product is used in retail for hanging tools and merchandise, classifying it under 4411.92.90 as other high-density fibreboard.
4411.92.90Hardboard Siding Panel
High-density hardboard panels exceeding 0.8 g/cm³ used for exterior siding, manufactured from compressed wood fibers and resins. The product is classified under 4411.92.90 as other high-density fibreboard, not specified for flooring or other uses.
4411.92.90Hardboard Tileboard with V-Grooved Edges for Ceilings
High-density hardboard tileboard with continuously V-grooved edges, designed to mimic tile patterns for drop-ceiling installations in commercial spaces. The density exceeds 0.8 g/cm³, and the edges are worked to facilitate precise alignment, classifying it under tariff item 4411.92.90 as other high-density fibreboard.
4411.92.90HDF Back Panel for Cabinets
High-density fiberboard back panels over 0.8 g/cm³ used in kitchen cabinets, made from resin-bonded wood fibers. The product provides structural rigidity and is classified under 4411.92.90 as other high-density fibreboard.
4411.92.90HDF Cabinet Back Panel 16mm
16mm high-density fiberboard panels cut for modular cabinet backs, with a density exceeding 0.8 g/cm³. The panels are bare with an oil option for handling, providing a dust barrier in furniture assembly.
4411.92.90HDF Core Stock 18mm Thickness
18mm thick high-density fiberboard core material for laminated flooring underlay or furniture cores, with a density exceeding 0.8 g/cm³. The surface is untreated except for oil, providing structural rigidity before overlay application.
4411.92.90HDF Door Skin
Thin high-density fiberboard sheets over 0.8 g/cm³ density used as door skins for interior doors, bonded with synthetic resins. The product is classified under 4411.92.90 as other high-density fibreboard, ideal for painting and finishing.
4411.92.90HDF Door Skin Blank 2135x915mm
Unfinished high-density fiberboard blanks sized for interior door skins, with a density exceeding 0.8 g/cm³. The blanks are not coated except possibly oil-treated for moisture resistance, and are used by door manufacturers before final painting or lamination.
4411.92.90HDF Flush Door Blank 7x36 Inch
Flush-style high-density fiberboard door blanks for painting or staining, with a density exceeding 0.8 g/cm³. The blanks have no surface treatment beyond oil, are sized for residential doors, and serve as raw material for door fabricators.
4411.92.90HDF Flush Door Panel
Flush high-density fiberboard panels over 0.8 g/cm³ density for flat interior doors, bonded wood fibers. The product is classified under 4411.92.90 as other high-density fibreboard, with a smooth surface that accepts paint or laminate finishes.
4411.92.90HDF Shelf Board 3050x1220mm
Extra-long high-density fiberboard panels for shelving applications in retail fixtures, with a density exceeding 0.8 g/cm³. The panels have a bare surface with optional oil impregnation and are not suitable for direct consumer exposure without further finishing.
4411.92.90HDF Subfloor Underlayment Sheet
High-density fiberboard sheets for subfloor underlayment in construction, with a density exceeding 0.8 g/cm³. The sheets have an oil-treated surface only for water resistance and stabilize flooring installations.
4411.92.90High-Density Fiberboard Countertop Slab
Large slabs of HDF exceeding 0.8 g/cm³ for custom countertops, resin-bonded wood fibers cut to size. The product is classified under 4411.92.90 as other high-density fibreboard, requiring post-import surfacing for kitchen use.
4411.92.90High-Density Fiberboard (HDF) Panel
High-density fiberboard panels with density exceeding 0.8 g/cm³, made from wood fibers bonded with resins, used for furniture and cabinetry construction. The product is classified under 4411.92.90 as other fibreboard of wood.
4411.92.90High-Density Fiberboard (HDF) Panel 1220x2440mm
High-density fiberboard made from wood fibers bonded with resins, with a density exceeding 0.8 g/cm³, used for furniture and cabinetry cores. The board lacks surface covering except for possible oil treatment, distinguishing it from finished products.
