Medium Density Fiberboard (MDF) Raw Panels
Unprocessed medium density fiberboard panels with a density between 0.5 and 0.8 g/cm³, made from wood fibers bonded with resins. These raw sheets are not mechanically worked or surface-covered, serving as base material for further fabrication.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If density exceeds 0.8 g/cm³
Higher density fiberboard falls under a different tariff item.
If density is less than or equal to 0.5 g/cm³
Lower density fiberboard is classified separately.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the density certificate confirms 0.5-0.8 g/cm³ to avoid reclassification
• Declare the end-use as raw substrate for manufacturing
• Keep resin content documentation for verification
Related Products under Tariff item 4411.93.00
Hardwood MDF Underlayment Sheet
Medium density fiberboard sheet made from hardwood fibers, density 0.7 g/cm³, used as flooring underlayment or subflooring substrate. Bonded with resins but not surface-covered.
Industrial MDF Workboard 5/8 Inch
5/8 inch medium density fiberboard designed for workbenches and industrial tables, density 0.65 g/cm³, oil-treated surface only. High impact resistance for shop environments, not surface-covered beyond oil.
Medium Density Fiberboard (MDF) 3/4 Inch Sheet
Standard 3/4 inch thick medium density fiberboard panels made from wood fibers bonded with resins, density between 0.5-0.8 g/cm³. Not surface-covered except for possible oil treatment, used primarily for furniture and cabinetry.
Plain MDF Sheets 1220x2440mm
Standard size medium density fiberboard sheets (1220x2440mm), wood fiber-based with resin binders, density 0.5-0.8 g/cm³. Neither mechanically worked nor surface-covered, commonly used for shelving and millwork blanks.
Plain MDF Shelf Board 18mm Thick
18mm thick medium density fiberboard panels for shelving applications in retail fixtures, density 0.7 g/cm³, no surface covering beyond oil treatment. Standard size 4x8 feet sheets cut to order.
Raw Hardboard Panels Density 0.6 g/cm³
Medium density hardboard made from ligneous materials, density exceeding 0.5 but not over 0.8 g/cm³. Not mechanically worked or surface-covered, retaining natural fiberboard texture, used in flat-pack furniture substrate.