Bagasse HDF Raw Sheet
High-density fiberboard sheet manufactured from sugarcane bagasse, a ligneous material, with a density exceeding 0.8 g/cm³. The board is delivered in rough form without mechanical working or surface covering, making it suitable for further processing into panels or boards.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 6% | — | 6% |
| 🇲🇽Mexico | 6% | — | 6% |
| 🇺🇸United States | 6% | — | 6% |
| 🇩🇪Germany | 6% | — | 6% |
| 🇯🇵Japan | 6% | — | 6% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the board is resin-impregnated with 17% or more phenol-formaldehyde resin for use in overlaid plywood or particle board
This sibling item covers resin-impregnated boards with specific resin content and end-use, which would otherwise fall under the 'Other' category.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the density exceeds 0.8 g/cm³ and the product is not mechanically worked or surface covered to qualify for this item
• Declare the material as bagasse (ligneous) and provide technical data sheets to support classification
• Verify if any anti-dumping or countervailing duties apply to the country of origin
Related Products under Tariff item 4411.92.90
Commercial Ceiling Tileboard with Bullnose Edges
High-density fiberboard ceiling tileboard featuring bullnose edges continuously machined for exposed grid systems in office buildings. The density exceeds 0.8 g/cm³, and the product is dedicated for suspended ceiling construction applications.
Compressed Hardboard Pegboard
Compressed hardboard pegboard with pre-punched holes for display systems, made from wood fibers and resins. The density exceeds 0.8 g/cm³, and the product is used in retail for hanging tools and merchandise, classifying it under 4411.92.90 as other high-density fibreboard.
Hardboard Siding Panel
High-density hardboard panels exceeding 0.8 g/cm³ used for exterior siding, manufactured from compressed wood fibers and resins. The product is classified under 4411.92.90 as other high-density fibreboard, not specified for flooring or other uses.
Hardboard Tileboard with V-Grooved Edges for Ceilings
High-density hardboard tileboard with continuously V-grooved edges, designed to mimic tile patterns for drop-ceiling installations in commercial spaces. The density exceeds 0.8 g/cm³, and the edges are worked to facilitate precise alignment, classifying it under tariff item 4411.92.90 as other high-density fibreboard.
HDF Back Panel for Cabinets
High-density fiberboard back panels over 0.8 g/cm³ used in kitchen cabinets, made from resin-bonded wood fibers. The product provides structural rigidity and is classified under 4411.92.90 as other high-density fibreboard.
HDF Cabinet Back Panel 16mm
16mm high-density fiberboard panels cut for modular cabinet backs, with a density exceeding 0.8 g/cm³. The panels are bare with an oil option for handling, providing a dust barrier in furniture assembly.