4411.92.90High-Density Fiberboard (HDF) Raw Panel
Raw high-density fiberboard panel made from wood fibers bonded with resins, with a density exceeding 0.8 g/cm³. The panel is not mechanically worked beyond basic formation and has no surface covering, making it an intermediate product for furniture or construction.
4411.92.90High-Density Fiberboard Shiplap Tileboard for Partitions
Shiplap-edged high-density fiberboard tileboard for temporary office partitions and room dividers in building construction. The density exceeds 0.8 g/cm³, and the resin-bonded ligneous materials have continuously profiled edges, classifying it under 4411.92.90 as other high-density fibreboard.
4411.92.90High-Density MDF Shelving Board
Shelving boards made from high-density fiberboard exceeding 0.8 g/cm³, from agglomerated wood fibers and binders, cut to standard sizes. The product is classified under 4411.92.90 as other high-density fibreboard, used in retail and storage applications.
4411.92.90High-Density MDF Tileboard with Tongue-and-Groove Edges
High-density MDF tileboard with tongue-and-groove edges for seamless interlocking during installation. The density exceeds 0.8 g/cm³, and the edges are continuously worked, classifying it under tariff item 4411.92.90 as other high-density fibreboard.
4411.92.90Industrial HDF Backing Board
Rough high-density fiberboard panels used as backing in cabinetry and shelving, with a density exceeding 0.8 g/cm³. The panels are free of mechanical working or coatings, serving as a base material for further finishing.
4411.92.90MDF Wall Tileboard with Beveled Edges
MDF wall tileboard with beveled edges, upgraded to high density exceeding 0.8 g/cm³, for shiplap-style wall installations in homes. The beveled edges are continuously machined, and the product is dedicated for interior partition and accent walls, classifying it under 4411.92.90 as other high-density fibreboard.
4411.92.90Moisture-Resistant MDF Tileboard with Densified Edges
Moisture-resistant high-density MDF tileboard with densified, continuously worked edges for bathroom walls and wet areas. The density exceeds 0.8 g/cm³, and the product is bonded with resins for building construction durability, classifying it under 4411.92.90 as other high-density fibreboard.
4411.92.90Plain HDF Slab for Lamination
Unfinished high-density fiberboard slabs prepared for subsequent lamination in panel processing, with a density exceeding 0.8 g/cm³. The slabs have no surface treatment or mechanical finishing, making them suitable for further processing.
4411.92.90Primed Hardboard Tileboard with Rabbeted Edges
Factory-primed high-density hardboard with rabbeted edges for flush wall paneling in new construction. The density exceeds 0.8 g/cm³, and the continuously worked edges enable hidden fastening systems, classifying it under tariff item 4411.92.90 as other high-density fibreboard.
4411.92.90Raw Bamboo High-Density Fiberboard
High-density fiberboard manufactured from bamboo fibers, with a density exceeding 0.8 g/cm³. The board is supplied in rough, unworked form without surface coverings, and bamboo is considered a woody material under Chapter 44.
4411.92.90Rough HDF Underscore Panel
Unprocessed high-density fiberboard panels used under flooring or countertops as substrate, with a density exceeding 0.8 g/cm³. The panels are strictly not mechanically worked or coated, serving as a base material for construction.
4411.92.90Textured Wall Tileboard with Chamfered Edges
Textured high-density fiberboard tileboard with chamfered edges for feature walls in hospitality construction. The density exceeds 0.8 g/cm³, and the edges are machined continuously for mitre joints, classifying it under 4411.92.90 as other high-density fibreboard.
4411.92.90Unprocessed HDF Coreboard Sheet
Unworked sheet of high-density fiberboard used as core material in furniture manufacturing, with a density exceeding 0.8 g/cm³. The sheet is produced from lignocellulosic fibers without resins exceeding bonding limits, and is not mechanically worked or coated.
