Of ash (Fraxinus spp.)
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like. > Teak > Of ash (Fraxinus spp.) > Of ash (Fraxinus spp.)
Duty Rate (from China)
Subheadings
Products classified under Tariff item 4407.95.00
Ash Stair Tread Blanks
Rough-sawn ash (Fraxinus spp.) blanks for stair treads, exceeding 6 mm in thickness, with one face sanded. These blanks are used in high-traffic flooring applications and meet the tariff item's scope for sawn ash wood that is planed or sanded.
Ash Wood Beam Blanks
Sawn ash (Fraxinus spp.) beam blanks with a 6x8 inch cross-section, exceeding 6 mm in thickness, and planed surfaces. These are intended for structural timber framing and fall under the tariff item for ash wood that is sawn and planed.
Ash Wood Planks for Furniture
Sanded ash (Fraxinus spp.) planks, sawn lengthwise, with a thickness of 8/4 (over 6 mm), used primarily for tabletops and furniture frames. These planks meet the tariff item's scope for ash wood that is sawn and sanded.
Planed Ash Board 4/4 Thickness
Quarter-sawn planed ash boards (Fraxinus spp.) with a nominal 4/4 thickness exceeding 6 mm, sliced lengthwise for use in musical instrument bodies like guitar backs. These boards fall under the tariff item for sawn or sliced ash wood that is planed.
Rift-Sawn Ash Panels
Rift-sawn ash (Fraxinus spp.) panels, 12 mm thick, primarily sawn and planed, used for wall paneling. These panels are not end-jointed and fall under the tariff item for ash wood exceeding 6 mm in thickness.
Sanded Ash Tabletop Slabs
Live-edge sanded ash (Fraxinus spp.) slabs for tabletops, 2 inches thick (over 6 mm), sawn lengthwise. These slabs are popular for rustic dining tables and fall under the tariff item for planed or sanded ash wood exceeding 6 mm.
Sawn Ash Lumber 1x6
Thickness-planed ash (Fraxinus spp.) lumber measuring 1 inch thick by 6 inches wide, sawn lengthwise with thickness exceeding 6 mm. This lumber is planed but not end-jointed, and falls under the tariff item for sawn ash wood.
Sliced Ash Veneer Backing 8mm
Sliced ash (Fraxinus spp.) sheets, 8 mm thick, used as backing for laminated panels and planed on both sides. These sheets qualify for the tariff item as sliced wood exceeding 6 mm in thickness of ash species.
White Ash Lumber FAS Grade
First and Seconds (FAS) grade white ash (Fraxinus americana) lumber, sawn lengthwise and planed to 4/4 thickness over 6 mm. This premium grade is used for fine woodworking and falls under the tariff item for ash species wood that is sanded or planed.