Planed Ipe Decking Boards 20mm
Ipe hardwood (Handroanthus spp.), a non-coniferous species, sliced lengthwise, planed and sanded to 20mm thickness for outdoor decking. This wood is end-jointed for stability. It is classified under 4407.99.00 as other non-coniferous sawn wood, planed and sanded.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the ipe is classified under a specific species subheading
Certain non-coniferous species have dedicated tariff items.
If the wood is sliced or peeled to less than 6mm thickness
Veneer sheets are classified in this heading.
If the boards are shaped continuously along the edges
Wood shaped along edges for construction is classified in this heading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the ipe is not further worked beyond planing, sanding, and end-jointing
• Provide the species and dimensions on the commercial invoice
• Be aware of any CITES regulations for this species
Related Products under Tariff item 4407.99.00
Black Walnut Sawn Lumber 1x6x8 ft
Black walnut sawn lumber boards, 1 inch thick by 6 inches wide by 8 feet long, planed and sanded, exceeding 6 mm, are a product of Juglans nigra. They are used in fine furniture and cabinetry. This tariff item covers sawn wood of non-coniferous species, not further worked beyond planing or sanding.
Bookmatched Walnut Panels 3/4x24x96 in
Bookmatched walnut panels, 3/4 inch thick by 24 inches by 8 feet, sawn lengthwise over 6 mm with sanding, are a product of Juglans spp. They are used for veneer matching in cabinet doors. This tariff item covers sawn wood of non-coniferous species, not further worked beyond sanding.
End-Jointed Pecan Lumber
End-jointed pecan lumber, sawn lengthwise to a thickness exceeding 6 mm and sanded, is a hardwood product of Carya illinoensis. It is used in applications such as baseball bats and flooring. This tariff item covers wood that is sawn, chipped, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, other than coniferous.
End-Jointed Poplar Lumber
End-jointed poplar lumber consists of yellow poplar boards sawn to a thickness exceeding 6 mm, with finger joints for length stability and a sanded surface. This product falls under tariff item 4407.99.00 as 'other' sawn wood of non-coniferous species, not elsewhere specified. It is commonly used for painted furniture and moldings.
End-Jointed Walnut Board 1x8x16 ft
End-jointed walnut boards, 1x8 inch profile, created from shorter stock to make 16-foot lengths, are a product of Juglans spp. They qualify as sawn walnut over 6 mm with permitted end-jointing for stability. This tariff item covers sawn wood of non-coniferous species, not further worked beyond end-jointing.
End-Jointed Wenge Sawn Wood 15mm
Wenge (Millettia laurentii), a non-coniferous African hardwood, sawn lengthwise, end-jointed, and sanded to 15mm thickness. This wood is used for musical instruments and decorative applications. It is classified under 4407.99.00 as other non-coniferous sawn wood, end-jointed and sanded.