4411.93.00Acoustic MDF Tongue and Groove Ceiling Panels
Acoustic MDF tongue-and-groove ceiling panels with sound-absorbing perforated surfaces and continuous tongue/groove edges, density 0.55 g/cm³. Designed for suspended ceiling systems in commercial buildings, the edge treatment allows seamless installation. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Colonial Style MDF Chair Rail Molding
Classic colonial profile chair rail molding manufactured from medium-density fiberboard, density 0.5-0.8 g/cm³. Classified under tariff item 4411.93.00 as fibreboard of the specified density, used for protecting walls from chair backs.
4411.93.00Decorative Laminate T&G Wall Cladding Board
Decorative laminate tongue-and-groove wall cladding board with a medium density fibreboard (MDF) core at 0.6 g/cm³, bonded with a high-pressure laminate synthetic resin surface. Designed for vertical wall cladding in hospitality buildings, its edge profiling allows seamless installation. Classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Fire-Rated Resin Fiberboard Ceiling Panel
Fire-rated resin fibreboard ceiling panel with a density of 0.72 g/cm³, impregnated with fire-retardant synthetic resins and featuring continuous groove-and-tongue edges. Designed for suspended ceiling frameworks in public buildings, it meets stringent building code requirements. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Hardwood MDF Underlayment Sheet
Medium density fiberboard sheet made from hardwood fibers, density 0.7 g/cm³, used as flooring underlayment or subflooring substrate. Bonded with resins but not surface-covered or mechanically worked beyond cutting.
4411.93.00Industrial MDF Workboard 5/8 Inch
5/8 inch medium density fiberboard designed for workbenches and industrial tables, 0.65 g/cm³ density, oil-treated surface only. High impact resistance for shop environments, not surface-covered with other materials.
4411.93.00MDF Drop Ceiling Groove Panels
MDF drop ceiling groove panels with a density of 0.62 g/cm³, featuring continuous groove edges for interlocking drop ceiling tiles in commercial buildings. Designed specifically for suspended ceiling grid systems with tongue/groove connections. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00MDF Rabbet Edge Partition Wall Panels
MDF rabbet edge partition wall panels with a density of 0.65 g/cm³, featuring continuous rabbeted edges for flush partition wall systems. Produced specifically for commercial office dividers and hotel room partitions, the edge design facilitates seamless installation. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00MDF Router Blank Sheet
Plain medium density fiberboard sheets, density 0.75 g/cm³, optimized for CNC routing into custom shapes for signage and displays. Resin-bonded for machinability, these sheets are classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00MDF Shelf Board 18mm
Pre-cut medium density fiberboard shelf board, 18mm thick, density 0.6 g/cm³, bonded with synthetic resins for interior shelving in wardrobes and cabinets. Classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00MDF V-Groove Wall Cladding Panels
MDF V-groove wall cladding panels with a density of 0.7 g/cm³, featuring continuous tongue and groove edges plus V-groove detailing. Manufactured specifically for interior wall cladding in construction projects, the edge profiling enables seamless installation. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00MDF Wall Paneling Board
Medium density fiberboard panels for interior wall applications, density 0.55 g/cm³, resin-bonded wood fibers with a textured surface. Classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Medium Density Fiberboard (MDF) 3/4 Inch Sheet
Standard 3/4 inch thick medium density fiberboard panels made from wood fibers bonded with resins, density between 0.5-0.8 g/cm³. Not surface-covered except for possible oil treatment, used primarily for general construction.
4411.93.00Medium Density Fiberboard (MDF) Panel 3/4 Inch
Standard medium density fiberboard (MDF) panel, 3/4 inch thick, with density between 0.5-0.8 g/cm³, made from wood fibers bonded with resins. Used for cabinetry and furniture construction, it is classified under tariff item 4411.93.00 as fibreboard of the specified density range.
4411.93.00Medium Density Fiberboard (MDF) Raw Panels
Unprocessed medium density fiberboard panels with density between 0.5-0.8 g/cm³, made from wood fibers bonded with resins. Not mechanically worked beyond basic forming or surface covered, used as base material for further processing.
4411.93.00Medium Density Fiberboard (MDF) Tongue and Groove Wall Panels
Medium density fibreboard (MDF) tongue and groove wall panels made from wood fibres bonded with resins, with a density between 0.5 and 0.8 g/cm³. They feature continuous tongue, groove, or rabbet edges along all sides, specifically designed and dedicated for wall panelling. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Melamine Faced MDF Wall Panel
Melamine-faced MDF wall panel with a density between 0.5 and 0.8 g/cm³, laminated on both sides with melamine resin-impregnated paper for a decorative and protective finish. Features continuous tongue-and-groove edges for easy installation. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Moisture-Resistant T&G Shower Wall Board
Moisture-resistant tongue-and-groove shower wall board made from resin-impregnated high-density fibreboard (HDF) at 0.68 g/cm³, with full synthetic resin bonding for wet areas. Features tongue-groove-rabbet edges for bathroom shower wall linings in residential construction. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Oak Grain MDF Crown Molding
Crown molding made from medium-density fiberboard with embossed oak grain texture and primer coating. Classified under tariff item 4411.93.00 as fibreboard of density 0.5-0.8 g/cm³, distinguished by its decorative surface.
4411.93.00Phenolic Resin Partition Wall Fiberboard
Phenolic resin partition wall fibreboard with a density of 0.55 g/cm³, impregnated with phenolic synthetic resins for fire-retardant properties. Features grooved and tongued edges continuously along edges for modular office partition walls. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Plain MDF Sheets 1220x2440mm
Standard size medium density fiberboard sheets (1220x2440mm), wood fiber-based with resin binders, density 0.5-0.8 g/cm³. Neither mechanically worked nor surface-covered, common for shelving and millwork blanks.
4411.93.00Plain MDF Shelf Board 18mm Thick
18mm thick medium density fiberboard panels for shelving applications in retail fixtures, density 0.7 g/cm³, no surface covering beyond oil treatment. Standard size 4x8 feet sheets cut to order.
4411.93.00Poplar MDF Furniture Blank
Medium density fiberboard composed primarily of poplar wood fibers, density 0.6 g/cm³, cut to standard furniture blank sizes for table tops and drawer bottoms. Classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Prefinished MDF Shiplap Ceiling Planks
Prefinished MDF shiplap ceiling planks with rabbeted edges forming a shiplap profile, density 0.6 g/cm³. Intended exclusively for ceiling installations in homes and offices, the continuous edge machining along lengths enables seamless fitting. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Primed Finger-Joint Pine Casing Molding
Fiberboard casing molding with finger-joint construction and white primer, density 0.5-0.8 g/cm³, for window and door casings. Classified under tariff item 4411.93.00 as fibreboard of the specified density, not solid lumber, due to reconstituted wood.
4411.93.00Primed MDF Tongue and Groove Wainscot Panels
Primed MDF tongue and groove wainscot panels with a density of 0.75 g/cm³, dedicated for wainscot wall applications in residential construction. Continuous edge profiling enables traditional plank-style installation. Classified under 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
4411.93.00Raw Hardboard Panels Density 0.6 g/cm³
Medium density hardboard made from ligneous materials, density exceeding 0.5 but not over 0.8 g/cm³. Not mechanically worked or surface-covered, retaining natural fiberboard texture, used in flat-pack furniture substrate.
4411.93.00Raw MDF Substrate for Laminating
Medium density fiberboard panels prepared as plain substrates for post-import lamination, density exceeding 0.5 g/cm³ up to 0.8 g/cm³. No mechanical working or surface treatment applied, used in custom furniture manufacturing.
4411.93.00Raw MDF Underlayment Board 1/2 Inch
1/2 inch medium density fiberboard sheets specifically for flooring underlayment, density 0.55 g/cm³, untreated surface except light oil application. Provides smooth substrate for vinyl or laminate flooring installation.
4411.93.00Recycled Wood Fiberboard Core 12mm
Density-controlled fiberboard, 12mm thick, density 0.65 g/cm³, made from 100% recycled wood fibers and bonded with low-formaldehyde resins. Used as core material for laminated furniture, it is classified under tariff item 4411.93.00 as fibreboard of density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.